ONU State O5 - Initial Status

[danielkot]

Hello i have a problem with ONT LXT-010H-D.
Cloned from ZTE zxhn f660: serial number, PON Serial number, Hardware Version, Software Version, set fake_ok
Got ONU ID and VLan as in screenshots
Bytes and packets are zero-ed, so it shouldn't be?
What's I'm doing wrong?

# omcicli mib get 84
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
VlanTagFilterData
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
=================================
EntityID: 0x101
FilterTbl[0]: PRI 1,CFI 0, VID 1108
FwdOp:  0x04
NumOfEntries: 1
=================================
=================================
EntityID: 0x4101
FilterTbl[0]: PRI 1,CFI 0, VID 1108
FwdOp:  0x0c
NumOfEntries: 1
=================================
#
#
# omcicli mib get 171
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
ExtVlanTagOperCfgData
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
#

[Anime4000]

ME 171 is missing, for this, you need to use HGU Firmware instead to simulate ONT-Router

[danielkot]

Where I can find this firmware?