TuxClocker 1.5.0

[Lurkki14]

Changelog

New features

• Added NVIDIA clock setting outside Xorg through NVML (possibly broken on some GPUs/NVML versions)
• RX 7000-series fan speed control

Bug fixes

• Fixed incorrect power usage reading on some CPUs
• The bundled build now works with NVIDIA; see README for how to run

Misc. changes

• Added option to disable building CPU plugin
• Added some fields to desktop file (tujhen)
• Two decimals are now shown in the GUI for readable values

Translations

• Finnish
• French (mrintrepide)
• Georgian (NorwayFun)
• German (Foliant2, Termuellinator)

---

This discussion was created from the release TuxClocker 1.5.0.

[lafluer56]

When i try to change the fan mode to manual and save, the fan mode line goes red.
I set the fan to 100%, but nothing happens. I am doing something wrong ?
I have the kernel 6.7.1 and a 7900xt with the open source drivers.

[Lurkki14]

I think I see the failure here, we are parsing the current fan curve and not changing the temperatures, but trying to set the temperature it shows is not actually within range.

[Lurkki14]

Also, does setting fan mode to Auto in TuxClocker after doing that reset the fan speed?

[lafluer56]

Ok, if i run the echo commands all works good.
If i set auto, manual in TuxClocker it doesn t erase the other commands.

Another problem is the display info in TuxClocker, the fan speed value seems ok, i get 100%, but for the mode, it displays 'no mode set'.

[Lurkki14]

Does echo "r" | sudo tee /sys/class/drm/card*/device/gpu_od/fan_ctrl/fan_curve reset the fan speed?

[lafluer56]

yes