DS925+

[wjz304]

安装系统阶段(junior) 跳过 HDD 必须由 Synology 制造 的磁盘限制

uring the installation phase (junior), skip the disk restriction that the HDD must be manufactured by Synology

1. Xpenology:
   RR boot will be handled by default, no need to pay attention
2. Synology:
   1. Open telnet via http://<ip>:5000/webman/start_telnet.cgi
   2. Log in to telnet via root, and execute the following command,
      printf '#!/bin/sh\nexit 0\n' >"/usr/syno/share/get_hcl_invalid_disks.sh"
   3. Refresh the web installation page.

[wjz304]

[wjz304]

[007revad]

There is also another way:

1. Open telnet via http://<NAS-IP>:5000/webman/start_telnet.cgi
2. Log in to telnet via root, and execute the following command,
   touch /tmp/installable_check_pass
3. Refresh the web installation page.

[chnjinzhe]

目前似乎有pci卡就无法启动，另一台无pci网卡则顺利安装启动。

[TheWorldIsGamble]

925不就已经不认其他硬盘了么？

[PeterSuh-Q3]

925不就已经不认其他硬盘了么？

是的，正版DS925+已经被封了。

[apriliars3]

I am testing DS925+ on Proxmox with Intel 8500 and not works. Same issue with DS1525+. Thanks