linux-next

GIT bdd4c30bd51d9037bf66f22af3fb3e0ec7a69c51

commit 4985c32ee4241d1aba1beeac72294faa46aaff10
Author: Lan Tianyu <[email protected]>
Date:   Wed Apr 30 15:46:33 2014 +0800

    ACPI / processor: Fix failure of loading acpi-cpufreq driver
    
    According commit d640113fe (ACPI: processor: fix acpi_get_cpuid for UP
    processor),  BIOS may not provide _MAT or MADT tables and acpi_get_apicid()
    always returns -1. For these cases, original code will pass apic_id with
    vaule of -1 to acpi_map_cpuid() and it will check the acpi_id. If acpi_id
    is equal to zero, ignores apic_id and return zero for CPU0.
    
    Commit b981513 (ACPI / scan: bail out early if failed to parse APIC
    ID for CPU) changed the behavior. Return ENODEV when find apic_id is
    less than zero after calling acpi_get_apicid(). This causes acpi-cpufreq
    driver fails to be loaded on some machines. This patch is to fix it.
    
    Fixes: b981513f806d (ACPI / scan: bail out early if failed to parse APIC ID for CPU)
    References: https://bugzilla.kernel.org/show_bug.cgi?id=73781
    Cc: 3.14+ <[email protected]> # 3.14+
    Reported-and-tested-by: KATO Hiroshi <[email protected]>
    Reported-and-tested-by: Stuart Foster <[email protected]>
    Signed-off-by: Lan Tianyu <[email protected]>
    Signed-off-by: Rafael J. Wysocki <[email protected]>

commit f2cc34cbaee306d8ea6ece0dcbbaf4c19444faf5
Author: Ralf Baechle <[email protected]>
Date:   Wed Apr 30 13:13:18 2014 +0200

    MIPS: math-emu: Don't needlessly pass a struct around.
    
    Signed-off-by: Ralf Baechle <[email protected]>

commit 5ffb0e1858aa21ae1f5ded65430cd5e248463890
Author: Ralf Baechle <[email protected]>
Date:   Wed Apr 30 11:09:44 2014 +0200

    MIPS: math-emu: Reduce mipsMIPS bloat.
    
    Move microMIPS32_to_MIPS32() to a separate file which only gets built
    for mipsMIPS configurations; for other configurations the optimizer
    eleminates calls to microMIPS32_to_MIPS32().
    
    Signed-off-by: Ralf Baechle <[email protected]>

commit da217aaa16d053ee3f99ee81fbe8a90a29de8a9f
Author: Ralf Baechle <[email protected]>
Date:   Wed Apr 30 11:21:55 2014 +0200

    MIPS: math-emu: Switch to using the MIPS rounding modes.
    
    Previously math-emu was using the IEEE-754 constants internally.  These
    were differing by having the constants for rounding to +/- infinity
    switched, so a conversion was necessary.  This would be entirely
    avoidable if the MIPS constants were used throughout, so get rid of
    the bloat.
    
    Signed-off-by: Ralf Baechle <[email protected]>

commit 90e839aa32328adce70ecf7f8aecc8e329b18d45
Author: Ralf Baechle <[email protected]>
Date:   Wed Apr 30 01:17:19 2014 +0200

    MIPS: math-emu: Nuke alternative names for IEEE-754 rounding modes.
    
    Signed-off-by: Ralf Baechle <[email protected]>

commit 4c6b4072da43920309df8dc4372bb61967b3e741
Author: Ralf Baechle <[email protected]>
Date:   Tue Apr 29 15:21:24 2014 +0200

    MIPS: Sort out mm_isBranchInstr.
    
    mm_isBranchInstr() did reside in the math emu code even though it logically
    is separate and also is used outside the math emu code.  In addition GCC 4.9.0
    leaves the following unnnecessarily bloated function body for a non-microMIPS
    configuration:
    
    <mm_isBranchInstr>:
        105c:       afa50004        sw      a1,4(sp)
        1060:       afa60008        sw      a2,8(sp)
        1064:       afa7000c        sw      a3,12(sp)
        1068:       03e00008        jr      ra
        106c:       00001021        move    v0,zero
    
    which stores arguments that are never going to be used on the stack frame.
    
    Move mm_isBranchInstr() from cp1emu.c to branch.c, then split mm_isBranchInstr()
    into a __mm_isBranchInstr() core and a mm_isBranchInstr() wrapper inline function
    which only invokes __mm_isBranchInstr() on microMIPS configurations.
    
    This shaves off 112 bytes off the kernel and improves code flow a bit.
    
    Signed-off-by: Ralf Baechle <[email protected]>

commit 1972ff35bcb83355e9829a54226451bd3419de5b
Author: Ralf Baechle <[email protected]>
Date:   Tue Apr 29 01:49:24 2014 +0200

    MIPS: Diable MIPS16/microMIPS crap for platforms not supporting these ASEs.
    
    Signed-off-by: Ralf Baechle <[email protected]>

commit be2ad4ab594139a09c7a71972752a53bdd5a9541
Author: Ralf Baechle <[email protected]>
Date:   Mon Apr 28 22:34:01 2014 +0200

    MIPS: math-emu: Inline fpu_emulator_init_fpu()
    
    Signed-off-by: Ralf Baechle <[email protected]>

commit 205eed26395b15621ee27f535b142d4a30b5e2af
Author: Ralf Baechle <[email protected]>
Date:   Sat Apr 26 01:49:14 2014 +0200

    MIPS: math-emu: Cleanup coding style.
    
     o Only define variables in the outermost block
     o One empty line at most
     o Format comments as per CodingStyle
     o Update FSF address in licensing term comment
     o Spell FPU and MIPS in all capitals.
     o Remove ####-type of lines in comments.
     o Try to make things a bit most consistent between sp_*.c / dp_*.c files.
    
    Signed-off-by: Ralf Baechle <[email protected]>

commit 716ead6c3d519e012e66b069a3ad70c4bfe5545f
Author: Ralf Baechle <[email protected]>
Date:   Fri Apr 25 15:48:40 2014 +0200

    MIPS: math-emu: Cleanup definition of structs describe sp/dp floats.
    
    Signed-off-by: Ralf Baechle <[email protected]>

commit d9d29fb7b97c41233036ea3f748e179b87765066
Author: Ralf Baechle <[email protected]>
Date:   Fri Apr 25 10:54:06 2014 +0200

    MIPS: math-emu: Rename get_rounding() functions.
    
    There are two version of get_rounding(), one for single precision, one
    for double precision.  Add a ieee754sp_ rsp. ieee754dp_ prefix for
    clarity.
    
    Signed-off-by: Ralf Baechle <[email protected]>

commit d8a30e453168fbf27366a0501561fab10a14483a
Author: Ralf Baechle <[email protected]>
Date:   Fri Apr 25 03:19:57 2014 +0200

    MIPS: math-emu: Get rid of the useless parts of exception handling.
    
    All it really did was throw a printk for no obvious reason.
    
    Signed-off-by: Ralf Baechle <[email protected]>

commit 00102ccacf0b4ddedf920fd90936efc3bc28fdf8
Author: Ralf Baechle <[email protected]>
Date:   Fri Apr 25 01:52:46 2014 +0200

    MIPS: math-emu: Move various objects into an ar library.
    
    ieee754d.o contains only debug code and dp_sqrt.o and sp_sqrt.o contain
    code which for MIPS I/II/III systems we don't want to link.  Again the
    savings can be considerable for some systems:
    
    $ mips-linux-size --totals ieee754d.o dp_sqrt.o sp_sqrt.o
       text	   data	    bss	    dec	    hex	filename
       1624	      0	      0	   1624	    658	ieee754d.o
       2016	      0	      0	   2016	    7e0	dp_sqrt.o
        736	      0	      0	    736	    2e0	sp_sqrt.o
       4376	      0	      0	   4376	   1118	(TOTALS)
    
    Signed-off-by: Ralf Baechle <[email protected]>

commit ba72c2bff9799daf98b9e41474830b14ae4f0235
Author: Ralf Baechle <[email protected]>
Date:   Fri Apr 25 00:40:42 2014 +0200

    MIPS: math-emu: Inline ieee754sp_issnan and ieee754dp_issnan.
    
    Shaves another 16 bytes off but more importantly avoids function calls.
    
    Signed-off-by: Ralf Baechle <[email protected]>

commit 901615320d62a23f8fbf6066ea111bb919ae6d77
Author: Ralf Baechle <[email protected]>
Date:   Fri Apr 25 00:29:50 2014 +0200

    MIPS: math-emu: Remove unused code.
    
    Shrinks the FPU emulator by 4528 bytes.
    
    Signed-off-by: Ralf Baechle <[email protected]>

commit 686c7831f0c9884682197f4963262251d0e59b72
Author: Ralf Baechle <[email protected]>
Date:   Tue Apr 22 17:11:01 2014 +0200

    MIPS: math-emu: Remove unused ieee754sp_bestnan() and ieee754dp_bestnan().
    
    Both are unused since lmo commit fdffbafbb38723618626c70ffdc6ff9175cdffa2
    [Lots of FPU bug fixes from Kjeld Borch Egevang.]
    
    Signed-off-by: Ralf Baechle <[email protected]>

commit e9e6315f4c9e51dfba1d6d04a39a4d4203a18bd8
Author: Ralf Baechle <[email protected]>
Date:   Tue Apr 22 16:52:01 2014 +0200

    MIPS: math-emu: Inline ieee754dp_finite and ieee754dp_finite().
    
    Signed-off-by: Ralf Baechle <[email protected]>

commit 0efd4e5319ca8063c00d1c4abfe6af3976942006
Author: Ralf Baechle <[email protected]>
Date:   Tue Apr 22 16:33:07 2014 +0200

    MIPS: math-emu: Eleminate duplicate definitions of identical macros.
    
    Signed-off-by: Ralf Baechle <[email protected]>

commit ebce471716566929d7741d3749465e662b8b7eb6
Author: Ralf Baechle <[email protected]>
Date:   Tue Apr 22 16:02:03 2014 +0200

    MIPS: math-emu: Use SPSIGN() rather than DPSIGN() in ieee754sp_sub().
    
    Signed-off-by: Ralf Baechle <[email protected]>

commit 4736f6c82064c48d8e8fda544fdb755dd2d6e3a2
Author: Ralf Baechle <[email protected]>
Date:   Tue Apr 22 15:51:55 2014 +0200

    MIPS: math-emu: Replace DP_MBITS with DP_FBITS and SP_MBITS with SP_FBITS.
    
    Both were defined as 23 rsp. 52 though the mentissa is actually a bit more
    than the fraction.
    
    Signed-off-by: Ralf Baechle <[email protected]>

commit dd562af3b03c3ff4129c0b4ab962643935a5762c
Author: Ralf Baechle <[email protected]>
Date:   Tue Apr 22 13:31:24 2014 +0200

    MIPS: math-emu: Call ieee754di_xcpt, not ieee754si_xcpt in ieee754dp_cmp.
    
    Signed-off-by: Ralf Baechle <[email protected]>

commit 28c80109e8ddd31a640786f119fd737fcc21d673
Author: Ralf Baechle <[email protected]>
Date:   Sun Apr 20 01:20:08 2014 +0200

    MIPS: math-emu: Cleanup stdarg usage including apparently bogus comment.
    
    Signed-off-by: Ralf Baechle <[email protected]>

commit ed51751f2a8c5070050e567e26471a1851af0f6a
Author: Ralf Baechle <[email protected]>
Date:   Sat Apr 19 23:01:34 2014 +0200

    MIPS: math-emu: Remove #if 1 and dead code from its #else branch.
    
    Signed-off-by: Ralf Baechle <[email protected]>

commit 7d377570c86ec27db24e118b6db7e23c0c7dee30
Author: Ralf Baechle <[email protected]>
Date:   Sat Apr 19 14:20:54 2014 +0200

    MIPS: math-emu: Cleanup ieee754si_indef() / ieee754di_indef().
    
    LONG_LONG_MAX is a symbol defined in <limits.h> which may not be available
    so better rely on something provided by a kernel header.  While at it,
    turn these function-like macros into inline functions.
    
    Signed-off-by: Ralf Baechle <[email protected]>

commit 47afdfb05fc1ada6dab0dce0b56318c46191237e
Author: Ralf Baechle <[email protected]>
Date:   Sat Apr 19 14:03:37 2014 +0200

    MIPS: math-emu: Convert debug printks to pr_debug getting.
    
    And another bunch of #ifdefs bite the dust.
    
    Signed-off-by: Ralf Baechle <[email protected]>

commit 14806c44887eba0e08a82571a248bfa10d3d5ce0
Author: Ralf Baechle <[email protected]>
Date:   Sat Apr 19 13:18:08 2014 +0200

    MIPS: math-emu: Get rid of unuable extended precision support.
    
    No usable functionality and nothig does ever define IEEE854_XP anyway.
    
    Signed-off-by: Ralf Baechle <[email protected]>

commit cd4f463270109c1af32de2f252500832de3f542a
Author: Ralf Baechle <[email protected]>
Date:   Fri Apr 25 15:52:18 2014 +0200

    MIPS: IP22: This platform may come with either MIPS III or MIPS IV CPUs.
    
    Signed-off-by: Ralf Baechle <[email protected]>

commit f5d9f0d858c453177b65bf5c1fc4dc2bac60ec78
Author: Ralf Baechle <[email protected]>
Date:   Sat Apr 19 13:11:37 2014 +0200

    MIPS: math-emu: Remove most ifdefery.
    
    Most of these tests should be runtime tests.  This also finally means
    that on a MIPS III systems MIPS IV opcodes are going to result in an
    exception as they're supposed to.
    
    Signed-off-by: Ralf Baechle <[email protected]>

commit 77780b5f2b07ea492b116d4b6869763bb40691dc
Author: Ralf Baechle <[email protected]>
Date:   Sat Apr 19 00:36:32 2014 +0200

    MIPS: math-emu: Turn macros into functions where possible.
    
    Signed-off-by: Ralf Baechle <[email protected]>

commit 9285476701712dd9c10fd5b0ac6b149d87a576cc
Author: Ralf Baechle <[email protected]>
Date:   Sat Apr 19 00:15:40 2014 +0200

    MIPS: math-emu: Harden ieee754int.h against multiple inclusion.
    
    The header file had no include guards; this only happened to work because
    the file only contains macro definitions and protypes.
    
    Signed-off-by: Ralf Baechle <[email protected]>

commit 25c5450fa5de273285c3ffece87e962432984b3f
Author: Ralf Baechle <[email protected]>
Date:   Wed Apr 16 11:00:12 2014 +0200

    MIPS: math-emu: Reformat code according to coding style.
    
    Signed-off-by: Ralf Baechle <[email protected]>

commit ef3b11ea239ba6b5cc8ffc6abea54d9af27d4565
Author: Ralf Baechle <[email protected]>
Date:   Wed Apr 16 02:46:11 2014 +0200

    MIPS: math-emu: Move all debug fs code to a separate file.
    
    Signed-off-by: Ralf Baechle <[email protected]>

commit c387da86eb331e1b60c97023d8d01c8a9adeb816
Author: Ralf Baechle <[email protected]>
Date:   Wed Apr 16 02:24:08 2014 +0200

    MIPS: math-emu: Remove fine example of cargo cult programming.
    
    Signed-off-by: Ralf Baechle <[email protected]>

commit 245d8273576c9abc0d8114eb8fe6899ea4f90674
Author: Ralf Baechle <[email protected]>
Date:   Wed Apr 16 02:09:53 2014 +0200

    MIPS: math-emu: Header file weeding.
    
    Signed-off-by: Ralf Baechle <[email protected]>

commit 06d38d9c0764cc47cdbee808f657726d90a66ea9
Author: Ralf Baechle <[email protected]>
Date:   Wed Apr 16 02:09:04 2014 +0200

    MIPS: branch: Make inclusion of <asm/branch.h> safe.
    
    It was relying on other headers having been included before.
    
    Signed-off-by: Ralf Baechle <[email protected]>

commit b1bd59690e8a31303ae68f00ef88d25b27a3a18e
Author: Ralf Baechle <[email protected]>
Date:   Wed Apr 16 01:59:03 2014 +0200

    MIPS: math-emu: Use helpers to manipulate CAUSEF_BD flag.
    
    Signed-off-by: Ralf Baechle <[email protected]>

commit 9266256b4b17a59937171516e8e0990df74a4e96
Author: Ralf Baechle <[email protected]>
Date:   Wed Apr 16 01:52:32 2014 +0200

    MIPS: branch: New helpers to modify branch delay slot flag in struct pt_regs
    
    Signed-off-by: Ralf Baechle <[email protected]>

commit a7375a04fdd80fad105fc4394e2df1400f9547c2
Author: Ralf Baechle <[email protected]>
Date:   Wed Apr 16 01:31:11 2014 +0200

    MIPS: math-emu: Get rid of typedefs.
    
    Signed-off-by: Ralf Baechle <[email protected]>

commit a43bbf810e9d5d07902b958085b3bb9da938f836
Author: Ralf Baechle <[email protected]>
Date:   Wed Apr 16 01:16:02 2014 +0200

    MIPS: math-emu: Use English spelling of `constant' rather than Danish.
    
    Signed-off-by: Ralf Baechle <[email protected]>

commit 4bed0701d3f817c5727a7f7c693e50cbd4f85854
Author: Ralf Baechle <[email protected]>
Date:   Wed Apr 16 00:47:59 2014 +0200

    MIPS: math-emu: Mark exception handling functions as __cold.
    
    Optimizes the code flow and shaves of half a percent of the math-emu
    code size.
    
    Signed-off-by: Ralf Baechle <[email protected]>

commit 2055b05e09d9afb04a1b0a65e2e092a53b52b14a
Author: Ralf Baechle <[email protected]>
Date:   Wed Apr 16 00:40:02 2014 +0200

    MIPS: math-emu: Use __BITFIELD_FIELD to eleminate redundant definitions.
    
    Union _ieee754sp was even duplicated even though there are no endian
    dependencies in it all.
    
    Signed-off-by: Ralf Baechle <[email protected]>

commit 3a8e0f1b5c26ec41dded7e3b870e6f079f130ee6
Author: Ralf Baechle <[email protected]>
Date:   Wed Apr 16 00:39:02 2014 +0200

    MIPS: Move definition of __BITFIELD_FIELD to sharable header.
    
    Signed-off-by: Ralf Baechle <[email protected]>

commit 96bc2c97ecf70f51b70fe201b27caff3f2543f11
Author: Ralf Baechle <[email protected]>
Date:   Wed Apr 16 00:31:51 2014 +0200

    MIPS: inst.h: Rename BITFIELD_FIELD to __BITFIELD_FIELD.
    
    <uapi/asm/inst.h> is exported to userland so the macro name BITFIELD_FIELD
    pollutes the namespace.  Prefix the name with __ fixes this.
    
    Signed-off-by: Ralf Baechle <[email protected]>

commit 2c9b25c59796e9e5f01193d15dde501e9af59714
Author: Christian Engelmayer <[email protected]>
Date:   Sat Feb 8 20:02:21 2014 +0100

    drm: qxl: Remove unused device pointer
    
    Remove occurrences of unused struct qxl_device pointer in functions
    qxl_ttm_fault() and qxl_init_mem_type().
    
    Detected by Coverity: CID 1019128, CID 1019129.
    
    Signed-off-by: Christian Engelmayer <[email protected]>
    Signed-off-by: Dave Airlie <[email protected]>

commit 3723aaa123147dc777bf86d7104b8fc4b3b56ff3
Author: Ralf Baechle <[email protected]>
Date:   Wed Apr 16 00:31:51 2014 +0200

    MIPS: inst.h: Rename BITFIELD_FIELD to __BITFIELD_FIELD.
    
    <uapi/asm/inst.h> is exported to userland so the macro name BITFIELD_FIELD
    pollutes the namespace.  Prefix the name with __ fixes this.
    
    Signed-off-by: Ralf Baechle <[email protected]>

commit d7f369636745788e64ac217f610dad381fb5431c
Author: Ralf Baechle <[email protected]>
Date:   Fri Apr 11 18:28:00 2014 +0200

    MIPS: Remove file missed when removing rm9k support a while ago.
    
    Signed-off-by: Ralf Baechle <[email protected]>

commit a68ce6507a4545f1fc83c035603234d7898a0dc3
Author: Aaro Koskinen <[email protected]>
Date:   Thu Apr 3 22:24:01 2014 +0300

    MIPS/loongson2_cpufreq: Fix CPU clock rate setting
    
    Loongson2 has been using (incorrectly) kHz for cpu_clk rate. This has
    been unnoticed, as loongson2_cpufreq was the only place where the rate
    was set/get. After commit 652ed95d5fa6074b3c4ea245deb0691f1acb6656
    (cpufreq: introduce cpufreq_generic_get() routine) things however broke,
    and now loops_per_jiffy adjustments are incorrect (1000 times too long).
    The patch fixes this by changing cpu_clk rate to Hz.
    
    Signed-off-by: Aaro Koskinen <[email protected]>
    Cc: [email protected]
    Cc: Rafael J. Wysocki <[email protected]>
    Cc: Viresh Kumar <[email protected]>
    Cc: [email protected]
    Cc: [email protected]
    Cc: [email protected]
    Cc: Aaro Koskinen <[email protected]>
    Patchwork: https://patchwork.linux-mips.org/patch/6678/
    Signed-off-by: Ralf Baechle <[email protected]>

commit d3b8acbdaaaebe2dd85d96f4c49b63bf6cc35896
Author: Paul Bolle <[email protected]>
Date:   Thu Apr 3 11:10:20 2014 +0200

    MIPS: Loongson: No need to select GENERIC_HARDIRQS_NO__DO_IRQ
    
    Commit 0e476d91244e ("MIPS: Loongson: Add Loongson-3 Kconfig options")
    added "select GENERIC_HARDIRQS_NO__DO_IRQ". But the Kconfig symbol
    GENERIC_HARDIRQS_NO__DO_IRQ was already removed in v2.6.38, so that
    select is a nop. Drop it.
    
    Signed-off-by: Paul Bolle <[email protected]>
    Cc: [email protected]
    Cc: [email protected]
    Patchwork: https://patchwork.linux-mips.org/patch/6677/
    Signed-off-by: Ralf Baechle <[email protected]>

commit fa3357d9e109352f42c231fc3833e10951845185
Author: Maciej W. Rozycki <[email protected]>
Date:   Fri Apr 4 03:32:54 2014 +0100

    MIPS: csum_partial.S CPU_DADDI_WORKAROUNDS bug fix
    
    This change reverts most of commit
    60724ca59eda766a30be57aec6b49bc3e2bead91 [MIPS: IP checksums: Remove
    unncessary .set pseudos] that introduced warnings with the
    CPU_DADDI_WORKAROUNDS option set:
    
    arch/mips/lib/csum_partial.S: Assembler messages:
    arch/mips/lib/csum_partial.S:467: Warning: used $3 with ".set at=$3"
    arch/mips/lib/csum_partial.S:467: Warning: used $3 with ".set at=$3"
    arch/mips/lib/csum_partial.S:467: Warning: used $3 with ".set at=$3"
    arch/mips/lib/csum_partial.S:467: Warning: used $3 with ".set at=$3"
    arch/mips/lib/csum_partial.S:467: Warning: used $3 with ".set at=$3"
    arch/mips/lib/csum_partial.S:467: Warning: used $3 with ".set at=$3"
    arch/mips/lib/csum_partial.S:467: Warning: used $3 with ".set at=$3"
    arch/mips/lib/csum_partial.S:467: Warning: used $3 with ".set at=$3"
    arch/mips/lib/csum_partial.S:467: Warning: used $3 with ".set at=$3"
    arch/mips/lib/csum_partial.S:467: Warning: used $3 with ".set at=$3"
    [...]
    arch/mips/lib/csum_partial.S:577: Warning: used $3 with ".set at=$3"
    arch/mips/lib/csum_partial.S:577: Warning: used $3 with ".set at=$3"
    arch/mips/lib/csum_partial.S:577: Warning: used $3 with ".set at=$3"
    arch/mips/lib/csum_partial.S:601: Warning: used $3 with ".set at=$3"
    arch/mips/lib/csum_partial.S:601: Warning: used $3 with ".set at=$3"
    arch/mips/lib/csum_partial.S:601: Warning: used $3 with ".set at=$3"
    arch/mips/lib/csum_partial.S:601: Warning: used $3 with ".set at=$3"
    [and so on, and so on...]
    
    The warnings are benign and good code is produced regardless because no
    macros that'd use the assembler's temporary register are involved, however
    the `.set noat' directives removed by the commit referred are crucial to
    guarantee this is still going to be the case after any changes in the
    future.  Therefore they need to be brought back to place which this
    change does.
    
    Signed-off-by: Maciej W. Rozycki <[email protected]>
    Cc: [email protected]
    Patchwork: https://patchwork.linux-mips.org/patch/6686/
    Signed-off-by: Ralf Baechle <[email protected]>

commit 8faecff616e986f26651fe7d762d3a7ef52a659c
Author: Maciej W. Rozycki <[email protected]>
Date:   Fri Apr 4 03:32:29 2014 +0100

    MIPS: __strncpy_from_user_asm CPU_DADDI_WORKAROUNDS bug fix
    
    This corrects assembler warnings and broken code generated in
    __strncpy_from_user_asm:
    
    arch/mips/lib/strncpy_user.S: Assembler messages:
    arch/mips/lib/strncpy_user.S:52: Warning: Macro instruction expanded into
    multiple instructions in a branch delay slot
    
    with the CPU_DADDI_WORKAROUNDS option set.  The function schedules delay
    slots manually where there is really no need to as GAS is happy to do it
    all itself, so undo it all and remove `.set noreorder'.
    
    Signed-off-by: Maciej W. Rozycki <[email protected]>
    Cc: [email protected]
    Patchwork: https://patchwork.linux-mips.org/patch/6685/
    Signed-off-by: Ralf Baechle <[email protected]>

commit 32da28eff6b732b64d4ab4c3d511e7fe718ff3d9
Author: Maciej W. Rozycki <[email protected]>
Date:   Tue Apr 1 00:57:28 2014 +0100

    MIPS: __delay CPU_DADDI_WORKAROUNDS bug fix
    
    With CPU_DADDI_WORKAROUNDS enabled __delay assembles with a macro in a
    branch delay slot:
    
    {standard input}: Assembler messages:
    {standard input}:18: Warning: Macro instruction expanded into multiple
    instructions in a branch delay slot
    
    and broken code results:
    
    0000000000000000 <__delay>:
       0:	1480ffff 	bnez	a0,0 <__delay>
       4:	24010001 	li	at,1
       8:	0081202f 	dsubu	a0,a0,at
       c:	03e00008 	jr	ra
      10:	00000000 	nop
      14:	00000000 	nop
    
    Consequently the function loops indefinitely, showing up prominently as a
    hang in the delay loop calibration at bootstrap.
    
    This change corrects the problem by forcing the immediate 1 into a
    register while keeping code produced identical where CPU_DADDI_WORKAROUNDS
    is disabled.
    
    Signed-off-by: Maciej W. Rozycki <[email protected]>
    Cc: [email protected]
    Patchwork: https://patchwork.linux-mips.org/patch/6669/
    Signed-off-by: Ralf Baechle <[email protected]>

commit 5da3e85530328543c66313d4dbbb3b426f838eb5
Author: Maciej W. Rozycki <[email protected]>
Date:   Tue Apr 1 00:14:41 2014 +0100

    MIPS: DEC/SNI: O32 wrapper stack switching fixes
    
    Commit 231a35d37293ab88d325a9cb94e5474c156282c0 [[MIPS] RM: Collected
    changes] broke DECstation support by introducing an incompatible copy of
    arch/mips/dec/prom/call_o32.S in arch/mips/fw/lib/, built unconditionally.
    The copy happens to land earlier of the two among the modules used in the
    link and is therefore chosen for the DECstation rather than the intended
    original.  As a result random kernel data is corrupted because a pointer
    to the "%s" formatted output template is used as a temporary stack pointer
    rather than being passed down to prom_printf.  This also explains why
    prom_printf still works, up to a point -- the next argument is the actual
    string to output so it works just fine as the output template until enough
    kernel data has been corrupted to cause a crash.
    
    This change adjusts the modified wrapper in arch/mips/fw/lib/call_o32.S to
    let callers request no stack switching by passing a null temporary stack
    pointer in $a1, reworks the DECstation callers to work with the updated
    interface and removes the old copy from arch/mips/dec/prom/call_o32.S.  A
    few minor readability adjustments are included as well, most importantly
    O32_SZREG is now used throughout where applicable rather than hardcoded
    multiplies of 4 and $fp is used to access the argument save area as a more
    usual register to operate the stack with rather than $s0.
    
    Finally an update is made to the temporary stack space used by the SNI
    platform to guarantee 8-byte alignment as per o32 requirements.
    
    Signed-off-by: Maciej W. Rozycki <[email protected]>
    Cc: Thomas Bogendoerfer <[email protected]>
    Cc: [email protected]
    Patchwork: https://patchwork.linux-mips.org/patch/6668/
    Signed-off-by: Ralf Baechle <[email protected]>

commit 54777d14e2ab5703c212ef0a9913db76d03f158d
Author: Maciej W. Rozycki <[email protected]>
Date:   Mon Mar 31 23:51:30 2014 +0100

    MIPS: DEC: Bus error handler <asm/cpu-type.h> fixes
    
    Commit 69f24d1784b631b81a54eb57c49bf46536dd2382 [MIPS: Optimize
    current_cpu_type() for better code.] missed an update for two DECstation
    bus error support files that now do not build, this is a fix.
    
    Signed-off-by: Maciej W. Rozycki <[email protected]>
    Cc: [email protected]
    Patchwork: https://patchwork.linux-mips.org/patch/6667/
    Signed-off-by: Ralf Baechle <[email protected]>

commit c5a8cf7a7ad5ab022660015597380b554f4358e5
Author: Ralf Baechle <[email protected]>
Date:   Thu Apr 3 13:29:06 2014 +0200

    MAINTAINERS: TURBOchannel: Update entry
    
    Add mailing list and patchwork URL so patches now have a defined path.
    Also add myself as a TURBOchannel maintainer.  However Maciej is going
    to the the resident TURBOchannel guru.
    
    Signed-off-by: Ralf Baechle <[email protected]>
    Acked-by: "Maciej W. Rozycki" <[email protected]>

commit 8c6dbb589be1fe83bd0d8db8681a37e9d2f17bd9
Author: Ralf Baechle <[email protected]>
Date:   Thu Apr 3 13:14:05 2014 +0200

    Revert "MIPS: MT: proc: Add support for printing VPE and TC ids"
    
    Reverts commit 795038a6910937fa167d47f6f6183db0eb8fb706 because
    d6d3c9afaab47418ab2d7f874fb8aeac1f067104 provides the same functionality
    in a more generic way.  Both patches applied however means that the
    VPE and TC IDs get printed twice currently.

commit b87577b7c768683736eea28f70779e8c75b4df62
Author: Dave Airlie <[email protected]>
Date:   Thu May 1 09:26:53 2014 +1000

    drm: try harder to avoid regression when merging mode bits
    
    For QXL hw we really want the bits to be replaced as we change
    the preferred mode on the fly, and the same goes for virgl when
    I get to it, however the original fix for this seems to have caused
    a wierd regression on Intel G33 that in a stunning display of failure
    at opposition to his normal self, Daniel failed to diagnose.
    
    So we are left doing this, ugly ugly ugly ugly, Daniel you fixed
    that G33 yet?, ugly, ugly.
    
    Tested-by: Marc-André Lureau <[email protected]>
    Signed-off-by: Dave Airlie <[email protected]>

commit 28c015a9daabe4ed3aeb0ccf669a3f1c2b8b81d5
Author: Murali Karicheri <[email protected]>
Date:   Thu Mar 20 22:08:32 2014 +0200

    mtd: davinci-nand: disable subpage write for keystone-nand
    
    Sub page write doesn't work because of hw issue in controller found on
    Keystone SOCs. AEMIF controller is also used on DaVinci SOCs which
    don't seems to have any issue. So add "ti,keysone-nand" compatible
    to nand driver in order to set NAND_NO_SUBPAGE_WRITE option.
    
    Cc: Warner Losh <[email protected]>
    Signed-off-by: Murali Karicheri <[email protected]>
    Signed-off-by: Ivan Khoronzhuk <[email protected]>
    Acked-by: Santosh Shilimkar <[email protected]>
    Signed-off-by: Brian Norris <[email protected]>

commit 5a4e58bc693f04aa650219784e5e339e0db6b902
Author: Liu Ping Fan <[email protected]>
Date:   Thu Nov 21 10:17:54 2013 +0800

    powerpc/mm: use macro PGTABLE_EADDR_SIZE instead of digital
    
    In case of extending the eaddr in future, use this macro
    PGTABLE_EADDR_SIZE to ease the maintenance of the code.
    
    Signed-off-by: Liu Ping Fan <[email protected]>
    Signed-off-by: Benjamin Herrenschmidt <[email protected]>

commit d5b35cffe3d3c2bc297b7c1fb997a6139de02e12
Author: Alistair Popple <[email protected]>
Date:   Mon Feb 24 18:00:56 2014 +1100

    ppc476: Enable a linker work around for IBM errata #46
    
    This patch adds an option to enable a work around for an icache bug on
    476 that can cause execution of stale instructions when falling
    through pages (IBM errata #46). It requires a recent version of
    binutils which supports the --ppc476-workaround option.
    
    The work around enables the appropriate linker options and ensures
    that all module output sections are aligned to 4K page boundaries. The
    work around is only required when building modules.
    
    Signed-off-by: Alistair Popple <[email protected]>
    Signed-off-by: Benjamin Herrenschmidt <[email protected]>

commit e2c37d908336dc27c8b405f063c2a163124947fa
Author: Alistair Popple <[email protected]>
Date:   Thu Mar 6 14:52:28 2014 +1100

    powerpc: Added PCI MSI support using the HSTA module
    
    The PPC476GTR SoC supports message signalled interrupts (MSI) by writing
    to special addresses within the High Speed Transfer Assist (HSTA) module.
    
    This patch adds support for PCI MSI with a new system device. The DMA
    window is also updated to allow access to the entire 42-bit address range
    to allow PCI devices write access to the HSTA module.
    
    Signed-off-by: Alistair Popple <[email protected]>
    Signed-off-by: Benjamin Herrenschmidt <[email protected]>

commit 2a2c74b2efcb1a0ca3fdcb5fbb96ad8de6a29177
Author: Alistair Popple <[email protected]>
Date:   Thu Mar 6 14:52:27 2014 +1100

    IBM Akebono: Add the Akebono platform
    
    This patch adds support for the IBM Akebono board.
    
    Signed-off-by: Alistair Popple <[email protected]>
    Signed-off-by: Benjamin Herrenschmidt <[email protected]>

commit 6b11930f726c1d8a7c054f7a293621bce4c684c5
Author: Alistair Popple <[email protected]>
Date:   Thu Mar 6 14:52:26 2014 +1100

    IBM Currituck: Clean up board specific code before adding Akebono code
    
    The IBM Akebono code uses the same initialisation functions as the
    earlier Currituck board. Rather than create a copy of this code for
    Akebono we will instead integrate support for it into the same file as
    the Currituck code.
    
    This patch just renames the board support file and updates the Makefile.
    
    Signed-off-by: Alistair Popple <[email protected]>
    Signed-off-by: Benjamin Herrenschmidt <[email protected]>

commit 983d8a6dda1d477f3ffa23a04cc2fa4d66fd93d1
Author: Tony Breeds <[email protected]>
Date:   Wed Mar 12 19:17:07 2014 +1100

    powerpc/le: Show the endianess of the LPAR under PowerVM.
    
    Signed-off-by: Tony Breeds <[email protected]>
    Signed-off-by: Benjamin Herrenschmidt <[email protected]>

commit 9048e648bc22d7b59093f8ca1978c5767893aaa5
Author: Alexander Graf <[email protected]>
Date:   Tue Apr 1 15:46:05 2014 +0200

    powerpc: Use 64k io pages when we never see an HEA
    
    When we never get around to seeing an HEA ethernet adapter, there's
    no point in restricting ourselves to 4k IO page size.
    
    This speeds up IO maps when CONFIG_IBMEBUS is disabled.
    
    [ Updated the test to also lift the restriction on arch 2.07
      (Power 8) which cannot have an HEA
     -- BenH ]
    
    Signed-off-by: Alexander Graf <[email protected]>
    Signed-off-by: Benjamin Herrenschmidt <[email protected]>
    
    foo

commit 605ee08ffa84e385e11ca85346d4fa7892aebc76
Author: Helge Deller <[email protected]>
Date:   Wed Apr 30 23:26:02 2014 +0200

    parisc,metag: Do not hardcode maximum userspace stack size
    
    This patch affects only architectures where the stack grows upwards
    (currently parisc and metag only). On those do not hardcode the maximum
    initial stack size to 1GB, but make it configurable via a config option.
    
    The main problem with the hardcoded stack size is, that we have two
    memory regions which grow upwards: stack and heap. To keep most of the
    memory available for heap in a flexmap memoy layout, it makes no sense
    to hard allocate up to 1GB of the memory for stack which can't be used
    as heap then.
    
    This patch makes the stack size configurable and uses 80MB as default
    value which has been in use during the last few years on parisc and
    which didn't showed any problems yet.
    
    Signed-off-by: Helge Deller <[email protected]>
    Cc: [email protected]
    Cc: [email protected]
    Cc: John David Anglin <[email protected]>

commit a8d22396302b7e4e5f0a594c1c1594388c29edaf
Author: Rafael J. Wysocki <[email protected]>
Date:   Wed Apr 30 22:36:33 2014 +0200

    PNP / ACPI: Do not return errors if _DIS or _SRS are not present
    
    The ACPI PNP subsystem returns errors from pnpacpi_set_resources()
    and pnpacpi_disable_resources() if the _SRS or _DIS methods are not
    present, respectively, but it should not do that, because those
    methods are optional.  For this reason, modify pnpacpi_set_resources()
    and pnpacpi_disable_resources(), respectively, to ignore missing _SRS
    or _DIS.
    
    This problem has been uncovered by commit 202317a573b2 (ACPI / scan:
    Add acpi_device objects for all device nodes in the namespace) and
    manifested itself by causing serial port suspend to fail on some
    systems.
    
    Fixes: 202317a573b2 (ACPI / scan: Add acpi_device objects for all device nodes in the namespace)
    References: https://bugzilla.kernel.org/show_bug.cgi?id=74371
    Reported-by: wxg4net <[email protected]>
    Reported-and-tested-by: <[email protected]>
    Cc: 3.14+ <[email protected]> # 3.14+
    Signed-off-by: Rafael J. Wysocki <[email protected]>

commit 22041fb05b66387b2854f789d1e1f55c7d07b4f4
Author: KY Srinivasan <[email protected]>
Date:   Wed Apr 30 11:58:25 2014 -0700

    hyperv: Properly handle checksum offload
    
    Do checksum offload only if the client of the driver wants checksum to be
    offloaded.
    
    In V1 version of this patch, I  addressed comments from
    Stephen Hemminger <[email protected]> and
    Eric Dumazet <[email protected]>.
    
    In this version of the patch I have addressed comments from
    David Miller.
    
    This patch fixes a bug that is exposed in gateway scenarios.
    
    Signed-off-by: K. Y. Srinivasan <[email protected]>
    Reviewed-by: Haiyang Zhang <[email protected]>
    Signed-off-by: David S. Miller <[email protected]>

commit 6ce29b0e2a04ea85617cd21099af67449a76f589
Author: Claudiu Manoil <[email protected]>
Date:   Wed Apr 30 14:27:21 2014 +0300

    gianfar: Avoid unnecessary reg accesses in adjust_link()
    
    For phy devices that don't issue interrupts upon link
    state changes, phylib polls the link state resulting in
    repeated calls to adjust_link(), even if the link state
    didn't change.  As a result, some mac registers are
    repeatedly read and written with the same values, which
    is not ok.
    
    To fix this, adjust_link() has been refactored to check
    first whether the link state has changed and to take action
    only if needed, updating mac registers and local state
    variables.  The 'new_state' local flag, set if one of the
    link params changed (link, speed or duplex), has been
    rendered useless and removed by this refactoring.
    
    Signed-off-by: Claudiu Manoil <[email protected]>
    Signed-off-by: David S. Miller <[email protected]>

commit 0cda345d1b2201dd15591b163e3c92bad5191745
Author: Liu Yu <[email protected]>
Date:   Wed Apr 30 17:34:09 2014 +0800

    tcp_cubic: fix the range of delayed_ack
    
    commit b9f47a3aaeab (tcp_cubic: limit delayed_ack ratio to prevent
    divide error) try to prevent divide error, but there is still a little
    chance that delayed_ack can reach zero. In case the param cnt get
    negative value, then ratio+cnt would overflow and may happen to be zero.
    As a result, min(ratio, ACK_RATIO_LIMIT) will calculate to be zero.
    
    In some old kernels, such as 2.6.32, there is a bug that would
    pass negative param, which then ultimately leads to this divide error.
    
    commit 5b35e1e6e9c (tcp: fix tcp_trim_head() to adjust segment count
    with skb MSS) fixed the negative param issue. However,
    it's safe that we fix the range of delayed_ack as well,
    to make sure we do not hit a divide by zero.
    
    CC: Stephen Hemminger <[email protected]>
    Signed-off-by: Liu Yu <[email protected]>
    Signed-off-by: Eric Dumazet <[email protected]>
    Acked-by: Neal Cardwell <[email protected]>
    Signed-off-by: David S. Miller <[email protected]>

commit e5744fe9d262d11131916d04ea79ea539fe296c0
Author: Brendan Hickey <[email protected]>
Date:   Wed Apr 30 10:24:38 2014 +0200

    bpf_dbg: fix wrong register usage
    
    The AND instruction is erroneously using the X register instead
    of the K register.
    
    Signed-off-by: Brendan Hickey <[email protected]>
    Signed-off-by: Daniel Borkmann <[email protected]>
    Signed-off-by: David S. Miller <[email protected]>

commit f114890cdf84d753f6b41cd0cc44ba51d16313da
Author: Vlad Yasevich <[email protected]>
Date:   Tue Apr 29 10:09:51 2014 -0400

    Revert "macvlan : fix checksums error when we are in bridge mode"
    
    This reverts commit 12a2856b604476c27d85a5f9a57ae1661fc46019.
    The commit above doesn't appear to be necessary any more as the
    checksums appear to be correctly computed/validated.
    
    Additionally the above commit breaks kvm configurations where
    one VM is using a device that support checksum offload (virtio) and
    the other VM does not.
    In this case, packets leaving virtio device will have CHECKSUM_PARTIAL
    set.  The packets is forwarded to a macvtap that has offload features
    turned off.  Since we use CHECKSUM_UNNECESSARY, the host does does not
    update the checksum and thus a bad checksum is passed up to
    the guest.
    
    CC: Daniel Lezcano <[email protected]>
    CC: Patrick McHardy <[email protected]>
    CC: Andrian Nord <[email protected]>
    CC: Eric Dumazet <[email protected]>
    CC: Michael S. Tsirkin <[email protected]>
    CC: Jason Wang <[email protected]>
    Signed-off-by: Vlad Yasevich <[email protected]>
    Acked-by: Michael S. Tsirkin <[email protected]>
    Acked-by: Jason Wang <[email protected]>
    Signed-off-by: David S. Miller <[email protected]>

commit cbdb04279ccaefcc702c8757757eea8ed76e50cf
Author: Vlad Yasevich <[email protected]>
Date:   Tue Apr 29 10:09:50 2014 -0400

    mactap: Fix checksum errors for non-gso packets in bridge mode
    
    The following is a problematic configuration:
    
     VM1: virtio-net device connected to macvtap0@eth0
     VM2: e1000 device connect to macvtap1@eth0
    
    The problem is is that virtio-net supports checksum offloading
    and thus sends the packets to the host with CHECKSUM_PARTIAL set.
    On the other hand, e1000 does not support any acceleration.
    
    For small TCP packets (and this includes the 3-way handshake),
    e1000 ends up receiving packets that only have a partial checksum
    set.  This causes TCP to fail checksum validation and to drop
    packets.  As a result tcp connections can not be established.
    
    Commit 3e4f8b787370978733ca6cae452720a4f0c296b8
    	macvtap: Perform GSO on forwarding path.
    fixes this issue for large packets wthat will end up undergoing GSO.
    This commit adds a check for the non-GSO case and attempts to
    compute the checksum for partially checksummed packets in the
    non-GSO case.
    
    CC: Daniel Lezcano <[email protected]>
    CC: Patrick McHardy <[email protected]>
    CC: Andrian Nord <[email protected]>
    CC: Eric Dumazet <[email protected]>
    CC: Michael S. Tsirkin <[email protected]>
    CC: Jason Wang <[email protected]>
    Signed-off-by: Vlad Yasevich <[email protected]>
    Acked-by: Jason Wang <[email protected]>
    Signed-off-by: David S. Miller <[email protected]>

commit fc9f35010641ea85dd19d144b86cdd93156f1a1e
Author: Eric Dumazet <[email protected]>
Date:   Mon Apr 28 22:00:29 2014 -0700

    tcp: increment retransmit counters in tlp and fast open
    
    Both TLP and Fast Open call __tcp_retransmit_skb() instead of
    tcp_retransmit_skb() to avoid changing tp->retrans_out.
    
    This has the side effect of missing SNMP counters increments as well
    as tcp_info tcpi_total_retrans updates.
    
    Fix this by moving the stats increments of into __tcp_retransmit_skb()
    
    Signed-off-by: Eric Dumazet <[email protected]>
    Acked-by: Nandita Dukkipati <[email protected]>
    Acked-by: Neal Cardwell <[email protected]>
    Signed-off-by: David S. Miller <[email protected]>

commit 3dc638d13aced7baad40517a3d70b3b43bf6b90f
Author: Byungho An <[email protected]>
Date:   Tue Apr 29 13:15:27 2014 +0900

    net: sxgbe: Added set function for interrupt on complete
    
    This patch adds set_rx_int_on_com function for interrupt when
    dma is completed.
    
    Signed-off-by: Byungho An <[email protected]>
    Signed-off-by: David S. Miller <[email protected]>

commit 325b94f7e63080f3e371e35f063a8be138c1873b
Author: Byungho An <[email protected]>
Date:   Tue Apr 29 13:15:17 2014 +0900

    net: sxgbe: Added rxqueue enable function
    
    This patch adds rxqueue enable function according to number of rxqueue
    and adds rxqueue disable function for removing.
    
    Signed-off-by: Byungho An <[email protected]>
    Signed-off-by: David S. Miller <[email protected]>

commit 0a0347b1e65d0757024d9db0ffdeafb41a9d14f4
Author: Byungho An <[email protected]>
Date:   Tue Apr 29 13:15:15 2014 +0900

    net: sxgbe: sw reset moved to probe function
    
    This patch moves sw reset to probe function because
    sw reset is needed early stage before open function.
    
    Signed-off-by: Byungho An <[email protected]>
    Signed-off-by: David S. Miller <[email protected]>

commit d2e752db6d05374a35dddb2e17864fe310fbcf69
Author: Roland Dreier <[email protected]>
Date:   Mon Apr 28 17:36:20 2014 -0700

    cxgb4: Decode PCIe Gen3 link speed
    
    Add handling for " 8 GT/s" in print_port_info().
    
    Signed-off-by: Roland Dreier <[email protected]>
    Signed-off-by: David S. Miller <[email protected]>

commit 652f99ead8319941216c64d7f92c8dcdc9b95970
Author: Tobias Klauser <[email protected]>
Date:   Mon Apr 28 23:23:13 2014 +0200

    Altera TSE: Add missing include to silence sparse warnings
    
    This fixes the following sparse warnings:
    
    drivers/net/ethernet/altera/altera_msgdma.c:23:5: warning: symbol 'msgdma_initialize' was not declared. Should it be static?
    drivers/net/ethernet/altera/altera_msgdma.c:28:6: warning: symbol 'msgdma_uninitialize' was not declared. Should it be static?
    drivers/net/ethernet/altera/altera_msgdma.c:32:6: warning: symbol 'msgdma_reset' was not declared. Should it be static?
    drivers/net/ethernet/altera/altera_msgdma.c:77:6: warning: symbol 'msgdma_disable_rxirq' was not declared. Should it be static?
    drivers/net/ethernet/altera/altera_msgdma.c:83:6: warning: symbol 'msgdma_enable_rxirq' was not declared. Should it be static?
    drivers/net/ethernet/altera/altera_msgdma.c:89:6: warning: symbol 'msgdma_disable_txirq' was not declared. Should it be static?
    drivers/net/ethernet/altera/altera_msgdma.c:95:6: warning: symbol 'msgdma_enable_txirq' was not declared. Should it be static?
    drivers/net/ethernet/altera/altera_msgdma.c:101:6: warning: symbol 'msgdma_clear_rxirq' was not declared. Should it be static?
    drivers/net/ethernet/altera/altera_msgdma.c:107:6: warning: symbol 'msgdma_clear_txirq' was not declared. Should it be static?
    drivers/net/ethernet/altera/altera_msgdma.c:114:5: warning: symbol 'msgdma_tx_buffer' was not declared. Should it be static?
    drivers/net/ethernet/altera/altera_msgdma.c:129:5: warning: symbol 'msgdma_tx_completions' was not declared. Should it be static?
    drivers/net/ethernet/altera/altera_msgdma.c:154:5: warning: symbol 'msgdma_add_rx_desc' was not declared. Should it be static?
    drivers/net/ethernet/altera/altera_msgdma.c:181:5: warning: symbol 'msgdma_rx_status' was not declared. Should it be static?
    
    Signed-off-by: Tobias Klauser <[email protected]>
    Acked-by: Vince Bridgers <[email protected]>
    Signed-off-by: David S. Miller <[email protected]>

commit 1b4448815ee746f878ca4c6b8fffa23441f6d16c
Author: Tobias Klauser <[email protected]>
Date:   Mon Apr 28 23:23:01 2014 +0200

    Altera TSE: Fix DMA secriptor length initialization
    
    sgdma_descrip is a function name as well as the name of a struct. In
    sgdma_initialize(), we should initialize the descriptor length field
    with the actual length of a descriptor not with the size of the
    function. In order to prevent such things from happening in the future,
    rename the function to sgdma_setup_descrip().
    
    Found by sparse which yields the following warning:
    
    drivers/net/ethernet/altera/altera_sgdma.c:74:30: warning: expression using sizeof on a function
    
    Signed-off-by: Tobias Klauser <[email protected]>
    Signed-off-by: David S. Miller <[email protected]>

commit ec4a340789be16831ae96be5f7552238a7a6e903
Author: Lars Ellenberg <[email protected]>
Date:   Mon Apr 28 18:43:35 2014 +0200

    drbd: use list_first_entry_or_null in first_peer_device/first_connection
    
    If there are no peer_devices or connections, I'd rather have NULL
    than some "arbitrary" address pretending to point to a struct.
    
    Helps to avoid hard to debug symptoms, in case we ever try to use
    and dereference a drbd_connection or drbd_peer_device
    where we in fact don't have any connection at all.
    
    Signed-off-by: Philipp Reisner <[email protected]>
    Signed-off-by: Lars Ellenberg <[email protected]>
    Signed-off-by: Jens Axboe <[email protected]>

commit babea49ebe010d0a533b5db20fa63c327402a71c
Author: Philipp Reisner <[email protected]>
Date:   Mon Apr 28 18:43:34 2014 +0200

    drbd: Allow attaching of a newly created device to any backing device
    
    A newly created device was never exposed before, i.e. has a
    exposed_data_uuid of 0. Then it is valid to attach to any current_uuid
    of a backing device (of course also to a newly created one (4))
    
    Signed-off-by: Philipp Reisner <[email protected]>
    Signed-off-by: Lars Ellenberg <[email protected]>
    Signed-off-by: Jens Axboe <[email protected]>

commit 02df6fe145715f1d3858c0c65aed991f148b70b4
Author: Philipp Reisner <[email protected]>
Date:   Mon Apr 28 18:43:33 2014 +0200

    drbd: Test cstate while holding req_lock
    
    In case a connection transitions into C_TIMEOUT within the timer
    function (request_timer_fn()) we need to make sure that the receiver
    thread (potentially running on a different CPU) sees the updated
    cstate later on.
    
    Signed-off-by: Philipp Reisner <[email protected]>
    Signed-off-by: Lars Ellenberg <[email protected]>
    Signed-off-by: Jens Axboe <[email protected]>

commit c1b3156f121fd301191e0b4c5fa2fec42cd17871
Author: Philipp Reisner <[email protected]>
Date:   Mon Apr 28 18:43:32 2014 +0200

    drbd: use blk_set_stacking_limits()
    
    ...instead directly assigning to q->limits.discard_zeroes_data
    
    Signed-off-by: Philipp Reisner <[email protected]>
    Signed-off-by: Lars Ellenberg <[email protected]>
    Signed-off-by: Jens Axboe <[email protected]>

commit 08535466bce6bd91320990b9a614d52a3dc0f21d
Author: Lars Ellenberg <[email protected]>
Date:   Mon Apr 28 18:43:31 2014 +0200

    drbd: evaluate disk and network timeout on different requests
    
    Just because it is the oldest not yet completed request
    does not make it the oldest request waiting for disk.
    Or waiting for the peer.
    
    And we completely missed already completed requests
    that would still hold references to activity log extents,
    waiting only for the barrier ack.
    
    Find two oldest not yet completely processed requests,
    one that is still waiting for local completion,
    and one that is still waiting for some response from the peer.
    These may or may not be the same request object.
    
    Then separately apply the network and disk timeouts, respectively.
    
    Signed-off-by: Philipp Reisner <[email protected]>
    Signed-off-by: Lars Ellenberg <[email protected]>
    Signed-off-by: Jens Axboe <[email protected]>

commit 67cca286caa6e33f3134bd36834d2484538f4f78
Author: Philipp Reisner <[email protected]>
Date:   Mon Apr 28 18:43:30 2014 +0200

    drbd: Fix a hole in the challange-response connection authentication
    
    In the implementation as it was, the two peers sent each other
    a challenge, and expects the challenge hashed with the shared
    secret back.
    
    A attacker could simply wait for the challenge of the peer, and
    send the same challenge back. Then it waits for the response, and
    sends the same response back.
    
    Prevent this by not accepting a challenge from the peer that is
    the same as the challenge sent to the peer.
    
    Signed-off-by: Philipp Reisner <[email protected]>
    Signed-off-by: Lars Ellenberg <[email protected]>
    Signed-off-by: Jens Axboe <[email protected]>

commit f9c78128f833ae3057884ca219259c8ae5db8898
Author: Lars Ellenberg <[email protected]>
Date:   Mon Apr 28 18:43:29 2014 +0200

    drbd: always implicitly close last epoch when idle
    
    Once our sender thread needs to wait_for_work(),
    and actually needs to schedule(), just before we do that,
    we already check if it is useful to implicitly close the last epoch.
    
    The condition was too strict: only implicitly close the epoch,
    if there have been no new (write) requests at all.
    
    The assumption was that if there were new requests, they would
    always be communicated one way or another, and would send necessary
    epoch separating barriers explicitly.
    
    This is not always true, e.g. when becoming diskless,
    or while explicitly starting a full resync.
    
    The last communicated epoch could stay open for a long time,
    locking down corresponding activity log extents.
    
    It is safe to always implicitly send that last barrier, as soon as we
    determin that there cannot be more requests in the last communicated
    epoch, even if there have been (uncommunicated) new requests in new
    epochs meanwhile.
    
    Signed-off-by: Philipp Reisner <[email protected]>
    Signed-off-by: Lars Ellenberg <[email protected]>
    Signed-off-by: Jens Axboe <[email protected]>

commit e4d7d6f4d36daff6aad84f96e48debde8e6ed09e
Author: Lars Ellenberg <[email protected]>
Date:   Mon Apr 28 18:43:28 2014 +0200

    drbd: add back some fairness to AL transactions
    
    When batching more updates to the activity log into single transactions,
    we lost the ability for new requests to force themselves into the active
    set: all preparation steps became non-blocking, and if all currently
    hot extents keep busy, they could starve out new incoming requests
    to cold extents for quite a while.
    
    This can only happen if your IO backend accepts more IO operations per
    average DRBD replication round trip time than you have al-extents
    configured.
    
    If we have incoming requests to cold extents,
    at least do one blocking update per transaction.
    
    In an artificial worst-case workload on SSD with an asynchronous 600 ms
    replication link, with al-extents = 7 (the minimum we allow), and
    concurrent full resynch, without this patch, some write requests have
    been observed to be starved for 40 seconds.
    With this patch, application observed a worst case latency of twice the
    replication round trip time.
    
    Signed-off-by: Philipp Reisner <[email protected]>
    Signed-off-by: Lars Ellenberg <[email protected]>
    Signed-off-by: Jens Axboe <[email protected]>

commit fa090e708a72f0ea9cbe067fba28cfb2b8b787af
Author: Lars Ellenberg <[email protected]>
Date:   Mon Apr 28 18:43:27 2014 +0200

    drbd: keep max-bio size during detach/attach on disconnected primary
    
    We want to store in persistent meta data what the peer DRBD can handle,
    which, due to spreading requests to multiple bios,
    may be more than its backing device can handle.
    
    Otherwise, if a disconnected Primary temporarily loses access to its local data
    as well, we may accidentally shrink the max-bio setting, portentially causing
    already assembled, but not yet processed, application bios to be spuriously
    failed due to device limits.
    
    Signed-off-by: Philipp Reisner <[email protected]>
    Signed-off-by: Lars Ellenberg <[email protected]>
    Signed-off-by: Jens Axboe <[email protected]>

commit 074f4afeb2277bd5ecb9fa7f91eaffa55e262126
Author: Lars Ellenberg <[email protected]>
Date:   Mon Apr 28 18:43:26 2014 +0200

    drbd: fix a race between start_resync and send_and_submit
    
    In the drbd make request function, specifically in
    drbd_send_and_submit(), we decide whether we want to send the actual
    write request, or only a "set this block out of sync" information.
    
    We do so based on the current connection state, while holding the req_lock.
    The connection state is not supposed to change while holding the req_lock.
    
    But in drbd_start_resync, we did change that state anyways,
    while only holding the global_state_lock, which is enough to change
    sync-after dependencies (paused vs active resync), but
    not good enough to change the connection state.
    
    Fix: in drbd_start_resync, first grab the req_lock to serialize with
    drbd_send_and_submit(), before grabbing the global_state_lock
    to be able to evaluate the sync-after dependencies.
    
    Signed-off-by: Philipp Reisner <[email protected]>
    Signed-off-by: Lars Ellenberg <[email protected]>
    Signed-off-by: Jens Axboe <[email protected]>

commit 20c68fdea1646ed746abf19122d7699493927005
Author: Lars Ellenberg <[email protected]>
Date:   Mon Apr 28 18:43:25 2014 +0200

    drbd: Enable QUEUE_FLAG_DISCARD only if the peer can recieve P_TRIM
    
    Allow the user of REQ_DISCARD.
    
    Signed-off-by: Philipp Reisner <[email protected]>
    Signed-off-by: Lars Ellenberg <[email protected]>
    Signed-off-by: Jens Axboe <[email protected]>

commit 2f632aeb5302da93f760d965e970600b35907026
Author: Lars Ellenberg <[email protected]>
Date:   Mon Apr 28 18:43:24 2014 +0200

    drbd: prepare sending side for REQ_DISCARD
    
    Note that I do NOT call __drbd_chk_io_error for failed REQ_DISCARD.
    That may be wrong, though, or needs to differ between EOPNOTSUPP and
    other errors...
    
    Signed-off-by: Philipp Reisner <[email protected]>
    Signed-off-by: Lars Ellenberg <[email protected]>
    Signed-off-by: Jens Axboe <[email protected]>

commit a0fb3c47a1aae5d38a88ea858f14d6d088d05e07
Author: Lars Ellenberg <[email protected]>
Date:   Mon Apr 28 18:43:23 2014 +0200

    drbd: prepare receiving side for REQ_DISCARD
    
    If the receiver needs to serve a discard request on a queue that does
    not announce to be discard cabable, it falls back to do synchronous
    blkdev_issue_zeroout().
    
    We expect only "reasonably" large (up to one activity log extent?)
    discard requests.
    
    We do this to not to not block the receiver for too long in this
    fallback code path, and to not set/clear too many bits inside one
    spinlock_irq_save() in drbd_set_in_sync/drbd_set_out_of_sync,
    
    Signed-off-by: Philipp Reisner <[email protected]>
    Signed-off-by: Lars Ellenberg <[email protected]>
    Signed-off-by: Jens Axboe <[email protected]>

commit 9e276872fe1665ea158f0c6f40df13008fed2908
Author: Lars Ellenberg <[email protected]>
Date:   Mon Apr 28 18:43:22 2014 +0200

    drbd: allow parallel promote/demote actions
    
    We plan to use genl_family->parallel_ops = true in the future,
    but need to review all possible interactions first.
    
    For now, only selectively drop genl_lock() in drbd_set_role(),
    instead serializing on our own internal resource->conf_update mutex.
    
    We now can be promoted/demoted on many resources in parallel,
    which may significantly improve cluster failover times
    when fencing is required.
    
    Signed-off-by: Philipp Reisner <[email protected]>
    Signed-off-by: Lars Ellenberg <[email protected]>
    Signed-off-by: Jens Axboe <[email protected]>

commit a910b12352f5ddee712c3423c31fbb8b312dde88
Author: Lars Ellenberg <[email protected]>
Date:   Mon Apr 28 18:43:21 2014 +0200

    drbd: perpare for genetlink parallel_ops
    
    Because all administrative requests via genetlink have been globally
    serialized via genl_lock(), we used to have one static struct
    drbd_config_context "admin context".
    
    Move this on-stack to the respective callback functions.
    
    This will allow us to selectively drop the genl_lock()
    (or use genl_family->parallel_ops) in the future.
    
    Signed-off-by: Philipp Reisner <[email protected]>
    Signed-off-by: Lars Ellenberg <[email protected]>
    Signed-off-by: Jens Axboe <[email protected]>

commit 88ea685d33c75932fe90ed0b5d2cf68845462876
Author: Philipp Reisner <[email protected]>
Date:   Mon Apr 28 18:43:20 2014 +0200

    drbd: Do not BUG() when connection breaks in a special way
    
    When a 'cluster wide' disconnect executes, the result comes back
    from the peer, and immediately after that the connection breaks
    then _conn_rq_cond() reported back SS_CW_SUCCESS.
    Therefore _conn_request_state() calls conn_set_state(), which
    has a BUG() in it.
    The BUG() is hit because conn_is_valid_transition() does not like
    the transaction. Which goes back to is_valid_soft_transition()
    returning SS_OUTDATE_WO_CONN.
    
    This fix is to consider an error reported by is_valid_soft_transition()
    even when the peer agreed to the transaction.
    
    Signed-off-by: Philipp Reisner <[email protected]>
    Signed-off-by: Lars Ellenberg <[email protected]>
    Signed-off-by: Jens Axboe <[email protected]>

commit e82998743385ca861b9ec919eb2ba8177ce72180
Author: Lars Ellenberg <[email protected]>
Date:   Mon Apr 28 18:43:19 2014 +0200

    drbd: don't let application IO pre-empt resync too often
    
    Before, application IO could pre-empt resync activity
    for up to hardcoded 20 seconds per resync request.
    A very busy server could throttle the effective resync bandwidth
    down to one request per 20 seconds.
    
    Now, we only let application IO pre-empt resync traffic
    while the current resync rate estimate is above c-min-rate.
    
    If you disable the c-min-rate throttle feature (set c-min-rate = 0),
    application IO will no longer pre-empt resync traffic at all.
    
    Signed-off-by: Philipp Reisner <[email protected]>
    Signed-off-by: Lars Ellenberg <[email protected]>
    Signed-off-by: Jens Axboe <[email protected]>

commit 0e49d7b014c5d591a053d08888a455bd74a88646
Author: Lars Ellenberg <[email protected]>
Date:   Mon Apr 28 18:43:18 2014 +0200

    drbd: fix potential distributed deadlock during verify or resync
    
    If max-buffers and socket buffer sizes are "too small" for the chosen
    resync rate, this could lead potentially lead to a distributed deadlock,
    which may or may not resolve itself via the "ko-count" and request
    timeout mechanism, or could be resolved by forced disconnect.
    
    One option to deal with this is proper configuration:
    use larger max-buffer and socket buffers settings,
    or reduce the resync rate.
    
    But even with bad configuration we should not deadlock,
    but "gracefully" recover.
    
    The issue is avoided by using only up to max-buffers/2 for resync
    requests, and by using max-buffers not as a hard limit for data buffer
    allocations, but as a throttle threshold only.
    
    Signed-off-by: Philipp Reisner <[email protected]>
    Signed-off-by: Lars Ellenberg <[email protected]>
    Signed-off-by: Jens Axboe <[email protected]>

commit 6377b9235056452cd5d592c3739baa379a8735fe
Author: Lars Ellenberg <[email protected]>
Date:   Mon Apr 28 18:43:17 2014 +0200

    drbd: resync: fix too large bursts for very slow rates
    
    While merging adjacent dirty blocks into resync requests,
    the resync rate throttle was disregarded.
    For very low resync rates, the effective rate may have exceeded
    the intended rate by a larger margin.
    
    Signed-off-by: Philipp Reisner <[email protected]>
    Signed-off-by: Lars Ellenberg <[email protected]>
    Signed-off-by: Jens Axboe <[email protected]>

commit 9ae472605ad333d4db07da95cc42c68063d2cc0d
Author: Lars Ellenberg <[email protected]>
Date:   Mon Apr 28 18:43:16 2014 +0200

    drbd: fix stalled resync detection in /proc/drbd
    
    If we don't make resync or verify progress for "too long",
    we want to flag it as "stalled".
    
    Since 2010, "use rolling marks for resync speed calculation"
    this "too long" was wrong by a factor of HZ.
    With HZ 250, it would have been flagged as stalled
    after 100 minutes.
    
    Hardcode 3 minutes instead.
    
    Signed-off-by: Philipp Reisner <[email protected]>
    Signed-off-by: Lars Ellenberg <[email protected]>
    Signed-off-by: Jens Axboe <[email protected]>

commit cdc6af8df42313d632cb9ed79dd455daecbd8478
Author: Philipp Reisner <[email protected]>
Date:   Mon Apr 28 18:43:15 2014 +0200

    drbd: Allow online layout change of AL while peer is not connected
    
    If a user forces the operation he takes the blame in case
    the peer does not have enough space. No reason to dey this...
    
    Signed-off-by: Philipp Reisner <[email protected]>
    Signed-off-by: Lars Ellenberg <[email protected]>
    Signed-off-by: Jens Axboe <[email protected]>

commit d40e567149c7ac250344d1537261c87b2c3e852c
Author: Philipp Reisner <[email protected]>
Date:   Mon Apr 28 18:43:14 2014 +0200

    drbd: Remove drbd_wrappers.h
    
    Signed-off-by: Philipp Reisner <[email protected]>
    Signed-off-by: Lars Ellenberg <[email protected]>
    Signed-off-by: Jens Axboe <[email protected]>

commit d7fe69c6a1940c3f9c5bed08634b6dd868612cdf
Author: Philipp Reisner <[email protected]>
Date:   Mon Apr 28 18:43:13 2014 +0200

    drbd: Leave IO suspended if the fence handler find the peer primary
    
    Actually we are clearing the susp_fen flag if we are not going
    to call a fencing handler.
    
    For setting the susp_fen flag needs to be edge-triggerd, and not
    level triggered.
    
    Signed-off-by: Philipp Reisner <[email protected]>
    Signed-off-by: Lars Ellenberg <[email protected]>
    Signed-off-by: Jens Axboe <[email protected]>

commit 31007745a5f328b8d70d865c4a6118be01421b8c
Author: Philipp Reisner <[email protected]>
Date:   Mon Apr 28 18:43:12 2014 +0200

    drbd: Break a deadlock while concurrent fencing and establishing a connection
    
    When we need to outdate the peer while being promoted to primary,
    and the connection gets established at the same time, we deadlock
    in drbd_try_outdate_peer() when trying to clear the susp_fen
    bit.
    
    Fix this by setting the STATE_SENT bit while holding the mutex.
    
    Using drbd_change_state(.. , CS_HARD, ..) which does not block
    until STATE_SENT is cleared, is only for clearness. It does
    not contribute anything to the fix.
    
    Signed-off-by: Philipp Reisner <[email protected]>
    Signed-off-by: Lars Ellenberg <[email protected]>
    Signed-off-by:…

Author: mmotm auto import

.gitignore

@@ -22,7 +22,6 @@
 *.lst
 *.symtypes
 *.order
-modules.builtin
 *.elf
 *.bin
 *.gz
@@ -33,6 +32,8 @@ modules.builtin
 *.lzo
 *.patch
 *.gcno
+modules.builtin
+Module.symvers
 
 #
 # Top-level generic files
@@ -44,7 +45,6 @@ modules.builtin
 /vmlinuz
 /System.map
 /Module.markers
-/Module.symvers
 
 #
 # Debian directory (make deb-pkg)

Documentation/ABI/testing/sysfs-bus-iio

@@ -210,6 +210,14 @@ Contact:	[email protected]
 Description:
 		Scaled humidity measurement in milli percent.
 
+What:		/sys/bus/iio/devices/iio:deviceX/in_X_mean_raw
+KernelVersion:	3.5
+Contact:	[email protected]
+Description:
+		Averaged raw measurement from channel X. The number of values
+		used for averaging is device specific. The converting rules for
+		normal raw values also applies to the averaged raw values.
+
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_offset
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_x_offset
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_y_offset

Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935

@@ -0,0 +1,16 @@
+What		/sys/bus/iio/devices/iio:deviceX/in_proximity_raw
+Date:		March 2014
+KernelVersion:	3.15
+Contact:	Matt Ranostay <[email protected]>
+Description:
+		Get the current distance in meters of storm (1km steps)
+		1000-40000 = distance in meters
+
+What		/sys/bus/iio/devices/iio:deviceX/sensor_sensitivity
+Date:		March 2014
+KernelVersion:	3.15
+Contact:	Matt Ranostay <[email protected]>
+Description:
+		Show or set the gain boost of the amp, from 0-31 range.
+		18 = indoors (default)
+		14 = outdoors

Documentation/ABI/testing/sysfs-bus-pci

@@ -117,7 +117,7 @@ Description:
 
 What:		/sys/bus/pci/devices/.../vpd
 Date:		February 2008
-Contact:	Ben Hutchings <[email protected]>
+Contact:	Ben Hutchings <[email protected]>
 Description:
 		A file named vpd in a device directory will be a
 		binary file containing the Vital Product Data for the

Documentation/ABI/testing/sysfs-driver-hid-thingm

@@ -0,0 +1,56 @@
+What:		/sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_req
+Date:		Feb 2014
+Contact:	Li Jun <[email protected]>
+Description:
+		Can be set and read.
+		Set a_bus_req(A-device bus request) input to be 1 if
+		the application running on the A-device wants to use the bus,
+		and to be 0 when the application no longer wants to use
+		the bus(or wants to work as peripheral). a_bus_req can also
+		be set to 1 by kernel in response to remote wakeup signaling
+		from the B-device, the A-device should decide to resume the bus.
+
+		Valid values are "1" and "0".
+
+		Reading: returns 1 if the application running on the A-device
+		is using the bus as host role, otherwise 0.
+
+What:		/sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_drop
+Date:		Feb 2014
+Contact:	Li Jun <[email protected]>
+Description:
+		Can be set and read
+		The a_bus_drop(A-device bus drop) input is 1 when the
+		application running on the A-device wants to power down
+		the bus, and is 0 otherwise, When a_bus_drop is 1, then
+		the a_bus_req shall be 0.
+
+		Valid values are "1" and "0".
+
+		Reading: returns 1 if the bus is off(vbus is turned off) by
+			 A-device, otherwise 0.
+
+What:		/sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req
+Date:		Feb 2014
+Contact:	Li Jun <[email protected]>
+Description:
+		Can be set and read.
+		The b_bus_req(B-device bus request) input is 1 during the time
+		that the application running on the B-device wants to use the
+		bus as host, and is 0 when the application no longer wants to
+		work as host and decides to switch back to be peripheral.
+
+		Valid values are "1" and "0".
+
+		Reading: returns if the application running on the B device
+		is using the bus as host role, otherwise 0.
+
+What:		/sys/bus/platform/devices/ci_hdrc.0/inputs/a_clr_err
+Date:		Feb 2014
+Contact:	Li Jun <[email protected]>
+Description:
+		Only can be set.
+		The a_clr_err(A-device Vbus error clear) input is used to clear
+		vbus error, then A-device will power down the bus.
+
+		Valid value is "1"

Documentation/ABI/testing/sysfs-platform-chipidea-usb-otg

@@ -100,6 +100,7 @@
 !Finclude/net/cfg80211.h wdev_priv
 !Finclude/net/cfg80211.h ieee80211_iface_limit
 !Finclude/net/cfg80211.h ieee80211_iface_combination
+!Finclude/net/cfg80211.h cfg80211_check_combinations
       </chapter>
       <chapter>
       <title>Actions and configuration</title>

Documentation/DocBook/80211.tmpl

@@ -79,7 +79,7 @@
   <partintro>
     <para>
       This first part of the DRM Developer's Guide documents core DRM code,
-      helper libraries for writting drivers and generic userspace interfaces
+      helper libraries for writing drivers and generic userspace interfaces
       exposed by DRM drivers.
     </para>
   </partintro>
@@ -341,22 +341,14 @@ char *date;</synopsis>
         </para>
         <sect4>
           <title>Managed IRQ Registration</title>
-          <para>
-            Both the <function>drm_irq_install</function> and
-	    <function>drm_irq_uninstall</function> functions get the device IRQ by
-	    calling <function>drm_dev_to_irq</function>. This inline function will
-	    call a bus-specific operation to retrieve the IRQ number. For platform
-	    devices, <function>platform_get_irq</function>(..., 0) is used to
-	    retrieve the IRQ number.
-          </para>
           <para>
             <function>drm_irq_install</function> starts by calling the
             <methodname>irq_preinstall</methodname> driver operation. The operation
             is optional and must make sure that the interrupt will not get fired by
             clearing all pending interrupt flags or disabling the interrupt.
           </para>
           <para>
-            The IRQ will then be requested by a call to
+            The passed-in IRQ will then be requested by a call to
             <function>request_irq</function>. If the DRIVER_IRQ_SHARED driver
             feature flag is set, a shared (IRQF_SHARED) IRQ handler will be
             requested.
@@ -459,7 +451,7 @@ char *date;</synopsis>
       providing a solution to every graphics memory-related problems, GEM
       identified common code between drivers and created a support library to
       share it. GEM has simpler initialization and execution requirements than
-      TTM, but has no video RAM management capabitilies and is thus limited to
+      TTM, but has no video RAM management capabilities and is thus limited to
       UMA devices.
     </para>
     <sect2>
@@ -889,7 +881,7 @@ int (*prime_fd_to_handle)(struct drm_device *dev,
 	    vice versa. Drivers must use the kernel dma-buf buffer sharing framework
 	    to manage the PRIME file descriptors. Similar to the mode setting
 	    API PRIME is agnostic to the underlying buffer object manager, as
-	    long as handles are 32bit unsinged integers.
+	    long as handles are 32bit unsigned integers.
 	  </para>
 	  <para>
 	    While non-GEM drivers must implement the operations themselves, GEM
@@ -2356,7 +2348,7 @@ void intel_crt_init(struct drm_device *dev)
       first create properties and then create and associate individual instances
       of those properties to objects. A property can be instantiated multiple
       times and associated with different objects. Values are stored in property
-      instances, and all other property information are stored in the propery
+      instances, and all other property information are stored in the property
       and shared between all instances of the property.
     </para>
     <para>
@@ -2697,10 +2689,10 @@ int num_ioctls;</synopsis>
   <sect1>
     <title>Legacy Support Code</title>
     <para>
-      The section very brievely covers some of the old legacy support code which
+      The section very briefly covers some of the old legacy support code which
       is only used by old DRM drivers which have done a so-called shadow-attach
       to the underlying device instead of registering as a real driver. This
-      also includes some of the old generic buffer mangement and command
+      also includes some of the old generic buffer management and command
       submission code. Do not use any of this in new and modern drivers.
     </para>
 
@@ -2950,6 +2942,11 @@ int num_ioctls;</synopsis>
 	This sections covers all things related to the GEM implementation in the
 	i915 driver.
       </para>
+      <sect2>
+        <title>Batchbuffer Parsing</title>
+!Pdrivers/gpu/drm/i915/i915_cmd_parser.c batch buffer command parser
+!Idrivers/gpu/drm/i915/i915_cmd_parser.c
+      </sect2>
     </sect1>
   </chapter>
 </part>

Documentation/DocBook/drm.tmpl

@@ -12,6 +12,8 @@ lockdep-splat.txt
 	- RCU Lockdep splats explained.
 NMI-RCU.txt
 	- Using RCU to Protect Dynamic NMI Handlers
+rcu_dereference.txt
+	- Proper care and feeding of return values from rcu_dereference()
 rcubarrier.txt
 	- RCU and Unloadable Modules
 rculist_nulls.txt

Documentation/RCU/00-INDEX

@@ -114,12 +114,16 @@ over a rather long period of time, but improvements are always welcome!
 			http://www.openvms.compaq.com/wizard/wiz_2637.html
 
 		The rcu_dereference() primitive is also an excellent
-		documentation aid, letting the person reading the code
-		know exactly which pointers are protected by RCU.
+		documentation aid, letting the person reading the
+		code know exactly which pointers are protected by RCU.
 		Please note that compilers can also reorder code, and
 		they are becoming increasingly aggressive about doing
-		just that.  The rcu_dereference() primitive therefore
-		also prevents destructive compiler optimizations.
+		just that.  The rcu_dereference() primitive therefore also
+		prevents destructive compiler optimizations.  However,
+		with a bit of devious creativity, it is possible to
+		mishandle the return value from rcu_dereference().
+		Please see rcu_dereference.txt in this directory for
+		more information.
 
 		The rcu_dereference() primitive is used by the
 		various "_rcu()" list-traversal primitives, such