Merge tag 'at91-fixes-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes

AT91 fixes #2 for 5.15:

- More fixes for AT91 platform power management code related to the
  introduction of sama7g5:
  - management of DDR3L regulator rails for sama7g5ek
  - loading of TLB on different cores

- PIO controller slew-rate settings for sama7g5ek: be aligned with
  datasheet requirements.

* tag 'at91-fixes-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: dts: at91: sama7g5ek: to not touch slew-rate for SDMMC pins
  ARM: dts: at91: sama7g5ek: use proper slew-rate settings for GMACs
  ARM: at91: pm: preload base address of controllers in tlb
  ARM: at91: pm: group constants and addresses loading
  ARM: dts: at91: sama7g5ek: add suspend voltage for ddr3l rail

Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>

Author: arndb

arch/arm/boot/dts/at91-sama7g5ek.dts

@@ -196,11 +196,13 @@
 
 					regulator-state-standby {
 						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <1350000>;
 						regulator-mode = <4>;
 					};
 
 					regulator-state-mem {
 						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <1350000>;
 						regulator-mode = <4>;
 					};
 				};
@@ -353,7 +355,10 @@
 	#address-cells = <1>;
 	#size-cells = <0>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gmac0_default &pinctrl_gmac0_txck_default &pinctrl_gmac0_phy_irq>;
+	pinctrl-0 = <&pinctrl_gmac0_default
+		     &pinctrl_gmac0_mdio_default
+		     &pinctrl_gmac0_txck_default
+		     &pinctrl_gmac0_phy_irq>;
 	phy-mode = "rgmii-id";
 	status = "okay";
 
@@ -368,7 +373,9 @@
 	#address-cells = <1>;
 	#size-cells = <0>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gmac1_default &pinctrl_gmac1_phy_irq>;
+	pinctrl-0 = <&pinctrl_gmac1_default
+		     &pinctrl_gmac1_mdio_default
+		     &pinctrl_gmac1_phy_irq>;
 	phy-mode = "rmii";
 	status = "okay";
 
@@ -423,14 +430,20 @@
 			 <PIN_PA15__G0_TXEN>,
 			 <PIN_PA30__G0_RXCK>,
 			 <PIN_PA18__G0_RXDV>,
-			 <PIN_PA22__G0_MDC>,
-			 <PIN_PA23__G0_MDIO>,
 			 <PIN_PA25__G0_125CK>;
+		slew-rate = <0>;
+		bias-disable;
+	};
+
+	pinctrl_gmac0_mdio_default: gmac0_mdio_default {
+		pinmux = <PIN_PA22__G0_MDC>,
+			 <PIN_PA23__G0_MDIO>;
 		bias-disable;
 	};
 
 	pinctrl_gmac0_txck_default: gmac0_txck_default {
 		pinmux = <PIN_PA24__G0_TXCK>;
+		slew-rate = <0>;
 		bias-pull-up;
 	};
 
@@ -447,8 +460,13 @@
 			 <PIN_PD25__G1_RX0>,
 			 <PIN_PD26__G1_RX1>,
 			 <PIN_PD27__G1_RXER>,
-			 <PIN_PD24__G1_RXDV>,
-			 <PIN_PD28__G1_MDC>,
+			 <PIN_PD24__G1_RXDV>;
+		slew-rate = <0>;
+		bias-disable;
+	};
+
+	pinctrl_gmac1_mdio_default: gmac1_mdio_default {
+		pinmux = <PIN_PD28__G1_MDC>,
 			 <PIN_PD29__G1_MDIO>;
 		bias-disable;
 	};
@@ -540,13 +558,15 @@
 				 <PIN_PA8__SDMMC0_DAT5>,
 				 <PIN_PA9__SDMMC0_DAT6>,
 				 <PIN_PA10__SDMMC0_DAT7>;
+			slew-rate = <0>;
 			bias-pull-up;
 		};
 
 		ck_cd_rstn_vddsel {
 			pinmux = <PIN_PA0__SDMMC0_CK>,
 				 <PIN_PA2__SDMMC0_RSTN>,
 				 <PIN_PA11__SDMMC0_DS>;
+			slew-rate = <0>;
 			bias-pull-up;
 		};
 	};
@@ -558,6 +578,7 @@
 				 <PIN_PC0__SDMMC1_DAT1>,
 				 <PIN_PC1__SDMMC1_DAT2>,
 				 <PIN_PC2__SDMMC1_DAT3>;
+			slew-rate = <0>;
 			bias-pull-up;
 		};
 
@@ -566,6 +587,7 @@
 				 <PIN_PB28__SDMMC1_RSTN>,
 				 <PIN_PC5__SDMMC1_1V8SEL>,
 				 <PIN_PC4__SDMMC1_CD>;
+			slew-rate = <0>;
 			bias-pull-up;
 		};
 	};
@@ -577,11 +599,13 @@
 				 <PIN_PD6__SDMMC2_DAT1>,
 				 <PIN_PD7__SDMMC2_DAT2>,
 				 <PIN_PD8__SDMMC2_DAT3>;
+			slew-rate = <0>;
 			bias-pull-up;
 		};
 
 		ck {
 			pinmux = <PIN_PD4__SDMMC2_CK>;
+			slew-rate = <0>;
 			bias-pull-up;
 		};
 	};

arch/arm/mach-at91/pm_suspend.S

@@ -1014,31 +1014,55 @@ ENTRY(at91_pm_suspend_in_sram)
 	mov	tmp1, #0
 	mcr	p15, 0, tmp1, c7, c10, 4
 
+	/* Flush tlb. */
+	mov	r4, #0
+	mcr	p15, 0, r4, c8, c7, 0
+
+	ldr	tmp1, [r0, #PM_DATA_PMC_MCKR_OFFSET]
+	str	tmp1, .mckr_offset
+	ldr	tmp1, [r0, #PM_DATA_PMC_VERSION]
+	str	tmp1, .pmc_version
+	ldr	tmp1, [r0, #PM_DATA_MEMCTRL]
+	str	tmp1, .memtype
+	ldr	tmp1, [r0, #PM_DATA_MODE]
+	str	tmp1, .pm_mode
+
+	/*
+	 * ldrne below are here to preload their address in the TLB as access
+	 * to RAM may be limited while in self-refresh.
+	 */
 	ldr	tmp1, [r0, #PM_DATA_PMC]
 	str	tmp1, .pmc_base
+	cmp	tmp1, #0
+	ldrne	tmp2, [tmp1, #0]
+
 	ldr	tmp1, [r0, #PM_DATA_RAMC0]
 	str	tmp1, .sramc_base
+	cmp	tmp1, #0
+	ldrne	tmp2, [tmp1, #0]
+
 	ldr	tmp1, [r0, #PM_DATA_RAMC1]
 	str	tmp1, .sramc1_base
+	cmp	tmp1, #0
+	ldrne	tmp2, [tmp1, #0]
+
+#ifndef CONFIG_SOC_SAM_V4_V5
+	/* ldrne below are here to preload their address in the TLB */
 	ldr	tmp1, [r0, #PM_DATA_RAMC_PHY]
 	str	tmp1, .sramc_phy_base
-	ldr	tmp1, [r0, #PM_DATA_MEMCTRL]
-	str	tmp1, .memtype
-	ldr	tmp1, [r0, #PM_DATA_MODE]
-	str	tmp1, .pm_mode
-	ldr	tmp1, [r0, #PM_DATA_PMC_MCKR_OFFSET]
-	str	tmp1, .mckr_offset
-	ldr	tmp1, [r0, #PM_DATA_PMC_VERSION]
-	str	tmp1, .pmc_version
-	/* Both ldrne below are here to preload their address in the TLB */
+	cmp	tmp1, #0
+	ldrne	tmp2, [tmp1, #0]
+
 	ldr	tmp1, [r0, #PM_DATA_SHDWC]
 	str	tmp1, .shdwc
 	cmp	tmp1, #0
 	ldrne	tmp2, [tmp1, #0]
+
 	ldr	tmp1, [r0, #PM_DATA_SFRBU]
 	str	tmp1, .sfrbu
 	cmp	tmp1, #0
 	ldrne	tmp2, [tmp1, #0x10]
+#endif
 
 	/* Active the self-refresh mode */
 	at91_sramc_self_refresh_ena