PCI: xgene: Use inbound resources for setup

Now that the helpers provide the inbound resources in the host bridge
'dma_ranges' resource list, convert the Xgene host bridge to use the
resource list to setup the inbound addresses.

Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Reviewed-by: Andrew Murray <[email protected]>
Cc: Toan Le <[email protected]>
Cc: Lorenzo Pieralisi <[email protected]>
Cc: Bjorn Helgaas <[email protected]>

Author: robherring

drivers/pci/controller/pci-xgene.c

@@ -481,27 +481,28 @@ static int xgene_pcie_select_ib_reg(u8 *ib_reg_mask, u64 size)
 }
 
 static void xgene_pcie_setup_ib_reg(struct xgene_pcie_port *port,
-				    struct of_pci_range *range, u8 *ib_reg_mask)
+				    struct resource_entry *entry,
+				    u8 *ib_reg_mask)
 {
 	void __iomem *cfg_base = port->cfg_base;
 	struct device *dev = port->dev;
 	void *bar_addr;
 	u32 pim_reg;
-	u64 cpu_addr = range->cpu_addr;
-	u64 pci_addr = range->pci_addr;
-	u64 size = range->size;
+	u64 cpu_addr = entry->res->start;
+	u64 pci_addr = cpu_addr - entry->offset;
+	u64 size = resource_size(entry->res);
 	u64 mask = ~(size - 1) | EN_REG;
 	u32 flags = PCI_BASE_ADDRESS_MEM_TYPE_64;
 	u32 bar_low;
 	int region;
 
-	region = xgene_pcie_select_ib_reg(ib_reg_mask, range->size);
+	region = xgene_pcie_select_ib_reg(ib_reg_mask, size);
 	if (region < 0) {
 		dev_warn(dev, "invalid pcie dma-range config\n");
 		return;
 	}
 
-	if (range->flags & IORESOURCE_PREFETCH)
+	if (entry->res->flags & IORESOURCE_PREFETCH)
 		flags |= PCI_BASE_ADDRESS_MEM_PREFETCH;
 
 	bar_low = pcie_bar_low_val((u32)cpu_addr, flags);
@@ -532,25 +533,13 @@ static void xgene_pcie_setup_ib_reg(struct xgene_pcie_port *port,
 
 static int xgene_pcie_parse_map_dma_ranges(struct xgene_pcie_port *port)
 {
-	struct device_node *np = port->node;
-	struct of_pci_range range;
-	struct of_pci_range_parser parser;
-	struct device *dev = port->dev;
+	struct pci_host_bridge *bridge = pci_host_bridge_from_priv(port);
+	struct resource_entry *entry;
 	u8 ib_reg_mask = 0;
 
-	if (of_pci_dma_range_parser_init(&parser, np)) {
-		dev_err(dev, "missing dma-ranges property\n");
-		return -EINVAL;
-	}
-
-	/* Get the dma-ranges from DT */
-	for_each_of_pci_range(&parser, &range) {
-		u64 end = range.cpu_addr + range.size - 1;
+	resource_list_for_each_entry(entry, &bridge->dma_ranges)
+		xgene_pcie_setup_ib_reg(port, entry, &ib_reg_mask);
 
-		dev_dbg(dev, "0x%08x 0x%016llx..0x%016llx -> 0x%016llx\n",
-			range.flags, range.cpu_addr, end, range.pci_addr);
-		xgene_pcie_setup_ib_reg(port, &range, &ib_reg_mask);
-	}
 	return 0;
 }