Revpi 711/mac addr support #20
Merged
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Read the mac address from device tree if the property "local-mac-address" is specified. In this case skip reading the MAC from the dongle. Signed-off-by: Lino Sanfilippo <[email protected]>
Provide the "local-mac-address" property for the wireless lan interface so that it can be set by the bootloader. Signed-off-by: Lino Sanfilippo <[email protected]>
iluminat23
approved these changes
Mar 2, 2021
iluminat23
pushed a commit
that referenced
this pull request
Jan 20, 2022
[ Upstream commit 39fbef4 ] The following kernel crash can be triggered: [ 89.266592] ------------[ cut here ]------------ [ 89.267427] kernel BUG at fs/buffer.c:3020! [ 89.268264] invalid opcode: 0000 [#1] SMP KASAN PTI [ 89.269116] CPU: 7 PID: 1750 Comm: kmmpd-loop0 Not tainted 5.10.0-862.14.0.6.x86_64-08610-gc932cda3cef4-dirty #20 [ 89.273169] RIP: 0010:submit_bh_wbc.isra.0+0x538/0x6d0 [ 89.277157] RSP: 0018:ffff888105ddfd08 EFLAGS: 00010246 [ 89.278093] RAX: 0000000000000005 RBX: ffff888124231498 RCX: ffffffffb2772612 [ 89.279332] RDX: 1ffff11024846293 RSI: 0000000000000008 RDI: ffff888124231498 [ 89.280591] RBP: ffff8881248cc000 R08: 0000000000000001 R09: ffffed1024846294 [ 89.281851] R10: ffff88812423149f R11: ffffed1024846293 R12: 0000000000003800 [ 89.283095] R13: 0000000000000001 R14: 0000000000000000 R15: ffff8881161f7000 [ 89.284342] FS: 0000000000000000(0000) GS:ffff88839b5c0000(0000) knlGS:0000000000000000 [ 89.285711] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 89.286701] CR2: 00007f166ebc01a0 CR3: 0000000435c0e000 CR4: 00000000000006e0 [ 89.287919] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 89.289138] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 89.290368] Call Trace: [ 89.290842] write_mmp_block+0x2ca/0x510 [ 89.292218] kmmpd+0x433/0x9a0 [ 89.294902] kthread+0x2dd/0x3e0 [ 89.296268] ret_from_fork+0x22/0x30 [ 89.296906] Modules linked in: by running the following commands: 1. mkfs.ext4 -O mmp /dev/sda -b 1024 2. mount /dev/sda /home/test 3. echo "/dev/sda" > /sys/power/resume That happens because swsusp_check() calls set_blocksize() on the target partition which confuses the file system: Thread1 Thread2 mount /dev/sda /home/test get s_mmp_bh --> has mapped flag start kmmpd thread echo "/dev/sda" > /sys/power/resume resume_store software_resume swsusp_check set_blocksize truncate_inode_pages_range truncate_cleanup_page block_invalidatepage discard_buffer --> clean mapped flag write_mmp_block submit_bh submit_bh_wbc BUG_ON(!buffer_mapped(bh)) To address this issue, modify swsusp_check() to open the target block device with exclusive access. Signed-off-by: Ye Bin <[email protected]> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
linosanfilippo-kunbus
pushed a commit
that referenced
this pull request
Aug 21, 2023
[ Upstream commit ff59808 ] The pointer to mdev_bus_compat_class is statically defined at the top of mdev_core, and was originally (commit 7b96953 ("vfio: Mediated device Core driver") serialized by the parent_list_lock. The blamed commit removed this mutex, leaving the pointer initialization unserialized. As a result, the creation of multiple MDEVs in parallel (such as during boot) can encounter errors during the creation of the sysfs entries, such as: [ 8.337509] sysfs: cannot create duplicate filename '/class/mdev_bus' [ 8.337514] vfio_ccw 0.0.01d8: MDEV: Registered [ 8.337516] CPU: 13 PID: 946 Comm: driverctl Not tainted 6.4.0-rc7 #20 [ 8.337522] Hardware name: IBM 3906 M05 780 (LPAR) [ 8.337525] Call Trace: [ 8.337528] [<0000000162b0145a>] dump_stack_lvl+0x62/0x80 [ 8.337540] [<00000001622aeb30>] sysfs_warn_dup+0x78/0x88 [ 8.337549] [<00000001622aeca6>] sysfs_create_dir_ns+0xe6/0xf8 [ 8.337552] [<0000000162b04504>] kobject_add_internal+0xf4/0x340 [ 8.337557] [<0000000162b04d48>] kobject_add+0x78/0xd0 [ 8.337561] [<0000000162b04e0a>] kobject_create_and_add+0x6a/0xb8 [ 8.337565] [<00000001627a110e>] class_compat_register+0x5e/0x90 [ 8.337572] [<000003ff7fd815da>] mdev_register_parent+0x102/0x130 [mdev] [ 8.337581] [<000003ff7fdc7f2c>] vfio_ccw_sch_probe+0xe4/0x178 [vfio_ccw] [ 8.337588] [<0000000162a7833c>] css_probe+0x44/0x80 [ 8.337599] [<000000016279f4da>] really_probe+0xd2/0x460 [ 8.337603] [<000000016279fa08>] driver_probe_device+0x40/0xf0 [ 8.337606] [<000000016279fb78>] __device_attach_driver+0xc0/0x140 [ 8.337610] [<000000016279cbe0>] bus_for_each_drv+0x90/0xd8 [ 8.337618] [<00000001627a00b0>] __device_attach+0x110/0x190 [ 8.337621] [<000000016279c7c8>] bus_rescan_devices_helper+0x60/0xb0 [ 8.337626] [<000000016279cd48>] drivers_probe_store+0x48/0x80 [ 8.337632] [<00000001622ac9b0>] kernfs_fop_write_iter+0x138/0x1f0 [ 8.337635] [<00000001621e5e14>] vfs_write+0x1ac/0x2f8 [ 8.337645] [<00000001621e61d8>] ksys_write+0x70/0x100 [ 8.337650] [<0000000162b2bdc4>] __do_syscall+0x1d4/0x200 [ 8.337656] [<0000000162b3c828>] system_call+0x70/0x98 [ 8.337664] kobject: kobject_add_internal failed for mdev_bus with -EEXIST, don't try to register things with the same name in the same directory. [ 8.337668] kobject: kobject_create_and_add: kobject_add error: -17 [ 8.337674] vfio_ccw: probe of 0.0.01d9 failed with error -12 [ 8.342941] vfio_ccw_mdev aeb9ca91-10c6-42bc-a168-320023570aea: Adding to iommu group 2 Move the initialization of the mdev_bus_compat_class pointer to the init path, to match the cleanup in module exit. This way the code in mdev_register_parent() can simply link the new parent to it, rather than determining whether initialization is required first. Fixes: 89345d5 ("vfio/mdev: embedd struct mdev_parent in the parent data structure") Reported-by: Alexander Egorenkov <[email protected]> Signed-off-by: Eric Farman <[email protected]> Reviewed-by: Kevin Tian <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Tony Krowiak <[email protected]> Reviewed-by: Jason Gunthorpe <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alex Williamson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.