update version to 0.15.0

.github/workflows/build_arm.yml

@@ -171,7 +171,7 @@ jobs:
   # - pico-probe is /dev/ttyACM0
   # ---------------------------------------
   hw-rp2040-test:
-    # Limit the run to only hathach due to limited resource on RPI4
+    # run only with hathach's commit due to limited resource on RPI4
     if: github.repository_owner == 'hathach'
     needs: build-arm
     runs-on: [self-hosted, Linux, ARM64, rp2040]
@@ -190,30 +190,31 @@ jobs:
 
     - name: Create flash.sh
       run: |
-        echo > flash.sh 'cmdout=$(openocd -f "interface/picoprobe.cfg" -f "target/rp2040.cfg" -c "program $1 reset exit")'
+        #echo > flash.sh 'cmdout=$(openocd -f "interface/picoprobe.cfg" -f "target/rp2040.cfg" -c "program $1 reset exit")'
+        echo > flash.sh 'pyocd flash -t rp2040 $1'
         echo >> flash.sh 'if (( $? )) ; then echo $cmdout ; fi'
         chmod +x flash.sh
 
     - name: Test cdc_dual_ports
       run: |
         ./flash.sh cdc_dual_ports.elf
-        while (! ([ -e /dev/ttyACM1 ] && [ -e /dev/ttyACM2 ])) && [ $SECONDS -le 5 ]; do :; done
+        while (! ([ -e /dev/ttyACM1 ] && [ -e /dev/ttyACM2 ])) && [ $SECONDS -le 10 ]; do :; done
         test -e /dev/ttyACM1 && echo "ttyACM1 exists"
         test -e /dev/ttyACM2 && echo "ttyACM2 exists"
 
     - name: Test cdc_msc
       run: |
         ./flash.sh cdc_msc.elf
         readme='/media/pi/TinyUSB MSC/README.TXT'
-        while (! ([ -e /dev/ttyACM1 ] && [ -f "$readme" ])) && [ $SECONDS -le 5 ]; do :; done
+        while (! ([ -e /dev/ttyACM1 ] && [ -f "$readme" ])) && [ $SECONDS -le 10 ]; do :; done
         test -e /dev/ttyACM1 && echo "ttyACM1 exists"
         test -f "$readme" && echo "$readme exists"
         cat "$readme"
 
     - name: Test dfu
       run: |
         ./flash.sh dfu.elf
-        while (! (dfu-util -l | grep "Found DFU")) && [ $SECONDS -le 5 ]; do :; done
+        while (! (dfu-util -l | grep "Found DFU")) && [ $SECONDS -le 10 ]; do :; done
         dfu-util -d cafe -a 0 -U dfu0
         dfu-util -d cafe -a 1 -U dfu1
         grep "TinyUSB DFU! - Partition 0" dfu0
@@ -222,7 +223,7 @@ jobs:
     - name: Test dfu_runtime
       run: |
         ./flash.sh dfu_runtime.elf
-        while (! (dfu-util -l | grep "Found Runtime")) && [ $SECONDS -le 5 ]; do :; done
+        while (! (dfu-util -l | grep "Found Runtime")) && [ $SECONDS -le 10 ]; do :; done
 
   # ---------------------------------------
   # Hardware in the loop (HIL)
@@ -260,7 +261,7 @@ jobs:
     - name: Test cdc_dual_ports
       run: |
         ./flash.sh cdc_dual_ports.elf
-        while (! ([ -e /dev/ttyACM1 ] && [ -e /dev/ttyACM2 ])) && [ $SECONDS -le 5 ]; do :; done
+        while (! ([ -e /dev/ttyACM1 ] && [ -e /dev/ttyACM2 ])) && [ $SECONDS -le 10 ]; do :; done
         test -e /dev/ttyACM1 && echo "ttyACM1 exists"
         test -e /dev/ttyACM2 && echo "ttyACM2 exists"
 
@@ -270,15 +271,15 @@ jobs:
       run: |
         ./flash.sh cdc_msc.elf
         readme='/media/pi/TinyUSB MSC/README.TXT'
-        while (! ([ -e /dev/ttyACM1 ] && [ -f "$readme" ])) && [ $SECONDS -le 5 ]; do :; done
+        while (! ([ -e /dev/ttyACM1 ] && [ -f "$readme" ])) && [ $SECONDS -le 10 ]; do :; done
         test -e /dev/ttyACM1 && echo "ttyACM1 exists"
         test -f "$readme" && echo "$readme exists"
         cat "$readme"
 
     - name: Test dfu
       run: |
         ./flash.sh dfu.elf
-        while (! (dfu-util -l | grep "Found DFU")) && [ $SECONDS -le 5 ]; do :; done
+        while (! (dfu-util -l | grep "Found DFU")) && [ $SECONDS -le 10 ]; do :; done
         dfu-util -d cafe -a 0 -U dfu0
         dfu-util -d cafe -a 1 -U dfu1
         grep "TinyUSB DFU! - Partition 0" dfu0
@@ -287,4 +288,4 @@ jobs:
     - name: Test dfu_runtime
       run: |
         ./flash.sh dfu_runtime.elf
-        while (! (dfu-util -l | grep "Found Runtime")) && [ $SECONDS -le 5 ]; do :; done  
+        while (! (dfu-util -l | grep "Found Runtime")) && [ $SECONDS -le 10 ]; do :; done  

docs/info/changelog.rst

@@ -2,32 +2,108 @@
 Changelog
 *********
 
+0.15.0
+======
+
+- Add codespell to detect typo
+- Add support for fuzzing and bagde for oss-fuzz
+- [osal]
+
+  - Allow the use of non-static allocation for FreeRTOS
+  - Fix FreeRTOS wrong task switch in some cases
+
+- Fix tu_fifo memory overflown when repeatedly write to overwritable fifo (accumulated more than 2 depths)
+- Better support for IAR (ARM) with ci build check for stm32 mcus.
+- Fix Windows build for some mingw gnu make situations
+
+Controller Driver (DCD & HCD)
+-----------------------------
+
+- Add new port support (WIP) for WCH CH32V307 USB Highspeed
+- Add new port support (WIP) for PIC32MM/MX & PIC24
+
+- [nRF]
+
+  - Fix endpoint internal state when closed
+  - Fix reception of large ISO packets
+
+- [rp2040] 
+
+  - [dcd] Implement workaround for Errata 15. This enable SOF when bulk-in endpoint is in use and reduce its bandwidth to only 80%
+  - [hcd] Fix shared irq slots filling up when hcd_init() is called multiple times
+  - [hcd] Support host bulk endpoint using hw "interrupt" endpoint. Note speed limit is 64KB/s
+
+- [samd][dcd] Add support for ISO endpoint
+- [dwc2][dcd] Add support for stm32u5xx
+- [esp32sx] Fix Isochronous transfers only transmitted on even frame
+- [lpc_ip3511][dcd] Add isochronous support and fix endpoint accidental write
+- [ft90x] Improve and enhance support for FT9xx MCU, tested with more examples
+
+Device Stack
+------------
+
+- [Video]
+
+  - Add support for MJPEG
+  - Fix probe on macOS
+
+- [MIDI]
+
+  - Support port name strings
+  - fix MS Header wTotalLength computation
+
+- [HID]
+
+  - Add FIDO descriptor template
+  - change length in tud_hid_report_complete_cb() from uint8 to uint16
+
+- [CDC]
+
+  - Fix autoflush for FIFO < MPS
+  - Fix tx fifo memory overflown when DTR is not set and tud_cdc_write() is called repeatedly with large enough data  
+
+- [USBTMC] Fix packet size with highspeed
+
+Host Stack
+----------
+
+- Retry a few times with transfers in enumeration since device can be unstable when starting up
+- [MSC] Rework host masstorage API. Add new **host/msc_file_explorer** example
+- [CDC]
+
+  - Add support for host cdc
+  - Fix host cdc with device without IAD e.g Arduino Due
+
 0.14.0
 ======
 
 - Improve compiler support for CCRX and IAR
 - Add timeout to osal_queue_receive()
 - Add tud_task_ext(timeout, in_isr) as generic version of tud_task(). Same as tuh_task_ext(), tuh_task()
 - Enable more warnings -Wnull-dereference -Wuninitialized -Wunused -Wredundant-decls -Wconversion
-- Add new examples 
+- Add new examples
+
   - host/bare_api to demonstrate generic (app-level) enumeration and endpoint transfer
   - dual/host_hid_to_device_cdc to run both device and host stack concurrently, get HID report from host and print out to device CDC. This example only work with multiple-controller MCUs and rp2040 with the help of pio-usb as added controller.
 
 Controller Driver (DCD & HCD)
 -----------------------------
 
 - Enhance rhports management to better support dual roles
+
   - CFG_TUD_ENABLED/CFG_TUH_ENABLED, CFG_TUD_MAX_SPEED/CFG_TUH_MAX_SPEED can be used to replace CFG_TUSB_RHPORT0_MODE/CFG_TUSB_RHPORT1_MODE
   - tud_init(rphort), tuh_init(rhport) can be used to init stack on specified roothub port (controller) instead of tusb_init(void)
 - Add dcd/hcd port specific defines TUP_ (stand for tinyusb port-specific)
 - [dwc2]
+
   - Update to support stm32 h72x, h73x with only 1 otg controller
   - Fix overwrite with grstctl when disable endpoint
 - [EHCI] Fix an issue with EHCI driver
 - [msp430] Fix for possible bug in msp430-elf-gcc 9.3.0
 - [nrf5x] Fix DMA access race condition using atomic function 
 - [pic32] Fix PIC32 santiy
 - [rp2040]
+
   - Add PICO-PIO-USB as controller (device/host) support for rp2040
   - Use shared IRQ handlers, so user can also hook the USB IRQ
   - Fix resumed signal not reported to device stack
@@ -37,10 +113,12 @@ Device Stack
 ------------
 
 - [Audio] Add support for feedback endpoint computation
+
   - New API tud_audio_feedback_params_cb(), tud_audio_feedback_interval_isr().
   - Supported computation method are: frequency with fixed/float or power of 2. Feedback with fifo count is not yet supported.
   - Fix nitfs (should be 3) in TUD_AUDIO_HEADSET_STEREO_DESCRIPTOR
   - Fix typo in audiod_rx_done_cb()
+
 - [DFU] Fix coexistence with other interfaces BTH, RNDIS
 - [MSC] Fix inquiry response additional length field
 - [Venndor] Improve write performance
@@ -52,9 +130,11 @@ Host Stack
 - [HID] Open OUT endpoint if available
 - [Hub] hub clear port and device interrupts
 - [USBH] Major improvement
+
   - Rework usbh control transfer with complete callback. New API tuh_control_xfer() though still only carry 1 usbh (no queueing) at a time.
   - Add generic endpoint transfer with tuh_edpt_open(), tuh_edpt_xfer(). Require `CFG_TUH_API_EDPT_XFER=1`
   - Support app-level enumeration with new APIs
+
     - tuh_descriptor_get(), tuh_descriptor_get_device(), tuh_descriptor_get_configuration(), tuh_descriptor_get_hid_report()
     - tuh_descriptor_get_string(), tuh_descriptor_get_manufacturer_string(), tuh_descriptor_get_product_string(), tuh_descriptor_get_serial_string()
     - Also add _sync() as sync/blocking version for above APIs

repository.yml

@@ -12,7 +12,6 @@ repo.versions:
     "0.12.0": "0.12.0"
     "0.13.0": "0.13.0"
     "0.14.0": "0.14.0"
-
-    "0-dev": "0.0.0"        # master
-    "0-latest": "0.14.0"    # latest stable release
-
+    "0.15.0": "0.15.0"
+    "0-latest": "0.15.0"
+    "0-dev": "0.0.0"

src/tusb_option.h

@@ -30,7 +30,7 @@
 #include "common/tusb_compiler.h"
 
 #define TUSB_VERSION_MAJOR     0
-#define TUSB_VERSION_MINOR     14
+#define TUSB_VERSION_MINOR     15
 #define TUSB_VERSION_REVISION  0
 #define TUSB_VERSION_STRING    TU_STRING(TUSB_VERSION_MAJOR) "." TU_STRING(TUSB_VERSION_MINOR) "." TU_STRING(TUSB_VERSION_REVISION)
 

tools/make_release.py

@@ -0,0 +1,40 @@
+import re
+
+version = '0.15.0'
+
+print('version {}'.format(version))
+ver_id = version.split('.')
+
+###################
+# src/tusb_option.h
+###################
+f_option_h = 'src/tusb_option.h'
+
+with open(f_option_h) as f:
+    fdata = f.read()
+
+fdata = re.sub(r'(#define TUSB_VERSION_MAJOR *) \d+', r"\1 {}".format(ver_id[0]), fdata)
+fdata = re.sub(r'(#define TUSB_VERSION_MINOR *) \d+', r"\1 {}".format(ver_id[1]), fdata)
+fdata = re.sub(r'(#define TUSB_VERSION_REVISION *) \d+', r"\1 {}".format(ver_id[2]), fdata)
+
+# Write the file out again
+with open(f_option_h, 'w') as f:
+    f.write(fdata)
+
+###################
+# repository.yml
+###################
+f_repository_yml = 'repository.yml'
+with open(f_repository_yml) as f:
+    fdata = f.read()
+
+if fdata.find(version) < 0:
+    fdata = re.sub(r'("0-latest"): "\d+\.\d+\.\d+"', r'"{}": "{}"\r\n    \1: "{}"'.format(version, version, version), fdata)
+    with open(f_repository_yml, 'w') as f:
+        f.write(fdata)
+
+###################
+# docs/info/changelog.rst
+###################
+
+print("Update docs/info/changelog.rst")