|
| 1 | +// SPDX-License-Identifier: GPL-2.0-only |
| 2 | +// |
| 3 | +// rt5682.c -- RT5682 ALSA SoC audio component driver |
| 4 | +// |
| 5 | +// Copyright 2018 Realtek Semiconductor Corp. |
| 6 | +// Author: Bard Liao <[email protected]> |
| 7 | +// |
| 8 | + |
| 9 | +#include <linux/module.h> |
| 10 | +#include <linux/moduleparam.h> |
| 11 | +#include <linux/init.h> |
| 12 | +#include <linux/delay.h> |
| 13 | +#include <linux/pm.h> |
| 14 | +#include <linux/pm_runtime.h> |
| 15 | +#include <linux/i2c.h> |
| 16 | +#include <linux/platform_device.h> |
| 17 | +#include <linux/spi/spi.h> |
| 18 | +#include <linux/acpi.h> |
| 19 | +#include <linux/gpio.h> |
| 20 | +#include <linux/of_gpio.h> |
| 21 | +#include <linux/mutex.h> |
| 22 | +#include <sound/core.h> |
| 23 | +#include <sound/pcm.h> |
| 24 | +#include <sound/pcm_params.h> |
| 25 | +#include <sound/jack.h> |
| 26 | +#include <sound/soc.h> |
| 27 | +#include <sound/soc-dapm.h> |
| 28 | +#include <sound/initval.h> |
| 29 | +#include <sound/tlv.h> |
| 30 | +#include <sound/rt5682.h> |
| 31 | + |
| 32 | +#include "rl6231.h" |
| 33 | +#include "rt5682.h" |
| 34 | + |
| 35 | +static const struct rt5682_platform_data i2s_default_platform_data = { |
| 36 | + .dmic1_data_pin = RT5682_DMIC1_DATA_GPIO2, |
| 37 | + .dmic1_clk_pin = RT5682_DMIC1_CLK_GPIO3, |
| 38 | + .jd_src = RT5682_JD1, |
| 39 | + .btndet_delay = 16, |
| 40 | + .dai_clk_names[RT5682_DAI_WCLK_IDX] = "rt5682-dai-wclk", |
| 41 | + .dai_clk_names[RT5682_DAI_BCLK_IDX] = "rt5682-dai-bclk", |
| 42 | +}; |
| 43 | + |
| 44 | +static const struct regmap_config rt5682_regmap = { |
| 45 | + .reg_bits = 16, |
| 46 | + .val_bits = 16, |
| 47 | + .max_register = RT5682_I2C_MODE, |
| 48 | + .volatile_reg = rt5682_volatile_register, |
| 49 | + .readable_reg = rt5682_readable_register, |
| 50 | + .cache_type = REGCACHE_RBTREE, |
| 51 | + .reg_defaults = rt5682_reg, |
| 52 | + .num_reg_defaults = RT5682_REG_NUM, |
| 53 | + .use_single_read = true, |
| 54 | + .use_single_write = true, |
| 55 | +}; |
| 56 | + |
| 57 | +static void rt5682_jd_check_handler(struct work_struct *work) |
| 58 | +{ |
| 59 | + struct rt5682_priv *rt5682 = container_of(work, struct rt5682_priv, |
| 60 | + jd_check_work.work); |
| 61 | + |
| 62 | + if (snd_soc_component_read32(rt5682->component, RT5682_AJD1_CTRL) |
| 63 | + & RT5682_JDH_RS_MASK) { |
| 64 | + /* jack out */ |
| 65 | + rt5682->jack_type = rt5682_headset_detect(rt5682->component, 0); |
| 66 | + |
| 67 | + snd_soc_jack_report(rt5682->hs_jack, rt5682->jack_type, |
| 68 | + SND_JACK_HEADSET | |
| 69 | + SND_JACK_BTN_0 | SND_JACK_BTN_1 | |
| 70 | + SND_JACK_BTN_2 | SND_JACK_BTN_3); |
| 71 | + } else { |
| 72 | + schedule_delayed_work(&rt5682->jd_check_work, 500); |
| 73 | + } |
| 74 | +} |
| 75 | + |
| 76 | +static irqreturn_t rt5682_irq(int irq, void *data) |
| 77 | +{ |
| 78 | + struct rt5682_priv *rt5682 = data; |
| 79 | + |
| 80 | + mod_delayed_work(system_power_efficient_wq, |
| 81 | + &rt5682->jack_detect_work, msecs_to_jiffies(250)); |
| 82 | + |
| 83 | + return IRQ_HANDLED; |
| 84 | +} |
| 85 | + |
| 86 | +static struct snd_soc_dai_driver rt5682_dai[] = { |
| 87 | + { |
| 88 | + .name = "rt5682-aif1", |
| 89 | + .id = RT5682_AIF1, |
| 90 | + .playback = { |
| 91 | + .stream_name = "AIF1 Playback", |
| 92 | + .channels_min = 1, |
| 93 | + .channels_max = 2, |
| 94 | + .rates = RT5682_STEREO_RATES, |
| 95 | + .formats = RT5682_FORMATS, |
| 96 | + }, |
| 97 | + .capture = { |
| 98 | + .stream_name = "AIF1 Capture", |
| 99 | + .channels_min = 1, |
| 100 | + .channels_max = 2, |
| 101 | + .rates = RT5682_STEREO_RATES, |
| 102 | + .formats = RT5682_FORMATS, |
| 103 | + }, |
| 104 | + .ops = &rt5682_aif1_dai_ops, |
| 105 | + }, |
| 106 | + { |
| 107 | + .name = "rt5682-aif2", |
| 108 | + .id = RT5682_AIF2, |
| 109 | + .capture = { |
| 110 | + .stream_name = "AIF2 Capture", |
| 111 | + .channels_min = 1, |
| 112 | + .channels_max = 2, |
| 113 | + .rates = RT5682_STEREO_RATES, |
| 114 | + .formats = RT5682_FORMATS, |
| 115 | + }, |
| 116 | + .ops = &rt5682_aif2_dai_ops, |
| 117 | + }, |
| 118 | +}; |
| 119 | + |
| 120 | +static int rt5682_i2c_probe(struct i2c_client *i2c, |
| 121 | + const struct i2c_device_id *id) |
| 122 | +{ |
| 123 | + struct rt5682_platform_data *pdata = dev_get_platdata(&i2c->dev); |
| 124 | + struct rt5682_priv *rt5682; |
| 125 | + int i, ret; |
| 126 | + unsigned int val; |
| 127 | + |
| 128 | + rt5682 = devm_kzalloc(&i2c->dev, sizeof(struct rt5682_priv), |
| 129 | + GFP_KERNEL); |
| 130 | + if (!rt5682) |
| 131 | + return -ENOMEM; |
| 132 | + |
| 133 | + i2c_set_clientdata(i2c, rt5682); |
| 134 | + |
| 135 | + rt5682->pdata = i2s_default_platform_data; |
| 136 | + |
| 137 | + if (pdata) |
| 138 | + rt5682->pdata = *pdata; |
| 139 | + else |
| 140 | + rt5682_parse_dt(rt5682, &i2c->dev); |
| 141 | + |
| 142 | + rt5682->regmap = devm_regmap_init_i2c(i2c, &rt5682_regmap); |
| 143 | + if (IS_ERR(rt5682->regmap)) { |
| 144 | + ret = PTR_ERR(rt5682->regmap); |
| 145 | + dev_err(&i2c->dev, "Failed to allocate register map: %d\n", |
| 146 | + ret); |
| 147 | + return ret; |
| 148 | + } |
| 149 | + |
| 150 | + for (i = 0; i < ARRAY_SIZE(rt5682->supplies); i++) |
| 151 | + rt5682->supplies[i].supply = rt5682_supply_names[i]; |
| 152 | + |
| 153 | + ret = devm_regulator_bulk_get(&i2c->dev, ARRAY_SIZE(rt5682->supplies), |
| 154 | + rt5682->supplies); |
| 155 | + if (ret) { |
| 156 | + dev_err(&i2c->dev, "Failed to request supplies: %d\n", ret); |
| 157 | + return ret; |
| 158 | + } |
| 159 | + |
| 160 | + ret = regulator_bulk_enable(ARRAY_SIZE(rt5682->supplies), |
| 161 | + rt5682->supplies); |
| 162 | + if (ret) { |
| 163 | + dev_err(&i2c->dev, "Failed to enable supplies: %d\n", ret); |
| 164 | + return ret; |
| 165 | + } |
| 166 | + |
| 167 | + if (gpio_is_valid(rt5682->pdata.ldo1_en)) { |
| 168 | + if (devm_gpio_request_one(&i2c->dev, rt5682->pdata.ldo1_en, |
| 169 | + GPIOF_OUT_INIT_HIGH, "rt5682")) |
| 170 | + dev_err(&i2c->dev, "Fail gpio_request gpio_ldo\n"); |
| 171 | + } |
| 172 | + |
| 173 | + /* Sleep for 300 ms miniumum */ |
| 174 | + usleep_range(300000, 350000); |
| 175 | + |
| 176 | + regmap_write(rt5682->regmap, RT5682_I2C_MODE, 0x1); |
| 177 | + usleep_range(10000, 15000); |
| 178 | + |
| 179 | + regmap_read(rt5682->regmap, RT5682_DEVICE_ID, &val); |
| 180 | + if (val != DEVICE_ID) { |
| 181 | + dev_err(&i2c->dev, |
| 182 | + "Device with ID register %x is not rt5682\n", val); |
| 183 | + return -ENODEV; |
| 184 | + } |
| 185 | + |
| 186 | + mutex_init(&rt5682->calibrate_mutex); |
| 187 | + rt5682_calibrate(rt5682); |
| 188 | + |
| 189 | + rt5682_apply_patch_list(rt5682, &i2c->dev); |
| 190 | + |
| 191 | + regmap_write(rt5682->regmap, RT5682_DEPOP_1, 0x0000); |
| 192 | + |
| 193 | + /* DMIC pin*/ |
| 194 | + if (rt5682->pdata.dmic1_data_pin != RT5682_DMIC1_NULL) { |
| 195 | + switch (rt5682->pdata.dmic1_data_pin) { |
| 196 | + case RT5682_DMIC1_DATA_GPIO2: /* share with LRCK2 */ |
| 197 | + regmap_update_bits(rt5682->regmap, RT5682_DMIC_CTRL_1, |
| 198 | + RT5682_DMIC_1_DP_MASK, RT5682_DMIC_1_DP_GPIO2); |
| 199 | + regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1, |
| 200 | + RT5682_GP2_PIN_MASK, RT5682_GP2_PIN_DMIC_SDA); |
| 201 | + break; |
| 202 | + |
| 203 | + case RT5682_DMIC1_DATA_GPIO5: /* share with DACDAT1 */ |
| 204 | + regmap_update_bits(rt5682->regmap, RT5682_DMIC_CTRL_1, |
| 205 | + RT5682_DMIC_1_DP_MASK, RT5682_DMIC_1_DP_GPIO5); |
| 206 | + regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1, |
| 207 | + RT5682_GP5_PIN_MASK, RT5682_GP5_PIN_DMIC_SDA); |
| 208 | + break; |
| 209 | + |
| 210 | + default: |
| 211 | + dev_warn(&i2c->dev, "invalid DMIC_DAT pin\n"); |
| 212 | + break; |
| 213 | + } |
| 214 | + |
| 215 | + switch (rt5682->pdata.dmic1_clk_pin) { |
| 216 | + case RT5682_DMIC1_CLK_GPIO1: /* share with IRQ */ |
| 217 | + regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1, |
| 218 | + RT5682_GP1_PIN_MASK, RT5682_GP1_PIN_DMIC_CLK); |
| 219 | + break; |
| 220 | + |
| 221 | + case RT5682_DMIC1_CLK_GPIO3: /* share with BCLK2 */ |
| 222 | + regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1, |
| 223 | + RT5682_GP3_PIN_MASK, RT5682_GP3_PIN_DMIC_CLK); |
| 224 | + break; |
| 225 | + |
| 226 | + default: |
| 227 | + dev_warn(&i2c->dev, "invalid DMIC_CLK pin\n"); |
| 228 | + break; |
| 229 | + } |
| 230 | + } |
| 231 | + |
| 232 | + regmap_update_bits(rt5682->regmap, RT5682_PWR_ANLG_1, |
| 233 | + RT5682_LDO1_DVO_MASK | RT5682_HP_DRIVER_MASK, |
| 234 | + RT5682_LDO1_DVO_12 | RT5682_HP_DRIVER_5X); |
| 235 | + regmap_write(rt5682->regmap, RT5682_MICBIAS_2, 0x0380); |
| 236 | + regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1, |
| 237 | + RT5682_GP4_PIN_MASK | RT5682_GP5_PIN_MASK, |
| 238 | + RT5682_GP4_PIN_ADCDAT1 | RT5682_GP5_PIN_DACDAT1); |
| 239 | + regmap_write(rt5682->regmap, RT5682_TEST_MODE_CTRL_1, 0x0000); |
| 240 | + regmap_update_bits(rt5682->regmap, RT5682_BIAS_CUR_CTRL_8, |
| 241 | + RT5682_HPA_CP_BIAS_CTRL_MASK, RT5682_HPA_CP_BIAS_3UA); |
| 242 | + regmap_update_bits(rt5682->regmap, RT5682_CHARGE_PUMP_1, |
| 243 | + RT5682_CP_CLK_HP_MASK, RT5682_CP_CLK_HP_300KHZ); |
| 244 | + regmap_update_bits(rt5682->regmap, RT5682_HP_CHARGE_PUMP_1, |
| 245 | + RT5682_PM_HP_MASK, RT5682_PM_HP_HV); |
| 246 | + regmap_update_bits(rt5682->regmap, RT5682_DMIC_CTRL_1, |
| 247 | + RT5682_FIFO_CLK_DIV_MASK, RT5682_FIFO_CLK_DIV_2); |
| 248 | + |
| 249 | + INIT_DELAYED_WORK(&rt5682->jack_detect_work, |
| 250 | + rt5682_jack_detect_handler); |
| 251 | + INIT_DELAYED_WORK(&rt5682->jd_check_work, |
| 252 | + rt5682_jd_check_handler); |
| 253 | + |
| 254 | + if (i2c->irq) { |
| 255 | + ret = devm_request_threaded_irq(&i2c->dev, i2c->irq, NULL, |
| 256 | + rt5682_irq, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
| 257 | + | IRQF_ONESHOT, "rt5682", rt5682); |
| 258 | + if (ret) |
| 259 | + dev_err(&i2c->dev, "Failed to reguest IRQ: %d\n", ret); |
| 260 | + } |
| 261 | + |
| 262 | + return devm_snd_soc_register_component(&i2c->dev, |
| 263 | + &rt5682_soc_component_dev, |
| 264 | + rt5682_dai, ARRAY_SIZE(rt5682_dai)); |
| 265 | +} |
| 266 | + |
| 267 | +static void rt5682_i2c_shutdown(struct i2c_client *client) |
| 268 | +{ |
| 269 | + struct rt5682_priv *rt5682 = i2c_get_clientdata(client); |
| 270 | + |
| 271 | + rt5682_reset(rt5682); |
| 272 | +} |
| 273 | + |
| 274 | +static const struct of_device_id rt5682_of_match[] = { |
| 275 | + {.compatible = "realtek,rt5682i"}, |
| 276 | + {}, |
| 277 | +}; |
| 278 | +MODULE_DEVICE_TABLE(of, rt5682_of_match); |
| 279 | + |
| 280 | +static const struct acpi_device_id rt5682_acpi_match[] = { |
| 281 | + {"10EC5682", 0,}, |
| 282 | + {}, |
| 283 | +}; |
| 284 | +MODULE_DEVICE_TABLE(acpi, rt5682_acpi_match); |
| 285 | + |
| 286 | +static const struct i2c_device_id rt5682_i2c_id[] = { |
| 287 | + {"rt5682", 0}, |
| 288 | + {} |
| 289 | +}; |
| 290 | +MODULE_DEVICE_TABLE(i2c, rt5682_i2c_id); |
| 291 | + |
| 292 | +static struct i2c_driver rt5682_i2c_driver = { |
| 293 | + .driver = { |
| 294 | + .name = "rt5682", |
| 295 | + .of_match_table = rt5682_of_match, |
| 296 | + .acpi_match_table = rt5682_acpi_match, |
| 297 | + }, |
| 298 | + .probe = rt5682_i2c_probe, |
| 299 | + .shutdown = rt5682_i2c_shutdown, |
| 300 | + .id_table = rt5682_i2c_id, |
| 301 | +}; |
| 302 | +module_i2c_driver(rt5682_i2c_driver); |
| 303 | + |
| 304 | +MODULE_DESCRIPTION("ASoC RT5682 driver"); |
| 305 | +MODULE_AUTHOR( "Bard Liao <[email protected]>"); |
| 306 | +MODULE_LICENSE("GPL v2"); |
0 commit comments