linux-image-6.8.0-101041-tuxedo keyboard not working after resume from suspend #10
Comments
tuxedo-bot
pushed a commit
that referenced
this issue
Sep 5, 2024
A sysfs reader can race with a device reset or removal, attempting to
read device state when the device is not actually present. eg:
[exception RIP: qed_get_current_link+17]
#8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede]
#9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3
#10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4
#11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300
#12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c
#13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b
#14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3
#15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1
#16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f
#17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb
crash> struct net_device.state ffff9a9d21336000
state = 5,
state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100).
The device is not present, note lack of __LINK_STATE_PRESENT (0b10).
This is the same sort of panic as observed in commit 4224cfd
("net-sysfs: add check for netdevice being present to speed_show").
There are many other callers of __ethtool_get_link_ksettings() which
don't have a device presence check.
Move this check into ethtool to protect all callers.
Fixes: d519e17 ("net: export device speed and duplex via sysfs")
Fixes: 4224cfd ("net-sysfs: add check for netdevice being present to speed_show")
Signed-off-by: Jamie Bainbridge <[email protected]>
Link: https://patch.msgid.link/8bae218864beaa44ed01628140475b9bf641c5b0.1724393671.git.jamie.bainbridge@gmail.com
Signed-off-by: Jakub Kicinski <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Sep 5, 2024
BugLink: https://bugs.launchpad.net/bugs/1942215 When the Timer operation is called, there are no arguments, and acpi_ex_resolve_operands will be called with an out-of-bounds stack pointer as num_operands is 0. This does not usually cause any problems, as acpi_ex_resolve_operands will ignore the parameter when the operation requires no arguments, as is the case. However, when the code is compiled with UBSAN, it will trigger, leading to an oops with invalid opcode on Linux. Fix it by using a NULL parameter when num_operands is 0. [ 8.285428] invalid opcode: 0000 [#1] SMP NOPTI [ 8.286436] CPU: 18 PID: 1522 Comm: systemd-udevd Not tainted 5.15.0-10-generic #10 [ 8.287505] Hardware name: Intel Corporation S2600WFD/S2600WFD, BIOS SE5C620.86B.0D.01.0395.022720191340 02/27/2019 [ 8.288495] RIP: 0010:acpi_ds_exec_end_op+0x1be/0x7a6 [ 8.289658] Code: 7b 0a 48 89 da 44 89 45 d4 48 98 48 8d 34 c3 e8 f8 3c 01 00 44 8b 45 d4 85 c0 41 89 c6 75 22 eb 9e 44 89 c0 41 80 f8 0b 76 02 <0f> 0b 48 8b 04 c5 c0 c0 ca aa 48 89 df ff d0 0f 1f 00 41 89 c4 eb [ 8.291858] RSP: 0018:ffffc38561a3f6d0 EFLAGS: 00010286 [ 8.292888] RAX: 0000000000000000 RBX: ffffa0aa87c91800 RCX: 0000000000000040 [ 8.294056] RDX: ffffffffffffffff RSI: ffffffffaacabf40 RDI: 00000000000002cb [ 8.295839] RBP: ffffc38561a3f700 R08: 0000000000000000 R09: ffffa0aa9f5a1000 [ 8.296030] IPMI message handler: version 39.2 [ 8.297554] R10: ffffa0aa89cdec00 R11: 0000000000000003 R12: 0000000000000000 [ 8.297556] R13: ffffa0aa9f5a10a0 R14: 0000000000000000 R15: 0000000000000000 [ 8.297558] FS: 00007f68ba26b8c0(0000) GS:ffffa0d60ca80000(0000) knlGS:0000000000000000 [ 8.297560] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8.297561] CR2: 00007fdbb3b9eec8 CR3: 00000001176ba001 CR4: 00000000007706e0 [ 8.297563] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8.297564] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 8.297565] PKRU: 55555554 [ 8.297566] Call Trace: [ 8.297569] acpi_ps_parse_loop+0x587/0x660 [ 8.297574] acpi_ps_parse_aml+0x1af/0x552 [ 8.297578] acpi_ps_execute_method+0x208/0x2ca [ 8.297580] acpi_ns_evaluate+0x34e/0x4f0 [ 8.297583] acpi_evaluate_object+0x18e/0x3b4 [ 8.297587] acpi_evaluate_dsm+0xb3/0x120 [ 8.297593] ? acpi_evaluate_dsm+0xb3/0x120 [ 8.297596] nfit_intel_shutdown_status+0xed/0x1a0 [nfit] [ 8.297606] acpi_nfit_add_dimm+0x3cb/0x660 [nfit] [ 8.297614] acpi_nfit_register_dimms+0x141/0x460 [nfit] [ 8.297620] acpi_nfit_init+0x54f/0x620 [nfit] [ 8.327895] acpi_nfit_add+0x18c/0x1f0 [nfit] [ 8.329341] acpi_device_probe+0x49/0x170 [ 8.330815] really_probe+0x209/0x410 [ 8.330820] __driver_probe_device+0x109/0x180 [ 8.330823] driver_probe_device+0x23/0x90 [ 8.330825] __driver_attach+0xac/0x1b0 [ 8.330828] ? __device_attach_driver+0xe0/0xe0 [ 8.330831] bus_for_each_dev+0x7c/0xc0 [ 8.330834] driver_attach+0x1e/0x20 [ 8.330835] bus_add_driver+0x135/0x1f0 [ 8.330837] driver_register+0x95/0xf0 [ 8.330840] acpi_bus_register_driver+0x39/0x50 [ 8.344874] nfit_init+0x168/0x1000 [nfit] [ 8.344882] ? 0xffffffffc0735000 [ 8.344885] do_one_initcall+0x46/0x1d0 [ 8.350927] ? kmem_cache_alloc_trace+0x18c/0x2c0 [ 8.350933] do_init_module+0x62/0x290 [ 8.350940] load_module+0xaa3/0xb30 [ 8.350944] __do_sys_finit_module+0xbf/0x120 [ 8.350948] __x64_sys_finit_module+0x18/0x20 [ 8.350951] do_syscall_64+0x59/0xc0 [ 8.350955] ? exit_to_user_mode_prepare+0x37/0xb0 [ 8.350959] ? irqentry_exit_to_user_mode+0x9/0x20 [ 8.350963] ? irqentry_exit+0x19/0x30 [ 8.350965] ? exc_page_fault+0x89/0x160 [ 8.350968] ? asm_exc_page_fault+0x8/0x30 [ 8.350971] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 8.350975] RIP: 0033:0x7f68ba7fc94d [ 8.350978] Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d b3 64 0f 00 f7 d8 64 89 01 48 [ 8.350980] RSP: 002b:00007ffc7e0b93c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 8.350984] RAX: ffffffffffffffda RBX: 000055bbb29a4a00 RCX: 00007f68ba7fc94d [ 8.350985] RDX: 0000000000000000 RSI: 00007f68ba9923fe RDI: 0000000000000006 [ 8.350987] RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000000 [ 8.350988] R10: 0000000000000006 R11: 0000000000000246 R12: 00007f68ba9923fe [ 8.350989] R13: 000055bbb28e3a20 R14: 000055bbb297d940 R15: 000055bbb297ea60 Signed-off-by: Thadeu Lima de Souza Cascardo <[email protected]> Acked-by: Andrea Righi <[email protected]> Signed-off-by: Paolo Pisati <[email protected]>
|
please reopen the issue over at https://gitlab.com/tuxedocomputers/development/packages/linux and add whitch generation of polaris you have a problem with |
tuxedo-bot
pushed a commit
that referenced
this issue
Sep 11, 2024
BugLink: https://bugs.launchpad.net/bugs/1942215 When the Timer operation is called, there are no arguments, and acpi_ex_resolve_operands will be called with an out-of-bounds stack pointer as num_operands is 0. This does not usually cause any problems, as acpi_ex_resolve_operands will ignore the parameter when the operation requires no arguments, as is the case. However, when the code is compiled with UBSAN, it will trigger, leading to an oops with invalid opcode on Linux. Fix it by using a NULL parameter when num_operands is 0. [ 8.285428] invalid opcode: 0000 [#1] SMP NOPTI [ 8.286436] CPU: 18 PID: 1522 Comm: systemd-udevd Not tainted 5.15.0-10-generic #10 [ 8.287505] Hardware name: Intel Corporation S2600WFD/S2600WFD, BIOS SE5C620.86B.0D.01.0395.022720191340 02/27/2019 [ 8.288495] RIP: 0010:acpi_ds_exec_end_op+0x1be/0x7a6 [ 8.289658] Code: 7b 0a 48 89 da 44 89 45 d4 48 98 48 8d 34 c3 e8 f8 3c 01 00 44 8b 45 d4 85 c0 41 89 c6 75 22 eb 9e 44 89 c0 41 80 f8 0b 76 02 <0f> 0b 48 8b 04 c5 c0 c0 ca aa 48 89 df ff d0 0f 1f 00 41 89 c4 eb [ 8.291858] RSP: 0018:ffffc38561a3f6d0 EFLAGS: 00010286 [ 8.292888] RAX: 0000000000000000 RBX: ffffa0aa87c91800 RCX: 0000000000000040 [ 8.294056] RDX: ffffffffffffffff RSI: ffffffffaacabf40 RDI: 00000000000002cb [ 8.295839] RBP: ffffc38561a3f700 R08: 0000000000000000 R09: ffffa0aa9f5a1000 [ 8.296030] IPMI message handler: version 39.2 [ 8.297554] R10: ffffa0aa89cdec00 R11: 0000000000000003 R12: 0000000000000000 [ 8.297556] R13: ffffa0aa9f5a10a0 R14: 0000000000000000 R15: 0000000000000000 [ 8.297558] FS: 00007f68ba26b8c0(0000) GS:ffffa0d60ca80000(0000) knlGS:0000000000000000 [ 8.297560] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8.297561] CR2: 00007fdbb3b9eec8 CR3: 00000001176ba001 CR4: 00000000007706e0 [ 8.297563] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8.297564] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 8.297565] PKRU: 55555554 [ 8.297566] Call Trace: [ 8.297569] acpi_ps_parse_loop+0x587/0x660 [ 8.297574] acpi_ps_parse_aml+0x1af/0x552 [ 8.297578] acpi_ps_execute_method+0x208/0x2ca [ 8.297580] acpi_ns_evaluate+0x34e/0x4f0 [ 8.297583] acpi_evaluate_object+0x18e/0x3b4 [ 8.297587] acpi_evaluate_dsm+0xb3/0x120 [ 8.297593] ? acpi_evaluate_dsm+0xb3/0x120 [ 8.297596] nfit_intel_shutdown_status+0xed/0x1a0 [nfit] [ 8.297606] acpi_nfit_add_dimm+0x3cb/0x660 [nfit] [ 8.297614] acpi_nfit_register_dimms+0x141/0x460 [nfit] [ 8.297620] acpi_nfit_init+0x54f/0x620 [nfit] [ 8.327895] acpi_nfit_add+0x18c/0x1f0 [nfit] [ 8.329341] acpi_device_probe+0x49/0x170 [ 8.330815] really_probe+0x209/0x410 [ 8.330820] __driver_probe_device+0x109/0x180 [ 8.330823] driver_probe_device+0x23/0x90 [ 8.330825] __driver_attach+0xac/0x1b0 [ 8.330828] ? __device_attach_driver+0xe0/0xe0 [ 8.330831] bus_for_each_dev+0x7c/0xc0 [ 8.330834] driver_attach+0x1e/0x20 [ 8.330835] bus_add_driver+0x135/0x1f0 [ 8.330837] driver_register+0x95/0xf0 [ 8.330840] acpi_bus_register_driver+0x39/0x50 [ 8.344874] nfit_init+0x168/0x1000 [nfit] [ 8.344882] ? 0xffffffffc0735000 [ 8.344885] do_one_initcall+0x46/0x1d0 [ 8.350927] ? kmem_cache_alloc_trace+0x18c/0x2c0 [ 8.350933] do_init_module+0x62/0x290 [ 8.350940] load_module+0xaa3/0xb30 [ 8.350944] __do_sys_finit_module+0xbf/0x120 [ 8.350948] __x64_sys_finit_module+0x18/0x20 [ 8.350951] do_syscall_64+0x59/0xc0 [ 8.350955] ? exit_to_user_mode_prepare+0x37/0xb0 [ 8.350959] ? irqentry_exit_to_user_mode+0x9/0x20 [ 8.350963] ? irqentry_exit+0x19/0x30 [ 8.350965] ? exc_page_fault+0x89/0x160 [ 8.350968] ? asm_exc_page_fault+0x8/0x30 [ 8.350971] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 8.350975] RIP: 0033:0x7f68ba7fc94d [ 8.350978] Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d b3 64 0f 00 f7 d8 64 89 01 48 [ 8.350980] RSP: 002b:00007ffc7e0b93c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 8.350984] RAX: ffffffffffffffda RBX: 000055bbb29a4a00 RCX: 00007f68ba7fc94d [ 8.350985] RDX: 0000000000000000 RSI: 00007f68ba9923fe RDI: 0000000000000006 [ 8.350987] RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000000 [ 8.350988] R10: 0000000000000006 R11: 0000000000000246 R12: 00007f68ba9923fe [ 8.350989] R13: 000055bbb28e3a20 R14: 000055bbb297d940 R15: 000055bbb297ea60 Signed-off-by: Thadeu Lima de Souza Cascardo <[email protected]> Acked-by: Andrea Righi <[email protected]> Signed-off-by: Paolo Pisati <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Sep 13, 2024
BugLink: https://bugs.launchpad.net/bugs/2076435 commit be346c1 upstream. The code in ocfs2_dio_end_io_write() estimates number of necessary transaction credits using ocfs2_calc_extend_credits(). This however does not take into account that the IO could be arbitrarily large and can contain arbitrary number of extents. Extent tree manipulations do often extend the current transaction but not in all of the cases. For example if we have only single block extents in the tree, ocfs2_mark_extent_written() will end up calling ocfs2_replace_extent_rec() all the time and we will never extend the current transaction and eventually exhaust all the transaction credits if the IO contains many single block extents. Once that happens a WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to this error. This was actually triggered by one of our customers on a heavily fragmented OCFS2 filesystem. To fix the issue make sure the transaction always has enough credits for one extent insert before each call of ocfs2_mark_extent_written(). Heming Zhao said: ------ PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error" PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA" #0 machine_kexec at ffffffff8c069932 #1 __crash_kexec at ffffffff8c1338fa #2 panic at ffffffff8c1d69b9 #3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2] #4 __ocfs2_abort at ffffffffc0c88387 [ocfs2] #5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2] #6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2] #7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2] #8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2] #9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2] #10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2] #11 dio_complete at ffffffff8c2b9fa7 #12 do_blockdev_direct_IO at ffffffff8c2bc09f #13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2] #14 generic_file_direct_write at ffffffff8c1dcf14 #15 __generic_file_write_iter at ffffffff8c1dd07b #16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2] #17 aio_write at ffffffff8c2cc72e #18 kmem_cache_alloc at ffffffff8c248dde #19 do_io_submit at ffffffff8c2ccada #20 do_syscall_64 at ffffffff8c004984 #21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Jan Kara <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Reviewed-by: Heming Zhao <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Jun Piao <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Sep 13, 2024
BugLink: https://bugs.launchpad.net/bugs/2077600 commit d99fbd9 upstream. Bos can be put with multiple unrelated dma-resv locks held. But imported bos attempt to grab the bo dma-resv during dma-buf detach that typically happens during cleanup. That leads to lockde splats similar to the below and a potential ABBA deadlock. Fix this by always taking the delayed workqueue cleanup path for imported bos. Requesting stable fixes from when the Xe driver was introduced, since its usage of drm_exec and wide vm dma_resvs appear to be the first reliable trigger of this. [22982.116427] ============================================ [22982.116428] WARNING: possible recursive locking detected [22982.116429] 6.10.0-rc2+ #10 Tainted: G U W [22982.116430] -------------------------------------------- [22982.116430] glxgears:sh0/5785 is trying to acquire lock: [22982.116431] ffff8c2bafa539a8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: dma_buf_detach+0x3b/0xf0 [22982.116438] but task is already holding lock: [22982.116438] ffff8c2d9aba6da8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: drm_exec_lock_obj+0x49/0x2b0 [drm_exec] [22982.116442] other info that might help us debug this: [22982.116442] Possible unsafe locking scenario: [22982.116443] CPU0 [22982.116444] ---- [22982.116444] lock(reservation_ww_class_mutex); [22982.116445] lock(reservation_ww_class_mutex); [22982.116447] *** DEADLOCK *** [22982.116447] May be due to missing lock nesting notation [22982.116448] 5 locks held by glxgears:sh0/5785: [22982.116449] #0: ffff8c2d9aba58c8 (&xef->vm.lock){+.+.}-{3:3}, at: xe_file_close+0xde/0x1c0 [xe] [22982.116507] #1: ffff8c2e28cc8480 (&vm->lock){++++}-{3:3}, at: xe_vm_close_and_put+0x161/0x9b0 [xe] [22982.116578] #2: ffff8c2e31982970 (&val->lock){.+.+}-{3:3}, at: xe_validation_ctx_init+0x6d/0x70 [xe] [22982.116647] #3: ffffacdc469478a8 (reservation_ww_class_acquire){+.+.}-{0:0}, at: xe_vma_destroy_unlocked+0x7f/0xe0 [xe] [22982.116716] #4: ffff8c2d9aba6da8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: drm_exec_lock_obj+0x49/0x2b0 [drm_exec] [22982.116719] stack backtrace: [22982.116720] CPU: 8 PID: 5785 Comm: glxgears:sh0 Tainted: G U W 6.10.0-rc2+ #10 [22982.116721] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 2001 02/01/2023 [22982.116723] Call Trace: [22982.116724] <TASK> [22982.116725] dump_stack_lvl+0x77/0xb0 [22982.116727] __lock_acquire+0x1232/0x2160 [22982.116730] lock_acquire+0xcb/0x2d0 [22982.116732] ? dma_buf_detach+0x3b/0xf0 [22982.116734] ? __lock_acquire+0x417/0x2160 [22982.116736] __ww_mutex_lock.constprop.0+0xd0/0x13b0 [22982.116738] ? dma_buf_detach+0x3b/0xf0 [22982.116741] ? dma_buf_detach+0x3b/0xf0 [22982.116743] ? ww_mutex_lock+0x2b/0x90 [22982.116745] ww_mutex_lock+0x2b/0x90 [22982.116747] dma_buf_detach+0x3b/0xf0 [22982.116749] drm_prime_gem_destroy+0x2f/0x40 [drm] [22982.116775] xe_ttm_bo_destroy+0x32/0x220 [xe] [22982.116818] ? __mutex_unlock_slowpath+0x3a/0x290 [22982.116821] drm_exec_unlock_all+0xa1/0xd0 [drm_exec] [22982.116823] drm_exec_fini+0x12/0xb0 [drm_exec] [22982.116824] xe_validation_ctx_fini+0x15/0x40 [xe] [22982.116892] xe_vma_destroy_unlocked+0xb1/0xe0 [xe] [22982.116959] xe_vm_close_and_put+0x41a/0x9b0 [xe] [22982.117025] ? xa_find+0xe3/0x1e0 [22982.117028] xe_file_close+0x10a/0x1c0 [xe] [22982.117074] drm_file_free+0x22a/0x280 [drm] [22982.117099] drm_release_noglobal+0x22/0x70 [drm] [22982.117119] __fput+0xf1/0x2d0 [22982.117122] task_work_run+0x59/0x90 [22982.117125] do_exit+0x330/0xb40 [22982.117127] do_group_exit+0x36/0xa0 [22982.117129] get_signal+0xbd2/0xbe0 [22982.117131] arch_do_signal_or_restart+0x3e/0x240 [22982.117134] syscall_exit_to_user_mode+0x1e7/0x290 [22982.117137] do_syscall_64+0xa1/0x180 [22982.117139] ? lock_acquire+0xcb/0x2d0 [22982.117140] ? __set_task_comm+0x28/0x1e0 [22982.117141] ? find_held_lock+0x2b/0x80 [22982.117144] ? __set_task_comm+0xe1/0x1e0 [22982.117145] ? lock_release+0xca/0x290 [22982.117147] ? __do_sys_prctl+0x245/0xab0 [22982.117149] ? lockdep_hardirqs_on_prepare+0xde/0x190 [22982.117150] ? syscall_exit_to_user_mode+0xb0/0x290 [22982.117152] ? do_syscall_64+0xa1/0x180 [22982.117154] ? __lock_acquire+0x417/0x2160 [22982.117155] ? reacquire_held_locks+0xd1/0x1f0 [22982.117156] ? do_user_addr_fault+0x30c/0x790 [22982.117158] ? lock_acquire+0xcb/0x2d0 [22982.117160] ? find_held_lock+0x2b/0x80 [22982.117162] ? do_user_addr_fault+0x357/0x790 [22982.117163] ? lock_release+0xca/0x290 [22982.117164] ? do_user_addr_fault+0x361/0x790 [22982.117166] ? trace_hardirqs_off+0x4b/0xc0 [22982.117168] ? clear_bhb_loop+0x45/0xa0 [22982.117170] ? clear_bhb_loop+0x45/0xa0 [22982.117172] ? clear_bhb_loop+0x45/0xa0 [22982.117174] entry_SYSCALL_64_after_hwframe+0x76/0x7e [22982.117176] RIP: 0033:0x7f943d267169 [22982.117192] Code: Unable to access opcode bytes at 0x7f943d26713f. [22982.117193] RSP: 002b:00007f9430bffc80 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca [22982.117195] RAX: fffffffffffffe00 RBX: 0000000000000000 RCX: 00007f943d267169 [22982.117196] RDX: 0000000000000000 RSI: 0000000000000189 RDI: 00005622f89579d0 [22982.117197] RBP: 00007f9430bffcb0 R08: 0000000000000000 R09: 00000000ffffffff [22982.117198] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [22982.117199] R13: 0000000000000000 R14: 0000000000000000 R15: 00005622f89579d0 [22982.117202] </TASK> Fixes: dd08ebf ("drm/xe: Introduce a new DRM driver for Intel GPUs") Cc: Christian König <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: [email protected] Cc: [email protected] Cc: <[email protected]> # v6.8+ Signed-off-by: Thomas Hellström <[email protected]> Reviewed-by: Matthew Brost <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Reviewed-by: Christian König <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Sep 17, 2024
BugLink: https://bugs.launchpad.net/bugs/1942215 When the Timer operation is called, there are no arguments, and acpi_ex_resolve_operands will be called with an out-of-bounds stack pointer as num_operands is 0. This does not usually cause any problems, as acpi_ex_resolve_operands will ignore the parameter when the operation requires no arguments, as is the case. However, when the code is compiled with UBSAN, it will trigger, leading to an oops with invalid opcode on Linux. Fix it by using a NULL parameter when num_operands is 0. [ 8.285428] invalid opcode: 0000 [#1] SMP NOPTI [ 8.286436] CPU: 18 PID: 1522 Comm: systemd-udevd Not tainted 5.15.0-10-generic #10 [ 8.287505] Hardware name: Intel Corporation S2600WFD/S2600WFD, BIOS SE5C620.86B.0D.01.0395.022720191340 02/27/2019 [ 8.288495] RIP: 0010:acpi_ds_exec_end_op+0x1be/0x7a6 [ 8.289658] Code: 7b 0a 48 89 da 44 89 45 d4 48 98 48 8d 34 c3 e8 f8 3c 01 00 44 8b 45 d4 85 c0 41 89 c6 75 22 eb 9e 44 89 c0 41 80 f8 0b 76 02 <0f> 0b 48 8b 04 c5 c0 c0 ca aa 48 89 df ff d0 0f 1f 00 41 89 c4 eb [ 8.291858] RSP: 0018:ffffc38561a3f6d0 EFLAGS: 00010286 [ 8.292888] RAX: 0000000000000000 RBX: ffffa0aa87c91800 RCX: 0000000000000040 [ 8.294056] RDX: ffffffffffffffff RSI: ffffffffaacabf40 RDI: 00000000000002cb [ 8.295839] RBP: ffffc38561a3f700 R08: 0000000000000000 R09: ffffa0aa9f5a1000 [ 8.296030] IPMI message handler: version 39.2 [ 8.297554] R10: ffffa0aa89cdec00 R11: 0000000000000003 R12: 0000000000000000 [ 8.297556] R13: ffffa0aa9f5a10a0 R14: 0000000000000000 R15: 0000000000000000 [ 8.297558] FS: 00007f68ba26b8c0(0000) GS:ffffa0d60ca80000(0000) knlGS:0000000000000000 [ 8.297560] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8.297561] CR2: 00007fdbb3b9eec8 CR3: 00000001176ba001 CR4: 00000000007706e0 [ 8.297563] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8.297564] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 8.297565] PKRU: 55555554 [ 8.297566] Call Trace: [ 8.297569] acpi_ps_parse_loop+0x587/0x660 [ 8.297574] acpi_ps_parse_aml+0x1af/0x552 [ 8.297578] acpi_ps_execute_method+0x208/0x2ca [ 8.297580] acpi_ns_evaluate+0x34e/0x4f0 [ 8.297583] acpi_evaluate_object+0x18e/0x3b4 [ 8.297587] acpi_evaluate_dsm+0xb3/0x120 [ 8.297593] ? acpi_evaluate_dsm+0xb3/0x120 [ 8.297596] nfit_intel_shutdown_status+0xed/0x1a0 [nfit] [ 8.297606] acpi_nfit_add_dimm+0x3cb/0x660 [nfit] [ 8.297614] acpi_nfit_register_dimms+0x141/0x460 [nfit] [ 8.297620] acpi_nfit_init+0x54f/0x620 [nfit] [ 8.327895] acpi_nfit_add+0x18c/0x1f0 [nfit] [ 8.329341] acpi_device_probe+0x49/0x170 [ 8.330815] really_probe+0x209/0x410 [ 8.330820] __driver_probe_device+0x109/0x180 [ 8.330823] driver_probe_device+0x23/0x90 [ 8.330825] __driver_attach+0xac/0x1b0 [ 8.330828] ? __device_attach_driver+0xe0/0xe0 [ 8.330831] bus_for_each_dev+0x7c/0xc0 [ 8.330834] driver_attach+0x1e/0x20 [ 8.330835] bus_add_driver+0x135/0x1f0 [ 8.330837] driver_register+0x95/0xf0 [ 8.330840] acpi_bus_register_driver+0x39/0x50 [ 8.344874] nfit_init+0x168/0x1000 [nfit] [ 8.344882] ? 0xffffffffc0735000 [ 8.344885] do_one_initcall+0x46/0x1d0 [ 8.350927] ? kmem_cache_alloc_trace+0x18c/0x2c0 [ 8.350933] do_init_module+0x62/0x290 [ 8.350940] load_module+0xaa3/0xb30 [ 8.350944] __do_sys_finit_module+0xbf/0x120 [ 8.350948] __x64_sys_finit_module+0x18/0x20 [ 8.350951] do_syscall_64+0x59/0xc0 [ 8.350955] ? exit_to_user_mode_prepare+0x37/0xb0 [ 8.350959] ? irqentry_exit_to_user_mode+0x9/0x20 [ 8.350963] ? irqentry_exit+0x19/0x30 [ 8.350965] ? exc_page_fault+0x89/0x160 [ 8.350968] ? asm_exc_page_fault+0x8/0x30 [ 8.350971] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 8.350975] RIP: 0033:0x7f68ba7fc94d [ 8.350978] Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d b3 64 0f 00 f7 d8 64 89 01 48 [ 8.350980] RSP: 002b:00007ffc7e0b93c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 8.350984] RAX: ffffffffffffffda RBX: 000055bbb29a4a00 RCX: 00007f68ba7fc94d [ 8.350985] RDX: 0000000000000000 RSI: 00007f68ba9923fe RDI: 0000000000000006 [ 8.350987] RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000000 [ 8.350988] R10: 0000000000000006 R11: 0000000000000246 R12: 00007f68ba9923fe [ 8.350989] R13: 000055bbb28e3a20 R14: 000055bbb297d940 R15: 000055bbb297ea60 Signed-off-by: Thadeu Lima de Souza Cascardo <[email protected]> Acked-by: Andrea Righi <[email protected]> Signed-off-by: Paolo Pisati <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Sep 27, 2024
BugLink: https://bugs.launchpad.net/bugs/2076435 commit be346c1 upstream. The code in ocfs2_dio_end_io_write() estimates number of necessary transaction credits using ocfs2_calc_extend_credits(). This however does not take into account that the IO could be arbitrarily large and can contain arbitrary number of extents. Extent tree manipulations do often extend the current transaction but not in all of the cases. For example if we have only single block extents in the tree, ocfs2_mark_extent_written() will end up calling ocfs2_replace_extent_rec() all the time and we will never extend the current transaction and eventually exhaust all the transaction credits if the IO contains many single block extents. Once that happens a WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to this error. This was actually triggered by one of our customers on a heavily fragmented OCFS2 filesystem. To fix the issue make sure the transaction always has enough credits for one extent insert before each call of ocfs2_mark_extent_written(). Heming Zhao said: ------ PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error" PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA" #0 machine_kexec at ffffffff8c069932 #1 __crash_kexec at ffffffff8c1338fa #2 panic at ffffffff8c1d69b9 #3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2] #4 __ocfs2_abort at ffffffffc0c88387 [ocfs2] #5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2] #6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2] #7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2] #8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2] #9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2] #10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2] #11 dio_complete at ffffffff8c2b9fa7 #12 do_blockdev_direct_IO at ffffffff8c2bc09f #13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2] #14 generic_file_direct_write at ffffffff8c1dcf14 #15 __generic_file_write_iter at ffffffff8c1dd07b #16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2] #17 aio_write at ffffffff8c2cc72e #18 kmem_cache_alloc at ffffffff8c248dde #19 do_io_submit at ffffffff8c2ccada #20 do_syscall_64 at ffffffff8c004984 #21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Jan Kara <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Reviewed-by: Heming Zhao <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Jun Piao <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Sep 27, 2024
BugLink: https://bugs.launchpad.net/bugs/2077600 commit d99fbd9 upstream. Bos can be put with multiple unrelated dma-resv locks held. But imported bos attempt to grab the bo dma-resv during dma-buf detach that typically happens during cleanup. That leads to lockde splats similar to the below and a potential ABBA deadlock. Fix this by always taking the delayed workqueue cleanup path for imported bos. Requesting stable fixes from when the Xe driver was introduced, since its usage of drm_exec and wide vm dma_resvs appear to be the first reliable trigger of this. [22982.116427] ============================================ [22982.116428] WARNING: possible recursive locking detected [22982.116429] 6.10.0-rc2+ #10 Tainted: G U W [22982.116430] -------------------------------------------- [22982.116430] glxgears:sh0/5785 is trying to acquire lock: [22982.116431] ffff8c2bafa539a8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: dma_buf_detach+0x3b/0xf0 [22982.116438] but task is already holding lock: [22982.116438] ffff8c2d9aba6da8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: drm_exec_lock_obj+0x49/0x2b0 [drm_exec] [22982.116442] other info that might help us debug this: [22982.116442] Possible unsafe locking scenario: [22982.116443] CPU0 [22982.116444] ---- [22982.116444] lock(reservation_ww_class_mutex); [22982.116445] lock(reservation_ww_class_mutex); [22982.116447] *** DEADLOCK *** [22982.116447] May be due to missing lock nesting notation [22982.116448] 5 locks held by glxgears:sh0/5785: [22982.116449] #0: ffff8c2d9aba58c8 (&xef->vm.lock){+.+.}-{3:3}, at: xe_file_close+0xde/0x1c0 [xe] [22982.116507] #1: ffff8c2e28cc8480 (&vm->lock){++++}-{3:3}, at: xe_vm_close_and_put+0x161/0x9b0 [xe] [22982.116578] #2: ffff8c2e31982970 (&val->lock){.+.+}-{3:3}, at: xe_validation_ctx_init+0x6d/0x70 [xe] [22982.116647] #3: ffffacdc469478a8 (reservation_ww_class_acquire){+.+.}-{0:0}, at: xe_vma_destroy_unlocked+0x7f/0xe0 [xe] [22982.116716] #4: ffff8c2d9aba6da8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: drm_exec_lock_obj+0x49/0x2b0 [drm_exec] [22982.116719] stack backtrace: [22982.116720] CPU: 8 PID: 5785 Comm: glxgears:sh0 Tainted: G U W 6.10.0-rc2+ #10 [22982.116721] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 2001 02/01/2023 [22982.116723] Call Trace: [22982.116724] <TASK> [22982.116725] dump_stack_lvl+0x77/0xb0 [22982.116727] __lock_acquire+0x1232/0x2160 [22982.116730] lock_acquire+0xcb/0x2d0 [22982.116732] ? dma_buf_detach+0x3b/0xf0 [22982.116734] ? __lock_acquire+0x417/0x2160 [22982.116736] __ww_mutex_lock.constprop.0+0xd0/0x13b0 [22982.116738] ? dma_buf_detach+0x3b/0xf0 [22982.116741] ? dma_buf_detach+0x3b/0xf0 [22982.116743] ? ww_mutex_lock+0x2b/0x90 [22982.116745] ww_mutex_lock+0x2b/0x90 [22982.116747] dma_buf_detach+0x3b/0xf0 [22982.116749] drm_prime_gem_destroy+0x2f/0x40 [drm] [22982.116775] xe_ttm_bo_destroy+0x32/0x220 [xe] [22982.116818] ? __mutex_unlock_slowpath+0x3a/0x290 [22982.116821] drm_exec_unlock_all+0xa1/0xd0 [drm_exec] [22982.116823] drm_exec_fini+0x12/0xb0 [drm_exec] [22982.116824] xe_validation_ctx_fini+0x15/0x40 [xe] [22982.116892] xe_vma_destroy_unlocked+0xb1/0xe0 [xe] [22982.116959] xe_vm_close_and_put+0x41a/0x9b0 [xe] [22982.117025] ? xa_find+0xe3/0x1e0 [22982.117028] xe_file_close+0x10a/0x1c0 [xe] [22982.117074] drm_file_free+0x22a/0x280 [drm] [22982.117099] drm_release_noglobal+0x22/0x70 [drm] [22982.117119] __fput+0xf1/0x2d0 [22982.117122] task_work_run+0x59/0x90 [22982.117125] do_exit+0x330/0xb40 [22982.117127] do_group_exit+0x36/0xa0 [22982.117129] get_signal+0xbd2/0xbe0 [22982.117131] arch_do_signal_or_restart+0x3e/0x240 [22982.117134] syscall_exit_to_user_mode+0x1e7/0x290 [22982.117137] do_syscall_64+0xa1/0x180 [22982.117139] ? lock_acquire+0xcb/0x2d0 [22982.117140] ? __set_task_comm+0x28/0x1e0 [22982.117141] ? find_held_lock+0x2b/0x80 [22982.117144] ? __set_task_comm+0xe1/0x1e0 [22982.117145] ? lock_release+0xca/0x290 [22982.117147] ? __do_sys_prctl+0x245/0xab0 [22982.117149] ? lockdep_hardirqs_on_prepare+0xde/0x190 [22982.117150] ? syscall_exit_to_user_mode+0xb0/0x290 [22982.117152] ? do_syscall_64+0xa1/0x180 [22982.117154] ? __lock_acquire+0x417/0x2160 [22982.117155] ? reacquire_held_locks+0xd1/0x1f0 [22982.117156] ? do_user_addr_fault+0x30c/0x790 [22982.117158] ? lock_acquire+0xcb/0x2d0 [22982.117160] ? find_held_lock+0x2b/0x80 [22982.117162] ? do_user_addr_fault+0x357/0x790 [22982.117163] ? lock_release+0xca/0x290 [22982.117164] ? do_user_addr_fault+0x361/0x790 [22982.117166] ? trace_hardirqs_off+0x4b/0xc0 [22982.117168] ? clear_bhb_loop+0x45/0xa0 [22982.117170] ? clear_bhb_loop+0x45/0xa0 [22982.117172] ? clear_bhb_loop+0x45/0xa0 [22982.117174] entry_SYSCALL_64_after_hwframe+0x76/0x7e [22982.117176] RIP: 0033:0x7f943d267169 [22982.117192] Code: Unable to access opcode bytes at 0x7f943d26713f. [22982.117193] RSP: 002b:00007f9430bffc80 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca [22982.117195] RAX: fffffffffffffe00 RBX: 0000000000000000 RCX: 00007f943d267169 [22982.117196] RDX: 0000000000000000 RSI: 0000000000000189 RDI: 00005622f89579d0 [22982.117197] RBP: 00007f9430bffcb0 R08: 0000000000000000 R09: 00000000ffffffff [22982.117198] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [22982.117199] R13: 0000000000000000 R14: 0000000000000000 R15: 00005622f89579d0 [22982.117202] </TASK> Fixes: dd08ebf ("drm/xe: Introduce a new DRM driver for Intel GPUs") Cc: Christian König <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: [email protected] Cc: [email protected] Cc: <[email protected]> # v6.8+ Signed-off-by: Thomas Hellström <[email protected]> Reviewed-by: Matthew Brost <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Reviewed-by: Christian König <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Oct 8, 2024
BugLink: https://bugs.launchpad.net/bugs/2080594 [ Upstream commit a699781 ] A sysfs reader can race with a device reset or removal, attempting to read device state when the device is not actually present. eg: [exception RIP: qed_get_current_link+17] #8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede] #9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3 #10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4 #11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300 #12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c #13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b #14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3 #15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1 #16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f #17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb crash> struct net_device.state ffff9a9d21336000 state = 5, state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100). The device is not present, note lack of __LINK_STATE_PRESENT (0b10). This is the same sort of panic as observed in commit 4224cfd ("net-sysfs: add check for netdevice being present to speed_show"). There are many other callers of __ethtool_get_link_ksettings() which don't have a device presence check. Move this check into ethtool to protect all callers. Fixes: d519e17 ("net: export device speed and duplex via sysfs") Fixes: 4224cfd ("net-sysfs: add check for netdevice being present to speed_show") Signed-off-by: Jamie Bainbridge <[email protected]> Link: https://patch.msgid.link/8bae218864beaa44ed01628140475b9bf641c5b0.1724393671.git.jamie.bainbridge@gmail.com Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Koichiro Den <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Nov 15, 2024
BugLink: https://bugs.launchpad.net/bugs/2086242 commit 7d59ac0 upstream. Attaching SST PCI device to VM causes "BUG: KASAN: slab-out-of-bounds". kasan report: [ 19.411889] ================================================================== [ 19.413702] BUG: KASAN: slab-out-of-bounds in _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.415634] Read of size 8 at addr ffff888829e65200 by task cpuhp/16/113 [ 19.417368] [ 19.418627] CPU: 16 PID: 113 Comm: cpuhp/16 Tainted: G E 6.9.0 #10 [ 19.420435] Hardware name: VMware, Inc. VMware20,1/440BX Desktop Reference Platform, BIOS VMW201.00V.20192059.B64.2207280713 07/28/2022 [ 19.422687] Call Trace: [ 19.424091] <TASK> [ 19.425448] dump_stack_lvl+0x5d/0x80 [ 19.426963] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.428694] print_report+0x19d/0x52e [ 19.430206] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 19.431837] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.433539] kasan_report+0xf0/0x170 [ 19.435019] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.436709] _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.438379] ? __pfx_sched_clock_cpu+0x10/0x10 [ 19.439910] isst_if_cpu_online+0x406/0x58f [isst_if_common] [ 19.441573] ? __pfx_isst_if_cpu_online+0x10/0x10 [isst_if_common] [ 19.443263] ? ttwu_queue_wakelist+0x2c1/0x360 [ 19.444797] cpuhp_invoke_callback+0x221/0xec0 [ 19.446337] cpuhp_thread_fun+0x21b/0x610 [ 19.447814] ? __pfx_cpuhp_thread_fun+0x10/0x10 [ 19.449354] smpboot_thread_fn+0x2e7/0x6e0 [ 19.450859] ? __pfx_smpboot_thread_fn+0x10/0x10 [ 19.452405] kthread+0x29c/0x350 [ 19.453817] ? __pfx_kthread+0x10/0x10 [ 19.455253] ret_from_fork+0x31/0x70 [ 19.456685] ? __pfx_kthread+0x10/0x10 [ 19.458114] ret_from_fork_asm+0x1a/0x30 [ 19.459573] </TASK> [ 19.460853] [ 19.462055] Allocated by task 1198: [ 19.463410] kasan_save_stack+0x30/0x50 [ 19.464788] kasan_save_track+0x14/0x30 [ 19.466139] __kasan_kmalloc+0xaa/0xb0 [ 19.467465] __kmalloc+0x1cd/0x470 [ 19.468748] isst_if_cdev_register+0x1da/0x350 [isst_if_common] [ 19.470233] isst_if_mbox_init+0x108/0xff0 [isst_if_mbox_msr] [ 19.471670] do_one_initcall+0xa4/0x380 [ 19.472903] do_init_module+0x238/0x760 [ 19.474105] load_module+0x5239/0x6f00 [ 19.475285] init_module_from_file+0xd1/0x130 [ 19.476506] idempotent_init_module+0x23b/0x650 [ 19.477725] __x64_sys_finit_module+0xbe/0x130 [ 19.476506] idempotent_init_module+0x23b/0x650 [ 19.477725] __x64_sys_finit_module+0xbe/0x130 [ 19.478920] do_syscall_64+0x82/0x160 [ 19.480036] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 19.481292] [ 19.482205] The buggy address belongs to the object at ffff888829e65000 which belongs to the cache kmalloc-512 of size 512 [ 19.484818] The buggy address is located 0 bytes to the right of allocated 512-byte region [ffff888829e65000, ffff888829e65200) [ 19.487447] [ 19.488328] The buggy address belongs to the physical page: [ 19.489569] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888829e60c00 pfn:0x829e60 [ 19.491140] head: order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 19.492466] anon flags: 0x57ffffc0000840(slab|head|node=1|zone=2|lastcpupid=0x1fffff) [ 19.493914] page_type: 0xffffffff() [ 19.494988] raw: 0057ffffc0000840 ffff88810004cc80 0000000000000000 0000000000000001 [ 19.496451] raw: ffff888829e60c00 0000000080200018 00000001ffffffff 0000000000000000 [ 19.497906] head: 0057ffffc0000840 ffff88810004cc80 0000000000000000 0000000000000001 [ 19.499379] head: ffff888829e60c00 0000000080200018 00000001ffffffff 0000000000000000 [ 19.500844] head: 0057ffffc0000003 ffffea0020a79801 ffffea0020a79848 00000000ffffffff [ 19.502316] head: 0000000800000000 0000000000000000 00000000ffffffff 0000000000000000 [ 19.503784] page dumped because: kasan: bad access detected [ 19.505058] [ 19.505970] Memory state around the buggy address: [ 19.507172] ffff888829e65100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 19.508599] ffff888829e65180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 19.510013] >ffff888829e65200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 19.510014] ^ [ 19.510016] ffff888829e65280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 19.510018] ffff888829e65300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 19.515367] ================================================================== The reason for this error is physical_package_ids assigned by VMware VMM are not continuous and have gaps. This will cause value returned by topology_physical_package_id() to be more than topology_max_packages(). Here the allocation uses topology_max_packages(). The call to topology_max_packages() returns maximum logical package ID not physical ID. Hence use topology_logical_package_id() instead of topology_physical_package_id(). Fixes: 9a1aac8 ("platform/x86: ISST: PUNIT device mapping with Sub-NUMA clustering") Cc: [email protected] Acked-by: Srinivas Pandruvada <[email protected]> Signed-off-by: Zach Wade <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Koichiro Den <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Nov 15, 2024
BugLink: https://bugs.launchpad.net/bugs/2086242 commit ac01c8c upstream. AddressSanitizer found a use-after-free bug in the symbol code which manifested as 'perf top' segfaulting. ==1238389==ERROR: AddressSanitizer: heap-use-after-free on address 0x60b00c48844b at pc 0x5650d8035961 bp 0x7f751aaecc90 sp 0x7f751aaecc80 READ of size 1 at 0x60b00c48844b thread T193 #0 0x5650d8035960 in _sort__sym_cmp util/sort.c:310 #1 0x5650d8043744 in hist_entry__cmp util/hist.c:1286 #2 0x5650d8043951 in hists__findnew_entry util/hist.c:614 #3 0x5650d804568f in __hists__add_entry util/hist.c:754 #4 0x5650d8045bf9 in hists__add_entry util/hist.c:772 #5 0x5650d8045df1 in iter_add_single_normal_entry util/hist.c:997 #6 0x5650d8043326 in hist_entry_iter__add util/hist.c:1242 #7 0x5650d7ceeefe in perf_event__process_sample /home/matt/src/linux/tools/perf/builtin-top.c:845 #8 0x5650d7ceeefe in deliver_event /home/matt/src/linux/tools/perf/builtin-top.c:1208 #9 0x5650d7fdb51b in do_flush util/ordered-events.c:245 #10 0x5650d7fdb51b in __ordered_events__flush util/ordered-events.c:324 #11 0x5650d7ced743 in process_thread /home/matt/src/linux/tools/perf/builtin-top.c:1120 #12 0x7f757ef1f133 in start_thread nptl/pthread_create.c:442 #13 0x7f757ef9f7db in clone3 ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81 When updating hist maps it's also necessary to update the hist symbol reference because the old one gets freed in map__put(). While this bug was probably introduced with 5c24b67 ("perf tools: Replace map->referenced & maps->removed_maps with map->refcnt"), the symbol objects were leaked until c087e94 ("perf machine: Fix refcount usage when processing PERF_RECORD_KSYMBOL") was merged so the bug was masked. Fixes: c087e94 ("perf machine: Fix refcount usage when processing PERF_RECORD_KSYMBOL") Reported-by: Yunzhao Li <[email protected]> Signed-off-by: Matt Fleming (Cloudflare) <[email protected]> Cc: Ian Rogers <[email protected]> Cc: [email protected] Cc: Namhyung Kim <[email protected]> Cc: Riccardo Mancini <[email protected]> Cc: [email protected] # v5.13+ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Koichiro Den <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Nov 15, 2024
BugLink: https://bugs.launchpad.net/bugs/2086242 commit 9af2efe upstream. The fields in the hist_entry are filled on-demand which means they only have meaningful values when relevant sort keys are used. So if neither of 'dso' nor 'sym' sort keys are used, the map/symbols in the hist entry can be garbage. So it shouldn't access it unconditionally. I got a segfault, when I wanted to see cgroup profiles. $ sudo perf record -a --all-cgroups --synth=cgroup true $ sudo perf report -s cgroup Program received signal SIGSEGV, Segmentation fault. 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 48 return RC_CHK_ACCESS(map)->dso; (gdb) bt #0 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 #1 0x00005555557aa39b in map__load (map=0x0) at util/map.c:344 #2 0x00005555557aa592 in map__find_symbol (map=0x0, addr=140736115941088) at util/map.c:385 #3 0x00005555557ef000 in hists__findnew_entry (hists=0x555556039d60, entry=0x7fffffffa4c0, al=0x7fffffffa8c0, sample_self=true) at util/hist.c:644 #4 0x00005555557ef61c in __hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, block_info=0x0, sample=0x7fffffffaa90, sample_self=true, ops=0x0) at util/hist.c:761 #5 0x00005555557ef71f in hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, sample=0x7fffffffaa90, sample_self=true) at util/hist.c:779 #6 0x00005555557f00fb in iter_add_single_normal_entry (iter=0x7fffffffa900, al=0x7fffffffa8c0) at util/hist.c:1015 #7 0x00005555557f09a7 in hist_entry_iter__add (iter=0x7fffffffa900, al=0x7fffffffa8c0, max_stack_depth=127, arg=0x7fffffffbce0) at util/hist.c:1260 #8 0x00005555555ba7ce in process_sample_event (tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at builtin-report.c:334 #9 0x00005555557b30c8 in evlist__deliver_sample (evlist=0x555556039010, tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at util/session.c:1232 #10 0x00005555557b32bc in machines__deliver_event (machines=0x5555560388e8, evlist=0x555556039010, event=0x7ffff7c14128, sample=0x7fffffffaa90, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1271 #11 0x00005555557b3848 in perf_session__deliver_event (session=0x5555560386d0, event=0x7ffff7c14128, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1354 #12 0x00005555557affaf in ordered_events__deliver_event (oe=0x555556038e60, event=0x555556135aa0) at util/session.c:132 #13 0x00005555557bb605 in do_flush (oe=0x555556038e60, show_progress=false) at util/ordered-events.c:245 #14 0x00005555557bb95c in __ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND, timestamp=0) at util/ordered-events.c:324 #15 0x00005555557bba46 in ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND) at util/ordered-events.c:342 #16 0x00005555557b1b3b in perf_event__process_finished_round (tool=0x7fffffffbce0, event=0x7ffff7c15bb8, oe=0x555556038e60) at util/session.c:780 #17 0x00005555557b3b27 in perf_session__process_user_event (session=0x5555560386d0, event=0x7ffff7c15bb8, file_offset=117688, file_path=0x555556038ff0 "perf.data") at util/session.c:1406 As you can see the entry->ms.map was NULL even if he->ms.map has a value. This is because 'sym' sort key is not given, so it cannot assume whether he->ms.sym and entry->ms.sym is the same. I only checked the 'sym' sort key here as it implies 'dso' behavior (so maps are the same). Fixes: ac01c8c ("perf hist: Update hist symbol when updating maps") Signed-off-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Matt Fleming <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Koichiro Den <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Jan 17, 2025
BugLink: https://bugs.launchpad.net/bugs/2089884 commit 7d59ac0 upstream. Attaching SST PCI device to VM causes "BUG: KASAN: slab-out-of-bounds". kasan report: [ 19.411889] ================================================================== [ 19.413702] BUG: KASAN: slab-out-of-bounds in _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.415634] Read of size 8 at addr ffff888829e65200 by task cpuhp/16/113 [ 19.417368] [ 19.418627] CPU: 16 PID: 113 Comm: cpuhp/16 Tainted: G E 6.9.0 #10 [ 19.420435] Hardware name: VMware, Inc. VMware20,1/440BX Desktop Reference Platform, BIOS VMW201.00V.20192059.B64.2207280713 07/28/2022 [ 19.422687] Call Trace: [ 19.424091] <TASK> [ 19.425448] dump_stack_lvl+0x5d/0x80 [ 19.426963] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.428694] print_report+0x19d/0x52e [ 19.430206] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 19.431837] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.433539] kasan_report+0xf0/0x170 [ 19.435019] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.436709] _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.438379] ? __pfx_sched_clock_cpu+0x10/0x10 [ 19.439910] isst_if_cpu_online+0x406/0x58f [isst_if_common] [ 19.441573] ? __pfx_isst_if_cpu_online+0x10/0x10 [isst_if_common] [ 19.443263] ? ttwu_queue_wakelist+0x2c1/0x360 [ 19.444797] cpuhp_invoke_callback+0x221/0xec0 [ 19.446337] cpuhp_thread_fun+0x21b/0x610 [ 19.447814] ? __pfx_cpuhp_thread_fun+0x10/0x10 [ 19.449354] smpboot_thread_fn+0x2e7/0x6e0 [ 19.450859] ? __pfx_smpboot_thread_fn+0x10/0x10 [ 19.452405] kthread+0x29c/0x350 [ 19.453817] ? __pfx_kthread+0x10/0x10 [ 19.455253] ret_from_fork+0x31/0x70 [ 19.456685] ? __pfx_kthread+0x10/0x10 [ 19.458114] ret_from_fork_asm+0x1a/0x30 [ 19.459573] </TASK> [ 19.460853] [ 19.462055] Allocated by task 1198: [ 19.463410] kasan_save_stack+0x30/0x50 [ 19.464788] kasan_save_track+0x14/0x30 [ 19.466139] __kasan_kmalloc+0xaa/0xb0 [ 19.467465] __kmalloc+0x1cd/0x470 [ 19.468748] isst_if_cdev_register+0x1da/0x350 [isst_if_common] [ 19.470233] isst_if_mbox_init+0x108/0xff0 [isst_if_mbox_msr] [ 19.471670] do_one_initcall+0xa4/0x380 [ 19.472903] do_init_module+0x238/0x760 [ 19.474105] load_module+0x5239/0x6f00 [ 19.475285] init_module_from_file+0xd1/0x130 [ 19.476506] idempotent_init_module+0x23b/0x650 [ 19.477725] __x64_sys_finit_module+0xbe/0x130 [ 19.476506] idempotent_init_module+0x23b/0x650 [ 19.477725] __x64_sys_finit_module+0xbe/0x130 [ 19.478920] do_syscall_64+0x82/0x160 [ 19.480036] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 19.481292] [ 19.482205] The buggy address belongs to the object at ffff888829e65000 which belongs to the cache kmalloc-512 of size 512 [ 19.484818] The buggy address is located 0 bytes to the right of allocated 512-byte region [ffff888829e65000, ffff888829e65200) [ 19.487447] [ 19.488328] The buggy address belongs to the physical page: [ 19.489569] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888829e60c00 pfn:0x829e60 [ 19.491140] head: order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 19.492466] anon flags: 0x57ffffc0000840(slab|head|node=1|zone=2|lastcpupid=0x1fffff) [ 19.493914] page_type: 0xffffffff() [ 19.494988] raw: 0057ffffc0000840 ffff88810004cc80 0000000000000000 0000000000000001 [ 19.496451] raw: ffff888829e60c00 0000000080200018 00000001ffffffff 0000000000000000 [ 19.497906] head: 0057ffffc0000840 ffff88810004cc80 0000000000000000 0000000000000001 [ 19.499379] head: ffff888829e60c00 0000000080200018 00000001ffffffff 0000000000000000 [ 19.500844] head: 0057ffffc0000003 ffffea0020a79801 ffffea0020a79848 00000000ffffffff [ 19.502316] head: 0000000800000000 0000000000000000 00000000ffffffff 0000000000000000 [ 19.503784] page dumped because: kasan: bad access detected [ 19.505058] [ 19.505970] Memory state around the buggy address: [ 19.507172] ffff888829e65100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 19.508599] ffff888829e65180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 19.510013] >ffff888829e65200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 19.510014] ^ [ 19.510016] ffff888829e65280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 19.510018] ffff888829e65300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 19.515367] ================================================================== The reason for this error is physical_package_ids assigned by VMware VMM are not continuous and have gaps. This will cause value returned by topology_physical_package_id() to be more than topology_max_packages(). Here the allocation uses topology_max_packages(). The call to topology_max_packages() returns maximum logical package ID not physical ID. Hence use topology_logical_package_id() instead of topology_physical_package_id(). Fixes: 9a1aac8 ("platform/x86: ISST: PUNIT device mapping with Sub-NUMA clustering") Cc: [email protected] Acked-by: Srinivas Pandruvada <[email protected]> Signed-off-by: Zach Wade <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Koichiro Den <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Jan 17, 2025
BugLink: https://bugs.launchpad.net/bugs/2089884 commit ac01c8c upstream. AddressSanitizer found a use-after-free bug in the symbol code which manifested as 'perf top' segfaulting. ==1238389==ERROR: AddressSanitizer: heap-use-after-free on address 0x60b00c48844b at pc 0x5650d8035961 bp 0x7f751aaecc90 sp 0x7f751aaecc80 READ of size 1 at 0x60b00c48844b thread T193 #0 0x5650d8035960 in _sort__sym_cmp util/sort.c:310 #1 0x5650d8043744 in hist_entry__cmp util/hist.c:1286 #2 0x5650d8043951 in hists__findnew_entry util/hist.c:614 #3 0x5650d804568f in __hists__add_entry util/hist.c:754 #4 0x5650d8045bf9 in hists__add_entry util/hist.c:772 #5 0x5650d8045df1 in iter_add_single_normal_entry util/hist.c:997 #6 0x5650d8043326 in hist_entry_iter__add util/hist.c:1242 #7 0x5650d7ceeefe in perf_event__process_sample /home/matt/src/linux/tools/perf/builtin-top.c:845 #8 0x5650d7ceeefe in deliver_event /home/matt/src/linux/tools/perf/builtin-top.c:1208 #9 0x5650d7fdb51b in do_flush util/ordered-events.c:245 #10 0x5650d7fdb51b in __ordered_events__flush util/ordered-events.c:324 #11 0x5650d7ced743 in process_thread /home/matt/src/linux/tools/perf/builtin-top.c:1120 #12 0x7f757ef1f133 in start_thread nptl/pthread_create.c:442 #13 0x7f757ef9f7db in clone3 ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81 When updating hist maps it's also necessary to update the hist symbol reference because the old one gets freed in map__put(). While this bug was probably introduced with 5c24b67 ("perf tools: Replace map->referenced & maps->removed_maps with map->refcnt"), the symbol objects were leaked until c087e94 ("perf machine: Fix refcount usage when processing PERF_RECORD_KSYMBOL") was merged so the bug was masked. Fixes: c087e94 ("perf machine: Fix refcount usage when processing PERF_RECORD_KSYMBOL") Reported-by: Yunzhao Li <[email protected]> Signed-off-by: Matt Fleming (Cloudflare) <[email protected]> Cc: Ian Rogers <[email protected]> Cc: [email protected] Cc: Namhyung Kim <[email protected]> Cc: Riccardo Mancini <[email protected]> Cc: [email protected] # v5.13+ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Koichiro Den <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Jan 17, 2025
BugLink: https://bugs.launchpad.net/bugs/2089884 commit 9af2efe upstream. The fields in the hist_entry are filled on-demand which means they only have meaningful values when relevant sort keys are used. So if neither of 'dso' nor 'sym' sort keys are used, the map/symbols in the hist entry can be garbage. So it shouldn't access it unconditionally. I got a segfault, when I wanted to see cgroup profiles. $ sudo perf record -a --all-cgroups --synth=cgroup true $ sudo perf report -s cgroup Program received signal SIGSEGV, Segmentation fault. 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 48 return RC_CHK_ACCESS(map)->dso; (gdb) bt #0 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 #1 0x00005555557aa39b in map__load (map=0x0) at util/map.c:344 #2 0x00005555557aa592 in map__find_symbol (map=0x0, addr=140736115941088) at util/map.c:385 #3 0x00005555557ef000 in hists__findnew_entry (hists=0x555556039d60, entry=0x7fffffffa4c0, al=0x7fffffffa8c0, sample_self=true) at util/hist.c:644 #4 0x00005555557ef61c in __hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, block_info=0x0, sample=0x7fffffffaa90, sample_self=true, ops=0x0) at util/hist.c:761 #5 0x00005555557ef71f in hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, sample=0x7fffffffaa90, sample_self=true) at util/hist.c:779 #6 0x00005555557f00fb in iter_add_single_normal_entry (iter=0x7fffffffa900, al=0x7fffffffa8c0) at util/hist.c:1015 #7 0x00005555557f09a7 in hist_entry_iter__add (iter=0x7fffffffa900, al=0x7fffffffa8c0, max_stack_depth=127, arg=0x7fffffffbce0) at util/hist.c:1260 #8 0x00005555555ba7ce in process_sample_event (tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at builtin-report.c:334 #9 0x00005555557b30c8 in evlist__deliver_sample (evlist=0x555556039010, tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at util/session.c:1232 #10 0x00005555557b32bc in machines__deliver_event (machines=0x5555560388e8, evlist=0x555556039010, event=0x7ffff7c14128, sample=0x7fffffffaa90, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1271 #11 0x00005555557b3848 in perf_session__deliver_event (session=0x5555560386d0, event=0x7ffff7c14128, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1354 #12 0x00005555557affaf in ordered_events__deliver_event (oe=0x555556038e60, event=0x555556135aa0) at util/session.c:132 #13 0x00005555557bb605 in do_flush (oe=0x555556038e60, show_progress=false) at util/ordered-events.c:245 #14 0x00005555557bb95c in __ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND, timestamp=0) at util/ordered-events.c:324 #15 0x00005555557bba46 in ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND) at util/ordered-events.c:342 #16 0x00005555557b1b3b in perf_event__process_finished_round (tool=0x7fffffffbce0, event=0x7ffff7c15bb8, oe=0x555556038e60) at util/session.c:780 #17 0x00005555557b3b27 in perf_session__process_user_event (session=0x5555560386d0, event=0x7ffff7c15bb8, file_offset=117688, file_path=0x555556038ff0 "perf.data") at util/session.c:1406 As you can see the entry->ms.map was NULL even if he->ms.map has a value. This is because 'sym' sort key is not given, so it cannot assume whether he->ms.sym and entry->ms.sym is the same. I only checked the 'sym' sort key here as it implies 'dso' behavior (so maps are the same). Fixes: ac01c8c ("perf hist: Update hist symbol when updating maps") Signed-off-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Matt Fleming <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Koichiro Den <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Jan 23, 2025
BugLink: https://bugs.launchpad.net/bugs/2089884 commit 7d59ac0 upstream. Attaching SST PCI device to VM causes "BUG: KASAN: slab-out-of-bounds". kasan report: [ 19.411889] ================================================================== [ 19.413702] BUG: KASAN: slab-out-of-bounds in _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.415634] Read of size 8 at addr ffff888829e65200 by task cpuhp/16/113 [ 19.417368] [ 19.418627] CPU: 16 PID: 113 Comm: cpuhp/16 Tainted: G E 6.9.0 #10 [ 19.420435] Hardware name: VMware, Inc. VMware20,1/440BX Desktop Reference Platform, BIOS VMW201.00V.20192059.B64.2207280713 07/28/2022 [ 19.422687] Call Trace: [ 19.424091] <TASK> [ 19.425448] dump_stack_lvl+0x5d/0x80 [ 19.426963] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.428694] print_report+0x19d/0x52e [ 19.430206] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 19.431837] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.433539] kasan_report+0xf0/0x170 [ 19.435019] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.436709] _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.438379] ? __pfx_sched_clock_cpu+0x10/0x10 [ 19.439910] isst_if_cpu_online+0x406/0x58f [isst_if_common] [ 19.441573] ? __pfx_isst_if_cpu_online+0x10/0x10 [isst_if_common] [ 19.443263] ? ttwu_queue_wakelist+0x2c1/0x360 [ 19.444797] cpuhp_invoke_callback+0x221/0xec0 [ 19.446337] cpuhp_thread_fun+0x21b/0x610 [ 19.447814] ? __pfx_cpuhp_thread_fun+0x10/0x10 [ 19.449354] smpboot_thread_fn+0x2e7/0x6e0 [ 19.450859] ? __pfx_smpboot_thread_fn+0x10/0x10 [ 19.452405] kthread+0x29c/0x350 [ 19.453817] ? __pfx_kthread+0x10/0x10 [ 19.455253] ret_from_fork+0x31/0x70 [ 19.456685] ? __pfx_kthread+0x10/0x10 [ 19.458114] ret_from_fork_asm+0x1a/0x30 [ 19.459573] </TASK> [ 19.460853] [ 19.462055] Allocated by task 1198: [ 19.463410] kasan_save_stack+0x30/0x50 [ 19.464788] kasan_save_track+0x14/0x30 [ 19.466139] __kasan_kmalloc+0xaa/0xb0 [ 19.467465] __kmalloc+0x1cd/0x470 [ 19.468748] isst_if_cdev_register+0x1da/0x350 [isst_if_common] [ 19.470233] isst_if_mbox_init+0x108/0xff0 [isst_if_mbox_msr] [ 19.471670] do_one_initcall+0xa4/0x380 [ 19.472903] do_init_module+0x238/0x760 [ 19.474105] load_module+0x5239/0x6f00 [ 19.475285] init_module_from_file+0xd1/0x130 [ 19.476506] idempotent_init_module+0x23b/0x650 [ 19.477725] __x64_sys_finit_module+0xbe/0x130 [ 19.476506] idempotent_init_module+0x23b/0x650 [ 19.477725] __x64_sys_finit_module+0xbe/0x130 [ 19.478920] do_syscall_64+0x82/0x160 [ 19.480036] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 19.481292] [ 19.482205] The buggy address belongs to the object at ffff888829e65000 which belongs to the cache kmalloc-512 of size 512 [ 19.484818] The buggy address is located 0 bytes to the right of allocated 512-byte region [ffff888829e65000, ffff888829e65200) [ 19.487447] [ 19.488328] The buggy address belongs to the physical page: [ 19.489569] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888829e60c00 pfn:0x829e60 [ 19.491140] head: order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 19.492466] anon flags: 0x57ffffc0000840(slab|head|node=1|zone=2|lastcpupid=0x1fffff) [ 19.493914] page_type: 0xffffffff() [ 19.494988] raw: 0057ffffc0000840 ffff88810004cc80 0000000000000000 0000000000000001 [ 19.496451] raw: ffff888829e60c00 0000000080200018 00000001ffffffff 0000000000000000 [ 19.497906] head: 0057ffffc0000840 ffff88810004cc80 0000000000000000 0000000000000001 [ 19.499379] head: ffff888829e60c00 0000000080200018 00000001ffffffff 0000000000000000 [ 19.500844] head: 0057ffffc0000003 ffffea0020a79801 ffffea0020a79848 00000000ffffffff [ 19.502316] head: 0000000800000000 0000000000000000 00000000ffffffff 0000000000000000 [ 19.503784] page dumped because: kasan: bad access detected [ 19.505058] [ 19.505970] Memory state around the buggy address: [ 19.507172] ffff888829e65100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 19.508599] ffff888829e65180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 19.510013] >ffff888829e65200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 19.510014] ^ [ 19.510016] ffff888829e65280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 19.510018] ffff888829e65300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 19.515367] ================================================================== The reason for this error is physical_package_ids assigned by VMware VMM are not continuous and have gaps. This will cause value returned by topology_physical_package_id() to be more than topology_max_packages(). Here the allocation uses topology_max_packages(). The call to topology_max_packages() returns maximum logical package ID not physical ID. Hence use topology_logical_package_id() instead of topology_physical_package_id(). Fixes: 9a1aac8 ("platform/x86: ISST: PUNIT device mapping with Sub-NUMA clustering") Cc: [email protected] Acked-by: Srinivas Pandruvada <[email protected]> Signed-off-by: Zach Wade <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Koichiro Den <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Jan 23, 2025
BugLink: https://bugs.launchpad.net/bugs/2089884 commit ac01c8c upstream. AddressSanitizer found a use-after-free bug in the symbol code which manifested as 'perf top' segfaulting. ==1238389==ERROR: AddressSanitizer: heap-use-after-free on address 0x60b00c48844b at pc 0x5650d8035961 bp 0x7f751aaecc90 sp 0x7f751aaecc80 READ of size 1 at 0x60b00c48844b thread T193 #0 0x5650d8035960 in _sort__sym_cmp util/sort.c:310 #1 0x5650d8043744 in hist_entry__cmp util/hist.c:1286 #2 0x5650d8043951 in hists__findnew_entry util/hist.c:614 #3 0x5650d804568f in __hists__add_entry util/hist.c:754 #4 0x5650d8045bf9 in hists__add_entry util/hist.c:772 #5 0x5650d8045df1 in iter_add_single_normal_entry util/hist.c:997 #6 0x5650d8043326 in hist_entry_iter__add util/hist.c:1242 #7 0x5650d7ceeefe in perf_event__process_sample /home/matt/src/linux/tools/perf/builtin-top.c:845 #8 0x5650d7ceeefe in deliver_event /home/matt/src/linux/tools/perf/builtin-top.c:1208 #9 0x5650d7fdb51b in do_flush util/ordered-events.c:245 #10 0x5650d7fdb51b in __ordered_events__flush util/ordered-events.c:324 #11 0x5650d7ced743 in process_thread /home/matt/src/linux/tools/perf/builtin-top.c:1120 #12 0x7f757ef1f133 in start_thread nptl/pthread_create.c:442 #13 0x7f757ef9f7db in clone3 ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81 When updating hist maps it's also necessary to update the hist symbol reference because the old one gets freed in map__put(). While this bug was probably introduced with 5c24b67 ("perf tools: Replace map->referenced & maps->removed_maps with map->refcnt"), the symbol objects were leaked until c087e94 ("perf machine: Fix refcount usage when processing PERF_RECORD_KSYMBOL") was merged so the bug was masked. Fixes: c087e94 ("perf machine: Fix refcount usage when processing PERF_RECORD_KSYMBOL") Reported-by: Yunzhao Li <[email protected]> Signed-off-by: Matt Fleming (Cloudflare) <[email protected]> Cc: Ian Rogers <[email protected]> Cc: [email protected] Cc: Namhyung Kim <[email protected]> Cc: Riccardo Mancini <[email protected]> Cc: [email protected] # v5.13+ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Koichiro Den <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Jan 23, 2025
BugLink: https://bugs.launchpad.net/bugs/2089884 commit 9af2efe upstream. The fields in the hist_entry are filled on-demand which means they only have meaningful values when relevant sort keys are used. So if neither of 'dso' nor 'sym' sort keys are used, the map/symbols in the hist entry can be garbage. So it shouldn't access it unconditionally. I got a segfault, when I wanted to see cgroup profiles. $ sudo perf record -a --all-cgroups --synth=cgroup true $ sudo perf report -s cgroup Program received signal SIGSEGV, Segmentation fault. 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 48 return RC_CHK_ACCESS(map)->dso; (gdb) bt #0 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 #1 0x00005555557aa39b in map__load (map=0x0) at util/map.c:344 #2 0x00005555557aa592 in map__find_symbol (map=0x0, addr=140736115941088) at util/map.c:385 #3 0x00005555557ef000 in hists__findnew_entry (hists=0x555556039d60, entry=0x7fffffffa4c0, al=0x7fffffffa8c0, sample_self=true) at util/hist.c:644 #4 0x00005555557ef61c in __hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, block_info=0x0, sample=0x7fffffffaa90, sample_self=true, ops=0x0) at util/hist.c:761 #5 0x00005555557ef71f in hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, sample=0x7fffffffaa90, sample_self=true) at util/hist.c:779 #6 0x00005555557f00fb in iter_add_single_normal_entry (iter=0x7fffffffa900, al=0x7fffffffa8c0) at util/hist.c:1015 #7 0x00005555557f09a7 in hist_entry_iter__add (iter=0x7fffffffa900, al=0x7fffffffa8c0, max_stack_depth=127, arg=0x7fffffffbce0) at util/hist.c:1260 #8 0x00005555555ba7ce in process_sample_event (tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at builtin-report.c:334 #9 0x00005555557b30c8 in evlist__deliver_sample (evlist=0x555556039010, tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at util/session.c:1232 #10 0x00005555557b32bc in machines__deliver_event (machines=0x5555560388e8, evlist=0x555556039010, event=0x7ffff7c14128, sample=0x7fffffffaa90, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1271 #11 0x00005555557b3848 in perf_session__deliver_event (session=0x5555560386d0, event=0x7ffff7c14128, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1354 #12 0x00005555557affaf in ordered_events__deliver_event (oe=0x555556038e60, event=0x555556135aa0) at util/session.c:132 #13 0x00005555557bb605 in do_flush (oe=0x555556038e60, show_progress=false) at util/ordered-events.c:245 #14 0x00005555557bb95c in __ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND, timestamp=0) at util/ordered-events.c:324 #15 0x00005555557bba46 in ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND) at util/ordered-events.c:342 #16 0x00005555557b1b3b in perf_event__process_finished_round (tool=0x7fffffffbce0, event=0x7ffff7c15bb8, oe=0x555556038e60) at util/session.c:780 #17 0x00005555557b3b27 in perf_session__process_user_event (session=0x5555560386d0, event=0x7ffff7c15bb8, file_offset=117688, file_path=0x555556038ff0 "perf.data") at util/session.c:1406 As you can see the entry->ms.map was NULL even if he->ms.map has a value. This is because 'sym' sort key is not given, so it cannot assume whether he->ms.sym and entry->ms.sym is the same. I only checked the 'sym' sort key here as it implies 'dso' behavior (so maps are the same). Fixes: ac01c8c ("perf hist: Update hist symbol when updating maps") Signed-off-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Matt Fleming <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Koichiro Den <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Feb 19, 2025
…tion to perf_sched__replay() BugLink: https://bugs.launchpad.net/bugs/2097393 [ Upstream commit c690786 ] The start_work_mutex and work_done_wait_mutex are used only for the 'perf sched replay'. Put their initialization in perf_sched__replay () to reduce unnecessary actions in other commands. Simple functional testing: # perf sched record perf bench sched messaging # Running 'sched/messaging' benchmark: # 20 sender and receiver processes per group # 10 groups == 400 processes run Total time: 0.197 [sec] [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 14.952 MB perf.data (134165 samples) ] # perf sched replay run measurement overhead: 108 nsecs sleep measurement overhead: 65658 nsecs the run test took 999991 nsecs the sleep test took 1079324 nsecs nr_run_events: 42378 nr_sleep_events: 43102 nr_wakeup_events: 31852 target-less wakeups: 17 multi-target wakeups: 712 task 0 ( swapper: 0), nr_events: 10451 task 1 ( swapper: 1), nr_events: 3 task 2 ( swapper: 2), nr_events: 1 <SNIP> task 717 ( sched-messaging: 74483), nr_events: 152 task 718 ( sched-messaging: 74484), nr_events: 1944 task 719 ( sched-messaging: 74485), nr_events: 73 task 720 ( sched-messaging: 74486), nr_events: 163 task 721 ( sched-messaging: 74487), nr_events: 942 task 722 ( sched-messaging: 74488), nr_events: 78 task 723 ( sched-messaging: 74489), nr_events: 1090 ------------------------------------------------------------ #1 : 1366.507, ravg: 1366.51, cpu: 7682.70 / 7682.70 #2 : 1410.072, ravg: 1370.86, cpu: 7723.88 / 7686.82 #3 : 1396.296, ravg: 1373.41, cpu: 7568.20 / 7674.96 #4 : 1381.019, ravg: 1374.17, cpu: 7531.81 / 7660.64 #5 : 1393.826, ravg: 1376.13, cpu: 7725.25 / 7667.11 #6 : 1401.581, ravg: 1378.68, cpu: 7594.82 / 7659.88 #7 : 1381.337, ravg: 1378.94, cpu: 7371.22 / 7631.01 #8 : 1373.842, ravg: 1378.43, cpu: 7894.92 / 7657.40 #9 : 1364.697, ravg: 1377.06, cpu: 7324.91 / 7624.15 #10 : 1363.613, ravg: 1375.72, cpu: 7209.55 / 7582.69 # echo $? 0 Signed-off-by: Yang Jihong <[email protected]> Signed-off-by: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/r/[email protected] Stable-dep-of: 1a5efc9 ("libsubcmd: Don't free the usage string") Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Manuel Diewald <[email protected]> Signed-off-by: Koichiro Den <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Feb 19, 2025
…f_sched__{lat|map|replay}()
BugLink: https://bugs.launchpad.net/bugs/2097393
[ Upstream commit bd2cdf2 ]
The curr_pid and cpu_last_switched are used only for the
'perf sched replay/latency/map'. Put their initialization in
perf_sched__{lat|map|replay () to reduce unnecessary actions in other
commands.
Simple functional testing:
# perf sched record perf bench sched messaging
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 0.209 [sec]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 16.456 MB perf.data (147907 samples) ]
# perf sched lat
-------------------------------------------------------------------------------------------------------------------------------------------
Task | Runtime ms | Switches | Avg delay ms | Max delay ms | Max delay start | Max delay end |
-------------------------------------------------------------------------------------------------------------------------------------------
sched-messaging:(401) | 2990.699 ms | 38705 | avg: 0.661 ms | max: 67.046 ms | max start: 456532.624830 s | max end: 456532.691876 s
qemu-system-x86:(7) | 179.764 ms | 2191 | avg: 0.152 ms | max: 21.857 ms | max start: 456532.576434 s | max end: 456532.598291 s
sshd:48125 | 0.522 ms | 2 | avg: 0.037 ms | max: 0.046 ms | max start: 456532.514610 s | max end: 456532.514656 s
<SNIP>
ksoftirqd/11:82 | 0.063 ms | 1 | avg: 0.005 ms | max: 0.005 ms | max start: 456532.769366 s | max end: 456532.769371 s
kworker/9:0-mm_:34624 | 0.233 ms | 20 | avg: 0.004 ms | max: 0.007 ms | max start: 456532.690804 s | max end: 456532.690812 s
migration/13:93 | 0.000 ms | 1 | avg: 0.004 ms | max: 0.004 ms | max start: 456532.512669 s | max end: 456532.512674 s
-----------------------------------------------------------------------------------------------------------------
TOTAL: | 3180.750 ms | 41368 |
---------------------------------------------------
# echo $?
0
# perf sched map
*A0 456532.510141 secs A0 => migration/0:15
*. 456532.510171 secs . => swapper:0
. *B0 456532.510261 secs B0 => migration/1:21
. *. 456532.510279 secs
<SNIP>
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . . . 456532.785979 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . . 456532.786054 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . 456532.786127 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . 456532.786197 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 456532.786270 secs
# echo $?
0
# perf sched replay
run measurement overhead: 108 nsecs
sleep measurement overhead: 66473 nsecs
the run test took 1000002 nsecs
the sleep test took 1082686 nsecs
nr_run_events: 49334
nr_sleep_events: 50054
nr_wakeup_events: 34701
target-less wakeups: 165
multi-target wakeups: 766
task 0 ( swapper: 0), nr_events: 15419
task 1 ( swapper: 1), nr_events: 1
task 2 ( swapper: 2), nr_events: 1
<SNIP>
task 715 ( sched-messaging: 110248), nr_events: 1438
task 716 ( sched-messaging: 110249), nr_events: 512
task 717 ( sched-messaging: 110250), nr_events: 500
task 718 ( sched-messaging: 110251), nr_events: 537
task 719 ( sched-messaging: 110252), nr_events: 823
------------------------------------------------------------
#1 : 1325.288, ravg: 1325.29, cpu: 7823.35 / 7823.35
#2 : 1363.606, ravg: 1329.12, cpu: 7655.53 / 7806.56
#3 : 1349.494, ravg: 1331.16, cpu: 7544.80 / 7780.39
#4 : 1311.488, ravg: 1329.19, cpu: 7495.13 / 7751.86
#5 : 1309.902, ravg: 1327.26, cpu: 7266.65 / 7703.34
#6 : 1309.535, ravg: 1325.49, cpu: 7843.86 / 7717.39
#7 : 1316.482, ravg: 1324.59, cpu: 7854.41 / 7731.09
#8 : 1366.604, ravg: 1328.79, cpu: 7955.81 / 7753.57
#9 : 1326.286, ravg: 1328.54, cpu: 7466.86 / 7724.90
#10 : 1356.653, ravg: 1331.35, cpu: 7566.60 / 7709.07
# echo $?
0
Signed-off-by: Yang Jihong <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Stable-dep-of: 1a5efc9 ("libsubcmd: Don't free the usage string")
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Manuel Diewald <[email protected]>
Signed-off-by: Koichiro Den <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Apr 7, 2025
BugLink: https://bugs.launchpad.net/bugs/1942215 When the Timer operation is called, there are no arguments, and acpi_ex_resolve_operands will be called with an out-of-bounds stack pointer as num_operands is 0. This does not usually cause any problems, as acpi_ex_resolve_operands will ignore the parameter when the operation requires no arguments, as is the case. However, when the code is compiled with UBSAN, it will trigger, leading to an oops with invalid opcode on Linux. Fix it by using a NULL parameter when num_operands is 0. [ 8.285428] invalid opcode: 0000 [#1] SMP NOPTI [ 8.286436] CPU: 18 PID: 1522 Comm: systemd-udevd Not tainted 5.15.0-10-generic #10 [ 8.287505] Hardware name: Intel Corporation S2600WFD/S2600WFD, BIOS SE5C620.86B.0D.01.0395.022720191340 02/27/2019 [ 8.288495] RIP: 0010:acpi_ds_exec_end_op+0x1be/0x7a6 [ 8.289658] Code: 7b 0a 48 89 da 44 89 45 d4 48 98 48 8d 34 c3 e8 f8 3c 01 00 44 8b 45 d4 85 c0 41 89 c6 75 22 eb 9e 44 89 c0 41 80 f8 0b 76 02 <0f> 0b 48 8b 04 c5 c0 c0 ca aa 48 89 df ff d0 0f 1f 00 41 89 c4 eb [ 8.291858] RSP: 0018:ffffc38561a3f6d0 EFLAGS: 00010286 [ 8.292888] RAX: 0000000000000000 RBX: ffffa0aa87c91800 RCX: 0000000000000040 [ 8.294056] RDX: ffffffffffffffff RSI: ffffffffaacabf40 RDI: 00000000000002cb [ 8.295839] RBP: ffffc38561a3f700 R08: 0000000000000000 R09: ffffa0aa9f5a1000 [ 8.296030] IPMI message handler: version 39.2 [ 8.297554] R10: ffffa0aa89cdec00 R11: 0000000000000003 R12: 0000000000000000 [ 8.297556] R13: ffffa0aa9f5a10a0 R14: 0000000000000000 R15: 0000000000000000 [ 8.297558] FS: 00007f68ba26b8c0(0000) GS:ffffa0d60ca80000(0000) knlGS:0000000000000000 [ 8.297560] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8.297561] CR2: 00007fdbb3b9eec8 CR3: 00000001176ba001 CR4: 00000000007706e0 [ 8.297563] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8.297564] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 8.297565] PKRU: 55555554 [ 8.297566] Call Trace: [ 8.297569] acpi_ps_parse_loop+0x587/0x660 [ 8.297574] acpi_ps_parse_aml+0x1af/0x552 [ 8.297578] acpi_ps_execute_method+0x208/0x2ca [ 8.297580] acpi_ns_evaluate+0x34e/0x4f0 [ 8.297583] acpi_evaluate_object+0x18e/0x3b4 [ 8.297587] acpi_evaluate_dsm+0xb3/0x120 [ 8.297593] ? acpi_evaluate_dsm+0xb3/0x120 [ 8.297596] nfit_intel_shutdown_status+0xed/0x1a0 [nfit] [ 8.297606] acpi_nfit_add_dimm+0x3cb/0x660 [nfit] [ 8.297614] acpi_nfit_register_dimms+0x141/0x460 [nfit] [ 8.297620] acpi_nfit_init+0x54f/0x620 [nfit] [ 8.327895] acpi_nfit_add+0x18c/0x1f0 [nfit] [ 8.329341] acpi_device_probe+0x49/0x170 [ 8.330815] really_probe+0x209/0x410 [ 8.330820] __driver_probe_device+0x109/0x180 [ 8.330823] driver_probe_device+0x23/0x90 [ 8.330825] __driver_attach+0xac/0x1b0 [ 8.330828] ? __device_attach_driver+0xe0/0xe0 [ 8.330831] bus_for_each_dev+0x7c/0xc0 [ 8.330834] driver_attach+0x1e/0x20 [ 8.330835] bus_add_driver+0x135/0x1f0 [ 8.330837] driver_register+0x95/0xf0 [ 8.330840] acpi_bus_register_driver+0x39/0x50 [ 8.344874] nfit_init+0x168/0x1000 [nfit] [ 8.344882] ? 0xffffffffc0735000 [ 8.344885] do_one_initcall+0x46/0x1d0 [ 8.350927] ? kmem_cache_alloc_trace+0x18c/0x2c0 [ 8.350933] do_init_module+0x62/0x290 [ 8.350940] load_module+0xaa3/0xb30 [ 8.350944] __do_sys_finit_module+0xbf/0x120 [ 8.350948] __x64_sys_finit_module+0x18/0x20 [ 8.350951] do_syscall_64+0x59/0xc0 [ 8.350955] ? exit_to_user_mode_prepare+0x37/0xb0 [ 8.350959] ? irqentry_exit_to_user_mode+0x9/0x20 [ 8.350963] ? irqentry_exit+0x19/0x30 [ 8.350965] ? exc_page_fault+0x89/0x160 [ 8.350968] ? asm_exc_page_fault+0x8/0x30 [ 8.350971] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 8.350975] RIP: 0033:0x7f68ba7fc94d [ 8.350978] Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d b3 64 0f 00 f7 d8 64 89 01 48 [ 8.350980] RSP: 002b:00007ffc7e0b93c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 8.350984] RAX: ffffffffffffffda RBX: 000055bbb29a4a00 RCX: 00007f68ba7fc94d [ 8.350985] RDX: 0000000000000000 RSI: 00007f68ba9923fe RDI: 0000000000000006 [ 8.350987] RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000000 [ 8.350988] R10: 0000000000000006 R11: 0000000000000246 R12: 00007f68ba9923fe [ 8.350989] R13: 000055bbb28e3a20 R14: 000055bbb297d940 R15: 000055bbb297ea60 Signed-off-by: Thadeu Lima de Souza Cascardo <[email protected]> Acked-by: Andrea Righi <[email protected]> Signed-off-by: Paolo Pisati <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Apr 14, 2025
BugLink: https://bugs.launchpad.net/bugs/1942215 When the Timer operation is called, there are no arguments, and acpi_ex_resolve_operands will be called with an out-of-bounds stack pointer as num_operands is 0. This does not usually cause any problems, as acpi_ex_resolve_operands will ignore the parameter when the operation requires no arguments, as is the case. However, when the code is compiled with UBSAN, it will trigger, leading to an oops with invalid opcode on Linux. Fix it by using a NULL parameter when num_operands is 0. [ 8.285428] invalid opcode: 0000 [#1] SMP NOPTI [ 8.286436] CPU: 18 PID: 1522 Comm: systemd-udevd Not tainted 5.15.0-10-generic #10 [ 8.287505] Hardware name: Intel Corporation S2600WFD/S2600WFD, BIOS SE5C620.86B.0D.01.0395.022720191340 02/27/2019 [ 8.288495] RIP: 0010:acpi_ds_exec_end_op+0x1be/0x7a6 [ 8.289658] Code: 7b 0a 48 89 da 44 89 45 d4 48 98 48 8d 34 c3 e8 f8 3c 01 00 44 8b 45 d4 85 c0 41 89 c6 75 22 eb 9e 44 89 c0 41 80 f8 0b 76 02 <0f> 0b 48 8b 04 c5 c0 c0 ca aa 48 89 df ff d0 0f 1f 00 41 89 c4 eb [ 8.291858] RSP: 0018:ffffc38561a3f6d0 EFLAGS: 00010286 [ 8.292888] RAX: 0000000000000000 RBX: ffffa0aa87c91800 RCX: 0000000000000040 [ 8.294056] RDX: ffffffffffffffff RSI: ffffffffaacabf40 RDI: 00000000000002cb [ 8.295839] RBP: ffffc38561a3f700 R08: 0000000000000000 R09: ffffa0aa9f5a1000 [ 8.296030] IPMI message handler: version 39.2 [ 8.297554] R10: ffffa0aa89cdec00 R11: 0000000000000003 R12: 0000000000000000 [ 8.297556] R13: ffffa0aa9f5a10a0 R14: 0000000000000000 R15: 0000000000000000 [ 8.297558] FS: 00007f68ba26b8c0(0000) GS:ffffa0d60ca80000(0000) knlGS:0000000000000000 [ 8.297560] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8.297561] CR2: 00007fdbb3b9eec8 CR3: 00000001176ba001 CR4: 00000000007706e0 [ 8.297563] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8.297564] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 8.297565] PKRU: 55555554 [ 8.297566] Call Trace: [ 8.297569] acpi_ps_parse_loop+0x587/0x660 [ 8.297574] acpi_ps_parse_aml+0x1af/0x552 [ 8.297578] acpi_ps_execute_method+0x208/0x2ca [ 8.297580] acpi_ns_evaluate+0x34e/0x4f0 [ 8.297583] acpi_evaluate_object+0x18e/0x3b4 [ 8.297587] acpi_evaluate_dsm+0xb3/0x120 [ 8.297593] ? acpi_evaluate_dsm+0xb3/0x120 [ 8.297596] nfit_intel_shutdown_status+0xed/0x1a0 [nfit] [ 8.297606] acpi_nfit_add_dimm+0x3cb/0x660 [nfit] [ 8.297614] acpi_nfit_register_dimms+0x141/0x460 [nfit] [ 8.297620] acpi_nfit_init+0x54f/0x620 [nfit] [ 8.327895] acpi_nfit_add+0x18c/0x1f0 [nfit] [ 8.329341] acpi_device_probe+0x49/0x170 [ 8.330815] really_probe+0x209/0x410 [ 8.330820] __driver_probe_device+0x109/0x180 [ 8.330823] driver_probe_device+0x23/0x90 [ 8.330825] __driver_attach+0xac/0x1b0 [ 8.330828] ? __device_attach_driver+0xe0/0xe0 [ 8.330831] bus_for_each_dev+0x7c/0xc0 [ 8.330834] driver_attach+0x1e/0x20 [ 8.330835] bus_add_driver+0x135/0x1f0 [ 8.330837] driver_register+0x95/0xf0 [ 8.330840] acpi_bus_register_driver+0x39/0x50 [ 8.344874] nfit_init+0x168/0x1000 [nfit] [ 8.344882] ? 0xffffffffc0735000 [ 8.344885] do_one_initcall+0x46/0x1d0 [ 8.350927] ? kmem_cache_alloc_trace+0x18c/0x2c0 [ 8.350933] do_init_module+0x62/0x290 [ 8.350940] load_module+0xaa3/0xb30 [ 8.350944] __do_sys_finit_module+0xbf/0x120 [ 8.350948] __x64_sys_finit_module+0x18/0x20 [ 8.350951] do_syscall_64+0x59/0xc0 [ 8.350955] ? exit_to_user_mode_prepare+0x37/0xb0 [ 8.350959] ? irqentry_exit_to_user_mode+0x9/0x20 [ 8.350963] ? irqentry_exit+0x19/0x30 [ 8.350965] ? exc_page_fault+0x89/0x160 [ 8.350968] ? asm_exc_page_fault+0x8/0x30 [ 8.350971] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 8.350975] RIP: 0033:0x7f68ba7fc94d [ 8.350978] Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d b3 64 0f 00 f7 d8 64 89 01 48 [ 8.350980] RSP: 002b:00007ffc7e0b93c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 8.350984] RAX: ffffffffffffffda RBX: 000055bbb29a4a00 RCX: 00007f68ba7fc94d [ 8.350985] RDX: 0000000000000000 RSI: 00007f68ba9923fe RDI: 0000000000000006 [ 8.350987] RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000000 [ 8.350988] R10: 0000000000000006 R11: 0000000000000246 R12: 00007f68ba9923fe [ 8.350989] R13: 000055bbb28e3a20 R14: 000055bbb297d940 R15: 000055bbb297ea60 Signed-off-by: Thadeu Lima de Souza Cascardo <[email protected]> Acked-by: Andrea Righi <[email protected]> Signed-off-by: Paolo Pisati <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Apr 22, 2025
BugLink: https://bugs.launchpad.net/bugs/2103829 [ Upstream commit c7b87ce ] libtraceevent parses and returns an array of argument fields, sometimes larger than RAW_SYSCALL_ARGS_NUM (6) because it includes "__syscall_nr", idx will traverse to index 6 (7th element) whereas sc->fmt->arg holds 6 elements max, creating an out-of-bounds access. This runtime error is found by UBsan. The error message: $ sudo UBSAN_OPTIONS=print_stacktrace=1 ./perf trace -a --max-events=1 builtin-trace.c:1966:35: runtime error: index 6 out of bounds for type 'syscall_arg_fmt [6]' #0 0x5c04956be5fe in syscall__alloc_arg_fmts /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:1966 #1 0x5c04956c0510 in trace__read_syscall_info /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:2110 #2 0x5c04956c372b in trace__syscall_info /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:2436 #3 0x5c04956d2f39 in trace__init_syscalls_bpf_prog_array_maps /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:3897 #4 0x5c04956d6d25 in trace__run /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:4335 #5 0x5c04956e112e in cmd_trace /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:5502 #6 0x5c04956eda7d in run_builtin /home/howard/hw/linux-perf/tools/perf/perf.c:351 #7 0x5c04956ee0a8 in handle_internal_command /home/howard/hw/linux-perf/tools/perf/perf.c:404 #8 0x5c04956ee37f in run_argv /home/howard/hw/linux-perf/tools/perf/perf.c:448 #9 0x5c04956ee8e9 in main /home/howard/hw/linux-perf/tools/perf/perf.c:556 #10 0x79eb3622a3b7 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 #11 0x79eb3622a47a in __libc_start_main_impl ../csu/libc-start.c:360 #12 0x5c04955422d4 in _start (/home/howard/hw/linux-perf/tools/perf/perf+0x4e02d4) (BuildId: 5b6cab2d59e96a4341741765ad6914a4d784dbc6) 0.000 ( 0.014 ms): Chrome_ChildIO/117244 write(fd: 238, buf: !, count: 1) = 1 Fixes: 5e58fcf ("perf trace: Allow allocating sc->arg_fmt even without the syscall tracepoint") Signed-off-by: Howard Chu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Noah Wager <[email protected]> Signed-off-by: Mehmet Basaran <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Apr 25, 2025
BugLink: https://bugs.launchpad.net/bugs/2106026 [ Upstream commit c7b87ce ] libtraceevent parses and returns an array of argument fields, sometimes larger than RAW_SYSCALL_ARGS_NUM (6) because it includes "__syscall_nr", idx will traverse to index 6 (7th element) whereas sc->fmt->arg holds 6 elements max, creating an out-of-bounds access. This runtime error is found by UBsan. The error message: $ sudo UBSAN_OPTIONS=print_stacktrace=1 ./perf trace -a --max-events=1 builtin-trace.c:1966:35: runtime error: index 6 out of bounds for type 'syscall_arg_fmt [6]' #0 0x5c04956be5fe in syscall__alloc_arg_fmts /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:1966 #1 0x5c04956c0510 in trace__read_syscall_info /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:2110 #2 0x5c04956c372b in trace__syscall_info /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:2436 #3 0x5c04956d2f39 in trace__init_syscalls_bpf_prog_array_maps /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:3897 #4 0x5c04956d6d25 in trace__run /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:4335 #5 0x5c04956e112e in cmd_trace /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:5502 #6 0x5c04956eda7d in run_builtin /home/howard/hw/linux-perf/tools/perf/perf.c:351 #7 0x5c04956ee0a8 in handle_internal_command /home/howard/hw/linux-perf/tools/perf/perf.c:404 #8 0x5c04956ee37f in run_argv /home/howard/hw/linux-perf/tools/perf/perf.c:448 #9 0x5c04956ee8e9 in main /home/howard/hw/linux-perf/tools/perf/perf.c:556 #10 0x79eb3622a3b7 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 #11 0x79eb3622a47a in __libc_start_main_impl ../csu/libc-start.c:360 #12 0x5c04955422d4 in _start (/home/howard/hw/linux-perf/tools/perf/perf+0x4e02d4) (BuildId: 5b6cab2d59e96a4341741765ad6914a4d784dbc6) 0.000 ( 0.014 ms): Chrome_ChildIO/117244 write(fd: 238, buf: !, count: 1) = 1 Fixes: 5e58fcf ("perf trace: Allow allocating sc->arg_fmt even without the syscall tracepoint") Signed-off-by: Howard Chu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Manuel Diewald <[email protected]> Signed-off-by: Mehmet Basaran <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
May 27, 2025
BugLink: https://bugs.launchpad.net/bugs/2107212 [ Upstream commit 888751e ] perf test 11 hwmon fails on s390 with this error # ./perf test -Fv 11 --- start --- ---- end ---- 11.1: Basic parsing test : Ok --- start --- Testing 'temp_test_hwmon_event1' Using CPUID IBM,3931,704,A01,3.7,002f temp_test_hwmon_event1 -> hwmon_a_test_hwmon_pmu/temp_test_hwmon_event1/ FAILED tests/hwmon_pmu.c:189 Unexpected config for 'temp_test_hwmon_event1', 292470092988416 != 655361 ---- end ---- 11.2: Parsing without PMU name : FAILED! --- start --- Testing 'hwmon_a_test_hwmon_pmu/temp_test_hwmon_event1/' FAILED tests/hwmon_pmu.c:189 Unexpected config for 'hwmon_a_test_hwmon_pmu/temp_test_hwmon_event1/', 292470092988416 != 655361 ---- end ---- 11.3: Parsing with PMU name : FAILED! # The root cause is in member test_event::config which is initialized to 0xA0001 or 655361. During event parsing a long list event parsing functions are called and end up with this gdb call stack: #0 hwmon_pmu__config_term (hwm=0x168dfd0, attr=0x3ffffff5ee8, term=0x168db60, err=0x3ffffff81c8) at util/hwmon_pmu.c:623 #1 hwmon_pmu__config_terms (pmu=0x168dfd0, attr=0x3ffffff5ee8, terms=0x3ffffff5ea8, err=0x3ffffff81c8) at util/hwmon_pmu.c:662 #2 0x00000000012f870c in perf_pmu__config_terms (pmu=0x168dfd0, attr=0x3ffffff5ee8, terms=0x3ffffff5ea8, zero=false, apply_hardcoded=false, err=0x3ffffff81c8) at util/pmu.c:1519 #3 0x00000000012f88a4 in perf_pmu__config (pmu=0x168dfd0, attr=0x3ffffff5ee8, head_terms=0x3ffffff5ea8, apply_hardcoded=false, err=0x3ffffff81c8) at util/pmu.c:1545 #4 0x00000000012680c4 in parse_events_add_pmu (parse_state=0x3ffffff7fb8, list=0x168dc00, pmu=0x168dfd0, const_parsed_terms=0x3ffffff6090, auto_merge_stats=true, alternate_hw_config=10) at util/parse-events.c:1508 #5 0x00000000012684c6 in parse_events_multi_pmu_add (parse_state=0x3ffffff7fb8, event_name=0x168ec10 "temp_test_hwmon_event1", hw_config=10, const_parsed_terms=0x0, listp=0x3ffffff6230, loc_=0x3ffffff70e0) at util/parse-events.c:1592 #6 0x00000000012f0e4e in parse_events_parse (_parse_state=0x3ffffff7fb8, scanner=0x16878c0) at util/parse-events.y:293 #7 0x00000000012695a0 in parse_events__scanner (str=0x3ffffff81d8 "temp_test_hwmon_event1", input=0x0, parse_state=0x3ffffff7fb8) at util/parse-events.c:1867 #8 0x000000000126a1e8 in __parse_events (evlist=0x168b580, str=0x3ffffff81d8 "temp_test_hwmon_event1", pmu_filter=0x0, err=0x3ffffff81c8, fake_pmu=false, warn_if_reordered=true, fake_tp=false) at util/parse-events.c:2136 #9 0x00000000011e36aa in parse_events (evlist=0x168b580, str=0x3ffffff81d8 "temp_test_hwmon_event1", err=0x3ffffff81c8) at /root/linux/tools/perf/util/parse-events.h:41 #10 0x00000000011e3e64 in do_test (i=0, with_pmu=false, with_alias=false) at tests/hwmon_pmu.c:164 #11 0x00000000011e422c in test__hwmon_pmu (with_pmu=false) at tests/hwmon_pmu.c:219 #12 0x00000000011e431c in test__hwmon_pmu_without_pmu (test=0x1610368 <suite.hwmon_pmu>, subtest=1) at tests/hwmon_pmu.c:23 where the attr::config is set to value 292470092988416 or 0x10a0000000000 in line 625 of file ./util/hwmon_pmu.c: attr->config = key.type_and_num; However member key::type_and_num is defined as union and bit field: union hwmon_pmu_event_key { long type_and_num; struct { int num :16; enum hwmon_type type :8; }; }; s390 is big endian and Intel is little endian architecture. The events for the hwmon dummy pmu have num = 1 or num = 2 and type is set to HWMON_TYPE_TEMP (which is 10). On s390 this assignes member key::type_and_num the value of 0x10a0000000000 (which is 292470092988416) as shown in above trace output. Fix this and export the structure/union hwmon_pmu_event_key so the test shares the same implementation as the event parsing functions for union and bit fields. This should avoid endianess issues on all platforms. Output after: # ./perf test -F 11 11.1: Basic parsing test : Ok 11.2: Parsing without PMU name : Ok 11.3: Parsing with PMU name : Ok # Fixes: 531ee0f ("perf test: Add hwmon "PMU" test") Signed-off-by: Thomas Richter <[email protected]> Reviewed-by: Ian Rogers <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Manuel Diewald <[email protected]> Signed-off-by: Timo Aaltonen <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
May 27, 2025
BugLink: https://bugs.launchpad.net/bugs/2109367 commit 7bcfedd upstream. When the size of the range invalidated is larger than rounddown_pow_of_two(ULONG_MAX), The function macro roundup_pow_of_two(length) will hit an out-of-bounds shift [1]. Use a full TLB invalidation for such cases. v2: - Use a define for the range size limit over which we use a full TLB invalidation. (Lucas) - Use a better calculation of the limit. [1]: [ 39.202421] ------------[ cut here ]------------ [ 39.202657] UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13 [ 39.202673] shift exponent 64 is too large for 64-bit type 'long unsigned int' [ 39.202688] CPU: 8 UID: 0 PID: 3129 Comm: xe_exec_system_ Tainted: G U 6.14.0+ #10 [ 39.202690] Tainted: [U]=USER [ 39.202690] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 2001 02/01/2023 [ 39.202691] Call Trace: [ 39.202692] <TASK> [ 39.202695] dump_stack_lvl+0x6e/0xa0 [ 39.202699] ubsan_epilogue+0x5/0x30 [ 39.202701] __ubsan_handle_shift_out_of_bounds.cold+0x61/0xe6 [ 39.202705] xe_gt_tlb_invalidation_range.cold+0x1d/0x3a [xe] [ 39.202800] ? find_held_lock+0x2b/0x80 [ 39.202803] ? mark_held_locks+0x40/0x70 [ 39.202806] xe_svm_invalidate+0x459/0x700 [xe] [ 39.202897] drm_gpusvm_notifier_invalidate+0x4d/0x70 [drm_gpusvm] [ 39.202900] __mmu_notifier_release+0x1f5/0x270 [ 39.202905] exit_mmap+0x40e/0x450 [ 39.202912] __mmput+0x45/0x110 [ 39.202914] exit_mm+0xc5/0x130 [ 39.202916] do_exit+0x21c/0x500 [ 39.202918] ? lockdep_hardirqs_on_prepare+0xdb/0x190 [ 39.202920] do_group_exit+0x36/0xa0 [ 39.202922] get_signal+0x8f8/0x900 [ 39.202926] arch_do_signal_or_restart+0x35/0x100 [ 39.202930] syscall_exit_to_user_mode+0x1fc/0x290 [ 39.202932] do_syscall_64+0xa1/0x180 [ 39.202934] ? do_user_addr_fault+0x59f/0x8a0 [ 39.202937] ? lock_release+0xd2/0x2a0 [ 39.202939] ? do_user_addr_fault+0x5a9/0x8a0 [ 39.202942] ? trace_hardirqs_off+0x4b/0xc0 [ 39.202944] ? clear_bhb_loop+0x25/0x80 [ 39.202946] ? clear_bhb_loop+0x25/0x80 [ 39.202947] ? clear_bhb_loop+0x25/0x80 [ 39.202950] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 39.202952] RIP: 0033:0x7fa945e543e1 [ 39.202961] Code: Unable to access opcode bytes at 0x7fa945e543b7. [ 39.202962] RSP: 002b:00007ffca8fb4170 EFLAGS: 00000293 [ 39.202963] RAX: 000000000000003d RBX: 0000000000000000 RCX: 00007fa945e543e3 [ 39.202964] RDX: 0000000000000000 RSI: 00007ffca8fb41ac RDI: 00000000ffffffff [ 39.202964] RBP: 00007ffca8fb4190 R08: 0000000000000000 R09: 00007fa945f600a0 [ 39.202965] R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000000 [ 39.202966] R13: 00007fa9460dd310 R14: 00007ffca8fb41ac R15: 0000000000000000 [ 39.202970] </TASK> [ 39.202970] ---[ end trace ]--- Fixes: 332dd01 ("drm/xe: Add range based TLB invalidations") Cc: Matthew Brost <[email protected]> Cc: Rodrigo Vivi <[email protected]> Cc: <[email protected]> # v6.8+ Signed-off-by: Thomas Hellström <[email protected]> Reviewed-by: Lucas De Marchi <[email protected]> #v1 Link: https://lore.kernel.org/r/[email protected] (cherry picked from commit b88f48f) Signed-off-by: Lucas De Marchi <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Manuel Diewald <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Hello!
Just wanted to point out that the aforementioned kernel breaks my polaris 15 keyboard after resume from suspend.
The keyboard just doesn't work, funnily enough kde connect's keyboard works though!
External USB plugged keyboards don't work either!
Booting into the older 6.5 kernel fixes this.
Additionally I've noticed that even suspend sometimes fails, only locking KDE. Suspending again usually works correctly though.
I am on default TuxedoOS install.
The text was updated successfully, but these errors were encountered: